Reference record for OID 1.3.6.1.4.1.9.9.692.1.4.1

parent: 1.3.6.1.4.1.9.9.692.1.4 (cfmConditions)
node code: 1
node name: cfmConditionTable
dot oid: 1.3.6.1.4.1.9.9.692.1.4.1
type: OBJECT-TYPE
asn1 oid: {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoFlowMonitorMIB(692) ciscoFlowMonitorMIBObjects(1) cfmConditions(4) cfmConditionTable(1)}
iri oid: /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoFlowMonitorMIB/ciscoFlowMonitorMIBObjects/cfmConditions/cfmConditionTable
iri by oid_info: /ISO/Identified-Organization/6/1/4/1/9/9/692/1/4/1

Information by circitor

cfmConditionTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CfmConditionEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the standing conditions monitored by the
        device.  The table groups descriptions for standing conditions
        into condition profiles.

        The figure below illustrates the relationship between a flow
        monitor and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one flow monitor.  In this case, the
        instance of cfmFlowMonitorConditionsProfile for each of these
        flow monitors would reference the same conditions profile.

        +
        | flow monitor 1                                 |
        |                                                |
        | cfmFlowMonitorConditionsProfile.1 = 42 
        |                                             |  |
        | cfmFlowMonitorConditions.1                  |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 42       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between a traffic
        flow and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one traffic flow.  In this case, the
        instance of cfmFlowMetricsConditionsProfile for each of these
        traffic flows would reference the same conditions profile.

        +
        | traffic flow 201                               |
        |                                                |
        | cfmFlowMetricsConditionsProfile.1.201 = 54 -+  |
        |                                             |  |
        | cfmFlowMetricsConditions.1.201              |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 54       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between the
        description of a standing condition and an alarm group if the
        standing condition indicates that the device aggregates the
        standing condition into an alarm group (i.e., the corresponding
        instance of cfmConditionAlarm is 'grouped').

        +
        | conditions profile 42                   |
        | +
        | | cfmConditionAlarm.42.9 = 'grouped'  |<
        | | cfmConditionAlarmGroup.42.9 = 4 -+  | |      |
        | +
        |                                    |    |   |  |
        +
                                             V        |  |
        +
        | alarm group 4                           |   |  |
        |                                         |   |  |
        | cfmAlarmGroupConditionsProfile.4 = 42 
        | cfmAlarmGroupConditionId.4 = 9 
        |                                         |
        +
    ::= { cfmConditions 1 }

Information by cisco_v1

cfmConditionTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CfmConditionEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists the standing conditions monitored by the
        device.  The table groups descriptions for standing conditions
        into condition profiles.
        
        The figure below illustrates the relationship between a flow
        monitor and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one flow monitor.  In this case, the
        instance of cfmFlowMonitorConditionsProfile for each of these
        flow monitors would reference the same conditions profile.
        
        +
        | flow monitor 1                                 |
        |                                                |
        | cfmFlowMonitorConditionsProfile.1 = 42 
        |                                             |  |
        | cfmFlowMonitorConditions.1                  |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 42       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +
        
        The figure below illustrates the relationship between a traffic
        flow and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one traffic flow.  In this case, the
        instance of cfmFlowMetricsConditionsProfile for each of these
        traffic flows would reference the same conditions profile.
        
        +
        | traffic flow 201                               |
        |                                                |
        | cfmFlowMetricsConditionsProfile.1.201 = 54 -+  |
        |                                             |  |
        | cfmFlowMetricsConditions.1.201              |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 54       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +
        
        The figure below illustrates the relationship between the
        description of a standing condition and an alarm group if the
        standing condition indicates that the device aggregates the
        standing condition into an alarm group (i.e., the corresponding
        instance of cfmConditionAlarm is 'grouped').
        
        +
        | conditions profile 42                   |
        | +
        | | cfmConditionAlarm.42.9 = 'grouped'  |<
        | | cfmConditionAlarmGroup.42.9 = 4 -+  | |      |
        | +
        |                                    |    |   |  |
        +
                                             V        |  |
        +
        | alarm group 4                           |   |  |
        |                                         |   |  |
        | cfmAlarmGroupConditionsProfile.4 = 42 
        | cfmAlarmGroupConditionId.4 = 9 
        |                                         |
        +
    ::= { cfmConditions 1 }

Information by oid_info

Vendor: Cisco
Module: CISCO-FLOW-MONITOR-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

cfmConditionTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CfmConditionEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the standing conditions monitored by the
        device.  The table groups descriptions for standing conditions
        into condition profiles.

        The figure below illustrates the relationship between a flow
        monitor and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one flow monitor.  In this case, the
        instance of cfmFlowMonitorConditionsProfile for each of these
        flow monitors would reference the same conditions profile.

        +
        | flow monitor 1                                 |
        |                                                |
        | cfmFlowMonitorConditionsProfile.1 = 42 
        |                                             |  |
        | cfmFlowMonitorConditions.1                  |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 42       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between a traffic
        flow and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one traffic flow.  In this case, the
        instance of cfmFlowMetricsConditionsProfile for each of these
        traffic flows would reference the same conditions profile.

        +
        | traffic flow 201                               |
        |                                                |
        | cfmFlowMetricsConditionsProfile.1.201 = 54 -+  |
        |                                             |  |
        | cfmFlowMetricsConditions.1.201              |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 54       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between the
        description of a standing condition and an alarm group if the
        standing condition indicates that the device aggregates the
        standing condition into an alarm group (i.e., the corresponding
        instance of cfmConditionAlarm is 'grouped').

        +
        | conditions profile 42                   |
        | +
        | | cfmConditionAlarm.42.9 = 'grouped'  |<
        | | cfmConditionAlarmGroup.42.9 = 4 -+  | |      |
        | +
        |                                    |    |   |  |
        +
                                             V        |  |
        +
        | alarm group 4                           |   |  |
        |                                         |   |  |
        | cfmAlarmGroupConditionsProfile.4 = 42 
        | cfmAlarmGroupConditionId.4 = 9 
        |                                         |
        +
    ::= { cfmConditions 1 }

Information by cisco

cfmConditionTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CfmConditionEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table lists the standing conditions monitored by the
        device.  The table groups descriptions for standing conditions
        into condition profiles.

        The figure below illustrates the relationship between a flow
        monitor and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one flow monitor.  In this case, the
        instance of cfmFlowMonitorConditionsProfile for each of these
        flow monitors would reference the same conditions profile.

        +
        | flow monitor 1                                 |
        |                                                |
        | cfmFlowMonitorConditionsProfile.1 = 42 
        |                                             |  |
        | cfmFlowMonitorConditions.1                  |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 42       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between a traffic
        flow and a conditions profile.  Observe that a conditions
        profile can contain the descriptions for the standing conditions
        monitored for more than one traffic flow.  In this case, the
        instance of cfmFlowMetricsConditionsProfile for each of these
        traffic flows would reference the same conditions profile.

        +
        | traffic flow 201                               |
        |                                                |
        | cfmFlowMetricsConditionsProfile.1.201 = 54 -+  |
        |                                             |  |
        | cfmFlowMetricsConditions.1.201              |  |
        |  N       2 1 0                              |  |
        | +-+-...-+-+-+-+                             |  |
        | | |     | | | |                             |  |
        | +-+-...-+-+-+-+                             |  |
        |  ^       ^ ^ ^                              |  |
        |  |       | | |                              |  |
        +
           |       | | |                              |
           |       | | |                              V               
           |       | | |               +
           |       | | |               | conditions profile 54       |
           |       | | |               | +
           |       | | +
           |       | |                 | +
           |       | |                 | +
           |       | +
           |       |                   | +
           |       |                   | +
           |       +
           |                           | +
           |                           |     :                       |
           |                           |     :                       |
           |                           | +
           +
                                       | +
                                       +

        The figure below illustrates the relationship between the
        description of a standing condition and an alarm group if the
        standing condition indicates that the device aggregates the
        standing condition into an alarm group (i.e., the corresponding
        instance of cfmConditionAlarm is 'grouped').

        +
        | conditions profile 42                   |
        | +
        | | cfmConditionAlarm.42.9 = 'grouped'  |<
        | | cfmConditionAlarmGroup.42.9 = 4 -+  | |      |
        | +
        |                                    |    |   |  |
        +
                                             V        |  |
        +
        | alarm group 4                           |   |  |
        |                                         |   |  |
        | cfmAlarmGroupConditionsProfile.4 = 42 
        | cfmAlarmGroupConditionId.4 = 9 
        |                                         |
        +
    ::= { cfmConditions 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (1)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.9.9.692.1.4.1.1	cfmConditionEntry	17	17	An entry describes a standing condition monitored by the device. The cfmConditionTable groups descriptions for standing conditio…

Brothers (1)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.9.9.692.1.4.2	cfmConditionTableChanged	1	1	This object indicates the value of sysUpTime the last time the device made a change to the cfmConditionTable.