Each entry represents the tuning parameters for
an interface type. These entries are applicable
only when object clrRrmParametersPicoCellMode is
is set to 'picoCellv2'.
Parsed from file CISCO-LWAPP-RRM-MIB.mib
Module: CISCO-LWAPP-RRM-MIB
Each entry represents the tuning parameters for
an interface type. These entries are applicable
only when object clrRrmParametersPicoCellMode is
is set to 'picoCellv2'.
Each entry represents the tuning parameters for
an interface type. These entries are applicable
only when object clrRrmParametersPicoCellMode is
is set to 'picoCellv2'.
Parsed from file CISCO-LWAPP-RRM-MIB.my.txt
Company: None
Module: CISCO-LWAPP-RRM-MIB
Each entry represents the tuning parameters for
an interface type. These entries are applicable
only when object clrRrmParametersPicoCellMode is
is set to 'picoCellv2'.
clrRrmTupleEntry OBJECT-TYPE SYNTAX ClrRrmTupleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the tuning parameters for an interface type. These entries are applicable only when object clrRrmParametersPicoCellMode is is set to 'picoCellv2'." INDEX { clrRrmParametersType } ::= { clrRrmTupleTable 1 }
clrRrmTupleEntry OBJECT-TYPE SYNTAX ClrRrmTupleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents the tuning parameters for an interface type. These entries are applicable only when object clrRrmParametersPicoCellMode is is set to 'picoCellv2'." INDEX { clrRrmParametersType } ::= { clrRrmTupleTable 1 }
Vendor: Cisco
Module: CISCO-LWAPP-RRM-MIB
[Automatically extracted from oidview.com]
clrRrmTupleEntry OBJECT-TYPE SYNTAX ClrRrmTupleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the tuning parameters for an interface type. These entries are applicable only when object clrRrmParametersPicoCellMode is is set to 'picoCellv2'." INDEX { clrRrmParametersType } ::= { clrRrmTupleTable 1 }
clrRrmTupleEntry OBJECT-TYPE SYNTAX ClrRrmTupleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the tuning parameters for an interface type. These entries are applicable only when object clrRrmParametersPicoCellMode is is set to 'picoCellv2'." INDEX { clrRrmParametersType } ::= { clrRrmTupleTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.615.1.1.2.1.1 | clrRrmTupleRxSenseThresholdMin | 0 | 0 | This object represents the minimum value configured for receiver's sensitivity threshold. This value must be less than the value … |
1.3.6.1.4.1.9.9.615.1.1.2.1.2 | clrRrmTupleRxSenseThresholdMax | 0 | 0 | This object represents the maximum value configured for receiver's sensitivity threshold. This value must be greater than the val… |
1.3.6.1.4.1.9.9.615.1.1.2.1.3 | clrRrmTupleRxSenseThreshold | 0 | 0 | This object represents the current value for receiver's sensitivity threshold. This value is sent to the APs that join the contr… |
1.3.6.1.4.1.9.9.615.1.1.2.1.4 | clrRrmTupleCcaSenseThresholdMin | 0 | 0 | This object represents the minimum value configured for clear channel (CCA) sensitivity threshold. This value must be less than t… |
1.3.6.1.4.1.9.9.615.1.1.2.1.5 | clrRrmTupleCcaSenseThresholdMax | 0 | 0 | This object represents the maximum value configured for clear channel (CCA) sensitivity threshold. This value must be greater tha… |
1.3.6.1.4.1.9.9.615.1.1.2.1.6 | clrRrmTupleCcaSenseThreshold | 0 | 0 | This object represents the current value for clear channel (CCA) sensitivity. This value is sent to the APs that join the control… |
1.3.6.1.4.1.9.9.615.1.1.2.1.7 | clrRrmTupleTransmitPowerLevelMin | 0 | 0 | This object represents the minimum value configured for transmit power level. This value must be less than the value configured f… |
1.3.6.1.4.1.9.9.615.1.1.2.1.8 | clrRrmTupleTransmitPowerLevelMax | 0 | 0 | This object represents the maximum value configured for transmit power level. This value must be greater than the value for clrRr… |
1.3.6.1.4.1.9.9.615.1.1.2.1.9 | clrRrmTupleTransmitPowerLevel | 0 | 0 | This object represents the current value for transmit power level. This value is sent to the APs that join the controller. The AP… |
1.3.6.1.4.1.9.9.615.1.1.2.1.10 | clrRrmTupleSetDefault | 0 | 0 | This object restores the other objects in this table to default value. Setting this value to 'true' wil restore defaults as indic… |