This table lists the resources to which a user belonging
to a role can access.
A role may be restricted from accessing various
resources of a device. This table lists the resources
that a role can access.
If for a role there is no entry in this table, then
restriction, if any, is determined by the
ccrePermitAllPolicies object in the ccreRoleTable.
Each resource (VSAN, VLAN or Interface) to which a role
has access to, has a separate entry in the table.
For e.g. if a role has access to VLAN 1, 2, 6 and 7;
VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table
will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for
Interfaces.
Entries in this table can be created/deleted using
ccreRoleScopeRowStatus.
The table provides the same information as
'commonRoleScopeRestriction', 'commonRoleScope1' and
'commonRoleScope2' but in a different way.
The object 'commonRoleScope1' and 'commonRoleScope2'
are 256*8 bit mask with each bit representing a VLAN.
'commonRoleScope1' identifies VLANS 1 to 2048 whereas
'commonRoleScope2' identifies VLANS 2049 to 4096.
In this table, there is a separate entry for each VSAN,
along with separate entry for each VLAN and Interface
to which a role has access. The purpose of this table
is to remove the limit of 4096 that are supported by
'commonRoleTable'.
All entries in this table are persistent across device
reboots
Parsed from file CISCO-COMMON-ROLES-EXT-MIB.mib
Module: CISCO-COMMON-ROLES-EXT-MIB
This table lists the resources to which a user belonging
to a role can access.
A role may be restricted from accessing various
resources of a device. This table lists the resources
that a role can access.
If for a role there is no entry in this table, then
restriction, if any, is determined by the
ccrePermitAllPolicies object in the ccreRoleTable.
Each resource (VSAN, VLAN or Interface) to which a role
has access to, has a separate entry in the table.
For e.g. if a role has access to VLAN 1, 2, 6 and 7;
VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table
will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for
Interfaces.
Entries in this table can be created/deleted using
ccreRoleScopeRowStatus.
The table provides the same information as
'commonRoleScopeRestriction', 'commonRoleScope1' and
'commonRoleScope2' but in a different way.
The object 'commonRoleScope1' and 'commonRoleScope2'
are 256*8 bit mask with each bit representing a VLAN.
'commonRoleScope1' identifies VLANS 1 to 2048 whereas
'commonRoleScope2' identifies VLANS 2049 to 4096.
In this table, there is a separate entry for each VSAN,
along with separate entry for each VLAN and Interface
to which a role has access. The purpose of this table
is to remove the limit of 4096 that are supported by
'commonRoleTable'.
All entries in this table are persistent across device
reboots
This table lists the resources to which a user belonging
to a role can access.
A role may be restricted from accessing various
resources of a device. This table lists the resources
that a role can access.
If for a role there is no entry in this table, then
restriction, if any, is determined by the
ccrePermitAllPolicies object in the ccreRoleTable.
Each resource (VSAN, VLAN or Interface) to which a role
has access to, has a separate entry in the table.
For e.g. if a role has access to VLAN 1, 2, 6 and 7;
VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table
will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for
Interfaces.
Entries in this table can be created/deleted using
ccreRoleScopeRowStatus.
The table provides the same information as
'commonRoleScopeRestriction', 'commonRoleScope1' and
'commonRoleScope2' but in a different way.
The object 'commonRoleScope1' and 'commonRoleScope2'
are 256*8 bit mask with each bit representing a VLAN.
'commonRoleScope1' identifies VLANS 1 to 2048 whereas
'commonRoleScope2' identifies VLANS 2049 to 4096.
In this table, there is a separate entry for each VSAN,
along with separate entry for each VLAN and Interface
to which a role has access. The purpose of this table
is to remove the limit of 4096 that are supported by
'commonRoleTable'.
All entries in this table are persistent across device
reboots
Parsed from file CISCO-COMMON-ROLES-EXT-MIB.my.txt
Company: None
Module: CISCO-COMMON-ROLES-EXT-MIB
This table lists the resources to which a user belonging
to a role can access.
A role may be restricted from accessing various
resources of a device. This table lists the resources
that a role can access.
If for a role there is no entry in this table, then
restriction, if any, is determined by the
ccrePermitAllPolicies object in the ccreRoleTable.
Each resource (VSAN, VLAN or Interface) to which a role
has access to, has a separate entry in the table.
For e.g. if a role has access to VLAN 1, 2, 6 and 7;
VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table
will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for
Interfaces.
Entries in this table can be created/deleted using
ccreRoleScopeRowStatus.
The table provides the same information as
'commonRoleScopeRestriction', 'commonRoleScope1' and
'commonRoleScope2' but in a different way.
The object 'commonRoleScope1' and 'commonRoleScope2'
are 256*8 bit mask with each bit representing a VLAN.
'commonRoleScope1' identifies VLANS 1 to 2048 whereas
'commonRoleScope2' identifies VLANS 2049 to 4096.
In this table, there is a separate entry for each VSAN,
along with separate entry for each VLAN and Interface
to which a role has access. The purpose of this table
is to remove the limit of 4096 that are supported by
'commonRoleTable'.
All entries in this table are persistent across device
reboots
ccreRoleScopeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcreRoleScopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the resources to which a user belonging to a role can access. A role may be restricted from accessing various resources of a device. This table lists the resources that a role can access. If for a role there is no entry in this table, then restriction, if any, is determined by the ccrePermitAllPolicies object in the ccreRoleTable. Each resource (VSAN, VLAN or Interface) to which a role has access to, has a separate entry in the table. For e.g. if a role has access to VLAN 1, 2, 6 and 7; VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for Interfaces. Entries in this table can be created/deleted using ccreRoleScopeRowStatus. The table provides the same information as 'commonRoleScopeRestriction', 'commonRoleScope1' and 'commonRoleScope2' but in a different way. The object 'commonRoleScope1' and 'commonRoleScope2' are 256*8 bit mask with each bit representing a VLAN. 'commonRoleScope1' identifies VLANS 1 to 2048 whereas 'commonRoleScope2' identifies VLANS 2049 to 4096. In this table, there is a separate entry for each VSAN, along with separate entry for each VLAN and Interface to which a role has access. The purpose of this table is to remove the limit of 4096 that are supported by 'commonRoleTable'. All entries in this table are persistent across device reboots" ::= { ccreRoleConfig 3 }
ccreRoleScopeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcreRoleScopeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the resources to which a user belonging to a role can access. A role may be restricted from accessing various resources of a device. This table lists the resources that a role can access. If for a role there is no entry in this table, then restriction, if any, is determined by the ccrePermitAllPolicies object in the ccreRoleTable. Each resource (VSAN, VLAN or Interface) to which a role has access to, has a separate entry in the table. For e.g. if a role has access to VLAN 1, 2, 6 and 7; VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for Interfaces. Entries in this table can be created/deleted using ccreRoleScopeRowStatus. The table provides the same information as 'commonRoleScopeRestriction', 'commonRoleScope1' and 'commonRoleScope2' but in a different way. The object 'commonRoleScope1' and 'commonRoleScope2' are 256*8 bit mask with each bit representing a VLAN. 'commonRoleScope1' identifies VLANS 1 to 2048 whereas 'commonRoleScope2' identifies VLANS 2049 to 4096. In this table, there is a separate entry for each VSAN, along with separate entry for each VLAN and Interface to which a role has access. The purpose of this table is to remove the limit of 4096 that are supported by 'commonRoleTable'. All entries in this table are persistent across device reboots" ::= { ccreRoleConfig 3 }
Vendor: Cisco
Module: CISCO-COMMON-ROLES-EXT-MIB
[Automatically extracted from oidview.com]
ccreRoleScopeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcreRoleScopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the resources to which a user belonging to a role can access. A role may be restricted from accessing various resources of a device. This table lists the resources that a role can access. If for a role there is no entry in this table, then restriction, if any, is determined by the ccrePermitAllPolicies object in the ccreRoleTable. Each resource (VSAN, VLAN or Interface) to which a role has access to, has a separate entry in the table. For e.g. if a role has access to VLAN 1, 2, 6 and 7; VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for Interfaces. Entries in this table can be created/deleted using ccreRoleScopeRowStatus. The table provides the same information as 'commonRoleScopeRestriction', 'commonRoleScope1' and 'commonRoleScope2' but in a different way. The object 'commonRoleScope1' and 'commonRoleScope2' are 256*8 bit mask with each bit representing a VLAN. 'commonRoleScope1' identifies VLANS 1 to 2048 whereas 'commonRoleScope2' identifies VLANS 2049 to 4096. In this table, there is a separate entry for each VSAN, along with separate entry for each VLAN and Interface to which a role has access. The purpose of this table is to remove the limit of 4096 that are supported by 'commonRoleTable'. All entries in this table are persistent across device reboots" ::= { ccreRoleConfig 3 }
ccreRoleScopeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcreRoleScopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the resources to which a user belonging to a role can access. A role may be restricted from accessing various resources of a device. This table lists the resources that a role can access. If for a role there is no entry in this table, then restriction, if any, is determined by the ccrePermitAllPolicies object in the ccreRoleTable. Each resource (VSAN, VLAN or Interface) to which a role has access to, has a separate entry in the table. For e.g. if a role has access to VLAN 1, 2, 6 and 7; VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for Interfaces. Entries in this table can be created/deleted using ccreRoleScopeRowStatus. The table provides the same information as 'commonRoleScopeRestriction', 'commonRoleScope1' and 'commonRoleScope2' but in a different way. The object 'commonRoleScope1' and 'commonRoleScope2' are 256*8 bit mask with each bit representing a VLAN. 'commonRoleScope1' identifies VLANS 1 to 2048 whereas 'commonRoleScope2' identifies VLANS 2049 to 4096. In this table, there is a separate entry for each VSAN, along with separate entry for each VLAN and Interface to which a role has access. The purpose of this table is to remove the limit of 4096 that are supported by 'commonRoleTable'. All entries in this table are persistent across device reboots" ::= { ccreRoleConfig 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.651.1.2.3.1 | ccreRoleScopeEntry | 4 | 4 | An entry (conceptual row) in the ccreRoleScopeTable. There is one entry for each different scope value of a Role. If a Role 'R1' … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.651.1.2.2 | ccreRoleTable | 1 | 5 | This table lists all the common roles configured on this device. Common roles are the user roles which are common across SNMP and… |