This object indicates the operational status derived from data
gathered by the OAM protocol for an UNI.
'unknown'
Status is not known; possible reason could be caused
by the OAM protocol has not provided information
regarding the UNI.
'notReachable'
UNI is not reachable; possible reason could be caused
by the OAM protocol messages having not been received
for an excessive length of time.
'up'
UNI is active, up, and able to pass traffic.
'down'
UNI is down and not passing traffic.
'adminDown'
UNI has been administratively put in down state.
'localExcessiveError'
UNI has experienced excessive number of invalid frames
on the local end of the physical link between UNI-C
and UNI-N.
'remoteExcessiveError'
UNI has experienced excessive number of invalid frames
on the remote side of the physical connection between
UNI-C and UNI-N.
'localInLoopback'
UNI is loopback on the local end of the physical link
between UNI-C and UNI-N.
'remoteInLoopback'
UNI is looped back on the remote end of the link
between UNI-C and UNI-N.
'localOutLoopback'
UNI just transitioned out of loopback on the local end
of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback'
UNI just transitioned out of loopback on the remote
end of the physcial link between UNI-C and UNI-N.
Parsed from file CISCO-EVC-MIB.mib
Module: CISCO-EVC-MIB
This object indicates the operational status derived from data
gathered by the OAM protocol for an UNI.
'unknown'
Status is not known; possible reason could be caused
by the OAM protocol has not provided information
regarding the UNI.
'notReachable'
UNI is not reachable; possible reason could be caused
by the OAM protocol messages having not been received
for an excessive length of time.
'up'
UNI is active, up, and able to pass traffic.
'down'
UNI is down and not passing traffic.
'adminDown'
UNI has been administratively put in down state.
'localExcessiveError'
UNI has experienced excessive number of invalid frames
on the local end of the physical link between UNI-C
and UNI-N.
'remoteExcessiveError'
UNI has experienced excessive number of invalid frames
on the remote side of the physical connection between
UNI-C and UNI-N.
'localInLoopback'
UNI is loopback on the local end of the physical link
between UNI-C and UNI-N.
'remoteInLoopback'
UNI is looped back on the remote end of the link
between UNI-C and UNI-N.
'localOutLoopback'
UNI just transitioned out of loopback on the local end
of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback'
UNI just transitioned out of loopback on the remote
end of the physcial link between UNI-C and UNI-N.
This object indicates the operational status derived from data
gathered by the OAM protocol for an UNI.
'unknown'
Status is not known; possible reason could be caused
by the OAM protocol has not provided information
regarding the UNI.
'notReachable'
UNI is not reachable; possible reason could be caused
by the OAM protocol messages having not been received
for an excessive length of time.
'up'
UNI is active, up, and able to pass traffic.
'down'
UNI is down and not passing traffic.
'adminDown'
UNI has been administratively put in down state.
'localExcessiveError'
UNI has experienced excessive number of invalid frames
on the local end of the physical link between UNI-C
and UNI-N.
'remoteExcessiveError'
UNI has experienced excessive number of invalid frames
on the remote side of the physical connection between
UNI-C and UNI-N.
'localInLoopback'
UNI is loopback on the local end of the physical link
between UNI-C and UNI-N.
'remoteInLoopback'
UNI is looped back on the remote end of the link
between UNI-C and UNI-N.
'localOutLoopback'
UNI just transitioned out of loopback on the local end
of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback'
UNI just transitioned out of loopback on the remote
end of the physcial link between UNI-C and UNI-N.
Parsed from file CISCO-EVC-MIB.my.txt
Company: None
Module: CISCO-EVC-MIB
This object indicates the operational status derived from data
gathered by the OAM protocol for an UNI.
'unknown'
Status is not known; possible reason could be caused
by the OAM protocol has not provided information
regarding the UNI.
'notReachable'
UNI is not reachable; possible reason could be caused
by the OAM protocol messages having not been received
for an excessive length of time.
'up'
UNI is active, up, and able to pass traffic.
'down'
UNI is down and not passing traffic.
'adminDown'
UNI has been administratively put in down state.
'localExcessiveError'
UNI has experienced excessive number of invalid frames
on the local end of the physical link between UNI-C
and UNI-N.
'remoteExcessiveError'
UNI has experienced excessive number of invalid frames
on the remote side of the physical connection between
UNI-C and UNI-N.
'localInLoopback'
UNI is loopback on the local end of the physical link
between UNI-C and UNI-N.
'remoteInLoopback'
UNI is looped back on the remote end of the link
between UNI-C and UNI-N.
'localOutLoopback'
UNI just transitioned out of loopback on the local end
of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback'
UNI just transitioned out of loopback on the remote
end of the physcial link between UNI-C and UNI-N.
cevcEvcUniOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notReachable(2), up(3), down(4), adminDown(5), localExcessiveError(6), remoteExcessiveError(7), localInLoopback(8), remoteInLoopback(9), localOutLoopback(10), remoteOutLoopback(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status derived from data gathered by the OAM protocol for an UNI. 'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI. 'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time. 'up' UNI is active, up, and able to pass traffic. 'down' UNI is down and not passing traffic. 'adminDown' UNI has been administratively put in down state. 'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N. 'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N. 'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N. 'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N. 'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N. 'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N." ::= { cevcEvcUniEntry 3 }
cevcEvcUniOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notReachable(2), up(3), down(4), adminDown(5), localExcessiveError(6), remoteExcessiveError(7), localInLoopback(8), remoteInLoopback(9), localOutLoopback(10), remoteOutLoopback(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the operational status derived from data gathered by the OAM protocol for an UNI. 'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI. 'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time. 'up' UNI is active, up, and able to pass traffic. 'down' UNI is down and not passing traffic. 'adminDown' UNI has been administratively put in down state. 'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N. 'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N. 'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N. 'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N. 'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N. 'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N." ::= { cevcEvcUniEntry 3 }
Vendor: Cisco
Module: CISCO-EVC-MIB
[Automatically extracted from oidview.com]
cevcEvcUniOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notReachable(2), up(3), down(4), adminDown(5), localExcessiveError(6), remoteExcessiveError(7), localInLoopback(8), remoteInLoopback(9), localOutLoopback(10), remoteOutLoopback(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status derived from data gathered by the OAM protocol for an UNI. 'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI. 'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time. 'up' UNI is active, up, and able to pass traffic. 'down' UNI is down and not passing traffic. 'adminDown' UNI has been administratively put in down state. 'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N. 'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N. 'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N. 'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N. 'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N. 'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N." ::= { cevcEvcUniEntry 3 }
cevcEvcUniOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notReachable(2), up(3), down(4), adminDown(5), localExcessiveError(6), remoteExcessiveError(7), localInLoopback(8), remoteInLoopback(9), localOutLoopback(10), remoteOutLoopback(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status derived from data gathered by the OAM protocol for an UNI. 'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI. 'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time. 'up' UNI is active, up, and able to pass traffic. 'down' UNI is down and not passing traffic. 'adminDown' UNI has been administratively put in down state. 'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N. 'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N. 'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N. 'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N. 'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N. 'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N." ::= { cevcEvcUniEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.613.1.3.3.1.1 | cevcEvcUniIndex | 0 | 0 | This object indicates an arbitrary integer-value that uniquely identifies the UNI in an EVC. |
1.3.6.1.4.1.9.9.613.1.3.3.1.2 | cevcEvcUniId | 0 | 0 | This object indicates the string-value identifying the UNI that is in the EVC. For UNI that is local, this value is the same as … |
1.3.6.1.4.1.9.9.613.1.3.3.1.4 | cevcEvcLocalUniIfIndex | 0 | 0 | When the UNI is local on the system, this object specifies the ifIndex of the UNI. The value '0' of this column indicates remote… |