Reference record for OID 1.3.6.1.4.1.9.9.63.1.2.2.1.7



parent
1.3.6.1.4.1.9.9.63.1.2.2.1 (cvVoicePeerCfgEntry)
node code
7
node name
cvVoicePeerCfgEchoCancellerTest
dot oid
1.3.6.1.4.1.9.9.63.1.2.2.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoVoiceDialControlMIB(63) cvdcMIBObjects(1) cvPeer(2) cvVoicePeerCfgTable(2) cvVoicePeerCfgEntry(1) cvVoicePeerCfgEchoCancellerTest(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoVoiceDialControlMIB/cvdcMIBObjects/cvPeer/cvVoicePeerCfgTable/cvVoicePeerCfgEntry/cvVoicePeerCfgEchoCancellerTest
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/63/1/2/2/1/7

    Description by circitor

    This object specifies which, if any, test to run in the
    echo canceller when a call from the network is connected.
    echoCancellerTestNone - do not run a test.
    echoCancellerG168Test2A - run ITU-T G.168 Test 2A.
    echoCancellerG168Test2B - run ITU-T G.168 Test 2B.
    echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
    echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
    echoCancellerG168Test3A - run ITU-T G.168 Test 3A.
    echoCancellerG168Test3B - run ITU-T G.168 Test 3B.
    echoCancellerG168Test3C - run ITU-T G.168 Test 3C.
    echoCancellerG168Test4 - run ITU-T G.168 Test 4.
    echoCancellerG168Test5 - run ITU-T G.168 Test 5.
    echoCancellerG168Test6 - run ITU-T G.168 Test 6.
    echoCancellerG168Test7 - run ITU-T G.168 Test 7.
    echoCancellerG168Test9 - run ITU-T G.168 Test 9.

    Parsed from file CISCO-VOICE-DIAL-CONTROL-MIB.mib
    Module: CISCO-VOICE-DIAL-CONTROL-MIB

    Description by cisco_v1

    This object specifies which, if any, test to run in the
    echo canceller when a call from the network is connected.
    echoCancellerTestNone - do not run a test.
    echoCancellerG168Test2A - run ITU-T G.168 Test 2A.
    echoCancellerG168Test2B - run ITU-T G.168 Test 2B.
    echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
    echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
    echoCancellerG168Test3A - run ITU-T G.168 Test 3A.
    echoCancellerG168Test3B - run ITU-T G.168 Test 3B.
    echoCancellerG168Test3C - run ITU-T G.168 Test 3C.
    echoCancellerG168Test4 - run ITU-T G.168 Test 4.
    echoCancellerG168Test5 - run ITU-T G.168 Test 5.
    echoCancellerG168Test6 - run ITU-T G.168 Test 6.
    echoCancellerG168Test7 - run ITU-T G.168 Test 7.
    echoCancellerG168Test9 - run ITU-T G.168 Test 9.

    Description by mibdepot

    This object specifies which, if any, test to run in the
    echo canceller when a call from the network is connected.
    echoCancellerTestNone - do not run a test.
    echoCancellerG168Test2A - run ITU-T G.168 Test 2A.
    echoCancellerG168Test2B - run ITU-T G.168 Test 2B.
    echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
    echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
    echoCancellerG168Test3A - run ITU-T G.168 Test 3A.
    echoCancellerG168Test3B - run ITU-T G.168 Test 3B.
    echoCancellerG168Test3C - run ITU-T G.168 Test 3C.
    echoCancellerG168Test4 - run ITU-T G.168 Test 4.
    echoCancellerG168Test5 - run ITU-T G.168 Test 5.
    echoCancellerG168Test6 - run ITU-T G.168 Test 6.
    echoCancellerG168Test7 - run ITU-T G.168 Test 7.
    echoCancellerG168Test9 - run ITU-T G.168 Test 9.

    Parsed from file CISCO-VOICE-DIAL-CONTROL-MIB.my.txt
    Company: None
    Module: CISCO-VOICE-DIAL-CONTROL-MIB

    Description by cisco

    This object specifies which, if any, test to run in the
    echo canceller when a call from the network is connected.
    echoCancellerTestNone - do not run a test.
    echoCancellerG168Test2A - run ITU-T G.168 Test 2A.
    echoCancellerG168Test2B - run ITU-T G.168 Test 2B.
    echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
    echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
    echoCancellerG168Test3A - run ITU-T G.168 Test 3A.
    echoCancellerG168Test3B - run ITU-T G.168 Test 3B.
    echoCancellerG168Test3C - run ITU-T G.168 Test 3C.
    echoCancellerG168Test4 - run ITU-T G.168 Test 4.
    echoCancellerG168Test5 - run ITU-T G.168 Test 5.
    echoCancellerG168Test6 - run ITU-T G.168 Test 6.
    echoCancellerG168Test7 - run ITU-T G.168 Test 7.
    echoCancellerG168Test9 - run ITU-T G.168 Test 9.

    Information by circitor

    cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE
    SYNTAX          INTEGER  {
                        echoCancellerTestNone(1),
                        echoCancellerG168Test2A(2),
                        echoCancellerG168Test2B(3),
                        echoCancellerG168Test2Ca(4),
                        echoCancellerG168Test2Cb(5),
                        echoCancellerG168Test3A(6),
                        echoCancellerG168Test3B(7),
                        echoCancellerG168Test3C(8),
                        echoCancellerG168Test4(9),
                        echoCancellerG168Test6(10),
                        echoCancellerG168Test9(11),
                        echoCancellerG168Test5(12),
                        echoCancellerG168Test7(13)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies which, if any, test to run in the
        echo canceller when a call from the network is connected.
        echoCancellerTestNone    - do not run a test.
        echoCancellerG168Test2A  - run ITU-T G.168 Test 2A.
        echoCancellerG168Test2B  - run ITU-T G.168 Test 2B.
        echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
        echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
        echoCancellerG168Test3A  - run ITU-T G.168 Test 3A.
        echoCancellerG168Test3B  - run ITU-T G.168 Test 3B.
        echoCancellerG168Test3C  - run ITU-T G.168 Test 3C.
        echoCancellerG168Test4   - run ITU-T G.168 Test 4.
        echoCancellerG168Test5   - run ITU-T G.168 Test 5.
        echoCancellerG168Test6   - run ITU-T G.168 Test 6.
        echoCancellerG168Test7   - run ITU-T G.168 Test 7.
        echoCancellerG168Test9   - run ITU-T G.168 Test 9."
    REFERENCE
        "ITU-T G.168(04/2000): Section 6.4 Tests and requirements
             for performance with input signals applied to the send and
             receive paths."
    DEFVAL          { echoCancellerTestNone } 
    ::= { cvVoicePeerCfgEntry 7 }

    Information by cisco_v1

    cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE
    SYNTAX INTEGER {
        echoCancellerTestNone(1),
        echoCancellerG168Test2A(2),
        echoCancellerG168Test2B(3),
        echoCancellerG168Test2Ca(4),
        echoCancellerG168Test2Cb(5),
        echoCancellerG168Test3A(6),
        echoCancellerG168Test3B(7),
        echoCancellerG168Test3C(8),
        echoCancellerG168Test4(9),
        echoCancellerG168Test6(10),
        echoCancellerG168Test9(11),
        echoCancellerG168Test5(12),
        echoCancellerG168Test7(13)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies which, if any, test to run in the
        echo canceller when a call from the network is connected.
        echoCancellerTestNone    - do not run a test.
        echoCancellerG168Test2A  - run ITU-T G.168 Test 2A.
        echoCancellerG168Test2B  - run ITU-T G.168 Test 2B.
        echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
        echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
        echoCancellerG168Test3A  - run ITU-T G.168 Test 3A.
        echoCancellerG168Test3B  - run ITU-T G.168 Test 3B.
        echoCancellerG168Test3C  - run ITU-T G.168 Test 3C.
        echoCancellerG168Test4   - run ITU-T G.168 Test 4.
        echoCancellerG168Test5   - run ITU-T G.168 Test 5.
        echoCancellerG168Test6   - run ITU-T G.168 Test 6.
        echoCancellerG168Test7   - run ITU-T G.168 Test 7.
        echoCancellerG168Test9   - run ITU-T G.168 Test 9."
    REFERENCE
        "ITU-T G.168(04/2000): Section 6.4 Tests and requirements
             for performance with input signals applied to the send and
             receive paths."
    DEFVAL { echoCancellerTestNone }
    ::= { cvVoicePeerCfgEntry 7 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-VOICE-DIAL-CONTROL-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE
    SYNTAX          INTEGER  {
                        echoCancellerTestNone(1),
                        echoCancellerG168Test2A(2),
                        echoCancellerG168Test2B(3),
                        echoCancellerG168Test2Ca(4),
                        echoCancellerG168Test2Cb(5),
                        echoCancellerG168Test3A(6),
                        echoCancellerG168Test3B(7),
                        echoCancellerG168Test3C(8),
                        echoCancellerG168Test4(9),
                        echoCancellerG168Test6(10),
                        echoCancellerG168Test9(11),
                        echoCancellerG168Test5(12),
                        echoCancellerG168Test7(13)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies which, if any, test to run in the
        echo canceller when a call from the network is connected.
        echoCancellerTestNone    - do not run a test.
        echoCancellerG168Test2A  - run ITU-T G.168 Test 2A.
        echoCancellerG168Test2B  - run ITU-T G.168 Test 2B.
        echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
        echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
        echoCancellerG168Test3A  - run ITU-T G.168 Test 3A.
        echoCancellerG168Test3B  - run ITU-T G.168 Test 3B.
        echoCancellerG168Test3C  - run ITU-T G.168 Test 3C.
        echoCancellerG168Test4   - run ITU-T G.168 Test 4.
        echoCancellerG168Test5   - run ITU-T G.168 Test 5.
        echoCancellerG168Test6   - run ITU-T G.168 Test 6.
        echoCancellerG168Test7   - run ITU-T G.168 Test 7.
        echoCancellerG168Test9   - run ITU-T G.168 Test 9."
    REFERENCE
        "ITU-T G.168(04/2000): Section 6.4 Tests and requirements
             for performance with input signals applied to the send and
             receive paths."
    DEFVAL          { echoCancellerTestNone } 
    ::= { cvVoicePeerCfgEntry 7 }

    Information by cisco

    cvVoicePeerCfgEchoCancellerTest OBJECT-TYPE
    SYNTAX          INTEGER  {
                        echoCancellerTestNone(1),
                        echoCancellerG168Test2A(2),
                        echoCancellerG168Test2B(3),
                        echoCancellerG168Test2Ca(4),
                        echoCancellerG168Test2Cb(5),
                        echoCancellerG168Test3A(6),
                        echoCancellerG168Test3B(7),
                        echoCancellerG168Test3C(8),
                        echoCancellerG168Test4(9),
                        echoCancellerG168Test6(10),
                        echoCancellerG168Test9(11),
                        echoCancellerG168Test5(12),
                        echoCancellerG168Test7(13)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies which, if any, test to run in the
        echo canceller when a call from the network is connected.
        echoCancellerTestNone    - do not run a test.
        echoCancellerG168Test2A  - run ITU-T G.168 Test 2A.
        echoCancellerG168Test2B  - run ITU-T G.168 Test 2B.
        echoCancellerG168Test2Ca - run ITU-T G.168 Test 2C(a).
        echoCancellerG168Test2Cb - run ITU-T G.168 Test 2C(b).
        echoCancellerG168Test3A  - run ITU-T G.168 Test 3A.
        echoCancellerG168Test3B  - run ITU-T G.168 Test 3B.
        echoCancellerG168Test3C  - run ITU-T G.168 Test 3C.
        echoCancellerG168Test4   - run ITU-T G.168 Test 4.
        echoCancellerG168Test5   - run ITU-T G.168 Test 5.
        echoCancellerG168Test6   - run ITU-T G.168 Test 6.
        echoCancellerG168Test7   - run ITU-T G.168 Test 7.
        echoCancellerG168Test9   - run ITU-T G.168 Test 9."
    REFERENCE
        "ITU-T G.168(04/2000): Section 6.4 Tests and requirements
             for performance with input signals applied to the send and
             receive paths."
    DEFVAL          { echoCancellerTestNone } 
    ::= { cvVoicePeerCfgEntry 7 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.63.1.2.2.1.1 cvVoicePeerCfgSessionTarget 0 0 The object specifies the session target of the peer.
    Session Targets definitions:
    The session target has the syntax used by the I…
    1.3.6.1.4.1.9.9.63.1.2.2.1.2 cvVoicePeerCfgDialDigitsPrefix 0 0 The object specifies the prefix of the dial digits for the
    peer. The dial digits prefix is sent to telephony
    interface before the…
    1.3.6.1.4.1.9.9.63.1.2.2.1.3 cvVoicePeerCfgDIDCallEnable 0 0 The object enables/disables the DID call treatment for
    incoming DNIS digits.
    true - treat the incoming DNIS digits as if the dig…
    1.3.6.1.4.1.9.9.63.1.2.2.1.4 cvVoicePeerCfgCasGroup 0 0 The object specifies the CAS group number of a CAS
    capable T1/E1 that is in the dialCtlPeerCfgLowerIf object
    of RFC2128.
    This obj…
    1.3.6.1.4.1.9.9.63.1.2.2.1.5 cvVoicePeerCfgRegisterE164 0 0 This object specifies that the E.164 number specified in
    the dialCtlPeerCfgOriginateAddress field of the associated
    dialCtlPeerCf…
    1.3.6.1.4.1.9.9.63.1.2.2.1.6 cvVoicePeerCfgForwardDigits 0 0 This object specifies the number of dialed digits to
    forward to the remote destination in the setup message.
    The object can take …