A conceptual row in cmplsTunnelAutoBWTable. There is an entry
in this table for each MPLS-TE tunnel with mplsTunnelRole
equals to 'head' or 'headTail'.
Parsed from file CISCO-MPLS-TE-STD-EXT-MIB.mib
Module: CISCO-MPLS-TE-STD-EXT-MIB
A conceptual row in cmplsTunnelAutoBWTable. There is an entry
in this table for each MPLS-TE tunnel with mplsTunnelRole
equals to 'head' or 'headTail'.
A conceptual row in cmplsTunnelAutoBWTable. There is an entry
in this table for each MPLS-TE tunnel with mplsTunnelRole
equals to 'head' or 'headTail'.
Parsed from file CISCO-MPLS-TE-STD-EXT-MIB.my.txt
Company: None
Module: CISCO-MPLS-TE-STD-EXT-MIB
A conceptual row in cmplsTunnelAutoBWTable. There is an entry
in this table for each MPLS-TE tunnel with mplsTunnelRole
equals to 'head' or 'headTail'.
cmplsTunnelAutoBWEntry OBJECT-TYPE SYNTAX CmplsTunnelAutoBWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cmplsTunnelAutoBWTable. There is an entry in this table for each MPLS-TE tunnel with mplsTunnelRole equals to 'head' or 'headTail'." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { cmplsTunnelAutoBWTable 1 }
cmplsTunnelAutoBWEntry OBJECT-TYPE SYNTAX CmplsTunnelAutoBWEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A conceptual row in cmplsTunnelAutoBWTable. There is an entry in this table for each MPLS-TE tunnel with mplsTunnelRole equals to 'head' or 'headTail'." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { cmplsTunnelAutoBWTable 1 }
Vendor: Cisco
Module: CISCO-MPLS-TE-STD-EXT-MIB
[Automatically extracted from oidview.com]
cmplsTunnelAutoBWEntry OBJECT-TYPE SYNTAX CmplsTunnelAutoBWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cmplsTunnelAutoBWTable. There is an entry in this table for each MPLS-TE tunnel with mplsTunnelRole equals to 'head' or 'headTail'." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { cmplsTunnelAutoBWTable 1 }
cmplsTunnelAutoBWEntry OBJECT-TYPE SYNTAX CmplsTunnelAutoBWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cmplsTunnelAutoBWTable. There is an entry in this table for each MPLS-TE tunnel with mplsTunnelRole equals to 'head' or 'headTail'." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { cmplsTunnelAutoBWTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.738.1.1.1.1 | cmplsTunnelAutoBWStatus | 0 | 0 | This object indicates the operational status [or mode] of the auto bandwidth algorithm: - autoBWDisabled: The auto-bandwidth algo… |
1.3.6.1.4.1.9.9.738.1.1.1.2 | cmplsTunnelAutoBWMin | 0 | 0 | This object specifies the minimum bandwidth that the auto-bandwidth algorithm can apply to a tunnel when the adjustment threshold… |
1.3.6.1.4.1.9.9.738.1.1.1.3 | cmplsTunnelAutoBWMax | 0 | 0 | This object specifies the maximum bandwidth that the auto-bandwidth algorithm can apply to a tunnel when the adjustment threshold… |
1.3.6.1.4.1.9.9.738.1.1.1.4 | cmplsTunnelAutoBWAdjThreshPercs | 0 | 0 | This object specifies the adjustment threshold percentage that needs to be overcome in order to trigger a new bandwidth applicati… |
1.3.6.1.4.1.9.9.738.1.1.1.5 | cmplsTunnelAutoBWAdjThreshBW | 0 | 0 | This object specifies the adjustment threshold bandwidth that needs to be overcome in order to trigger a new bandwidth applicatio… |
1.3.6.1.4.1.9.9.738.1.1.1.6 | cmplsTunnelAutoBWOverflowThreshPercs | 0 | 0 | This object specifies the adjustment threshold percentage that needs to be overcome in order to trigger an overflow occurrence. I… |
1.3.6.1.4.1.9.9.738.1.1.1.7 | cmplsTunnelAutoBWOverflowThreshBW | 0 | 0 | This object specifies the adjustment threshold bandwidth that needs to be overcome in order to trigger an overflow occurrence. If… |
1.3.6.1.4.1.9.9.738.1.1.1.8 | cmplsTunnelAutoBWOverflowLimit | 0 | 0 | This object specifies the number of consecutive collections exceeding overflow threshold. If the application period has not compl… |
1.3.6.1.4.1.9.9.738.1.1.1.9 | cmplsTunnelAutoBWUnderflowThreshPercs | 0 | 0 | This object specifies the adjustment threshold percentage that needs to be overcome in order to trigger an underflow occurrence. I… |
1.3.6.1.4.1.9.9.738.1.1.1.10 | cmplsTunnelAutoBWUnderflowThreshBW | 0 | 0 | This object specifies the adjustment threshold bandwidth that needs to be overcome in order to trigger an underflow occurrence. If… |
1.3.6.1.4.1.9.9.738.1.1.1.11 | cmplsTunnelAutoBWUnderflowLimit | 0 | 0 | This object specifies the number of consecutive collections under the underflow threshold. If the application period has not comp… |
1.3.6.1.4.1.9.9.738.1.1.1.12 | cmplsTunnelAutoBWApplicationFrequency | 0 | 0 | This object specifies the bandwidth application period. This object value is not aplicable if cmplsTunnelAutoBWStatus is 'autoBWD… |
1.3.6.1.4.1.9.9.738.1.1.1.13 | cmplsTunnelAutoBWCollectionFrequency | 0 | 0 | This object specifies the sampling period for data rates. This object value is not aplicable if cmplsTunnelAutoBWStatus is 'autoB… |
1.3.6.1.4.1.9.9.738.1.1.1.14 | cmplsTunnelAutoBWLastAppliedBW | 0 | 0 | This object indicates the last bandwidth applied by the auto-bandwidth algorithm. It will be set to zero if no bandwidth has been… |
1.3.6.1.4.1.9.9.738.1.1.1.15 | cmplsTunnelAutoBWApplications | 0 | 0 | This object indicates the number of auto bandwidths applied. If mplsTunnelInstance is zero this object will be set to zero. This … |
1.3.6.1.4.1.9.9.738.1.1.1.16 | cmplsTunnelAutoBWLastApplicationTrigger | 0 | 0 | This object indicates the trigger reason for the last bandwidth application. If mplsTunnelInstance is zero this object will be se… |
1.3.6.1.4.1.9.9.738.1.1.1.17 | cmplsTunnelAutoBWOverflowApplications | 0 | 0 | This object indicates the number of bandwidth applications due to overflow occurrences. If mplsTunnelInstance is zero this object… |
1.3.6.1.4.1.9.9.738.1.1.1.18 | cmplsTunnelAutoBWOverflowOccurrences | 0 | 0 | This object indicates the number of overflow occurrences since last application period. If mplsTunnelInstance is zero this object… |
1.3.6.1.4.1.9.9.738.1.1.1.19 | cmplsTunnelAutoBWUnderflowApplications | 0 | 0 | This object indicates the number of bandwidth applications due to underflow occurrences. If mplsTunnelInstance is zero this objec… |
1.3.6.1.4.1.9.9.738.1.1.1.20 | cmplsTunnelAutoBWUnderflowOccurrences | 0 | 0 | This object indicates the number of underflow occurrences since last application period. If mplsTunnelInstance is zero this objec… |
1.3.6.1.4.1.9.9.738.1.1.1.21 | cmplsTunnelAutoBWUnderflowHighestBW | 0 | 0 | This object indicates the highest sample collected during an underflow sequence. If mplsTunnelInstance is zero this object will b… |
1.3.6.1.4.1.9.9.738.1.1.1.22 | cmplsTunnelAutoBWRequested | 0 | 0 | This object indicates the bandwidth requested by the auto-bandwidth algorithm. If mplsTunnelInstance is zero this object will be … |
1.3.6.1.4.1.9.9.738.1.1.1.23 | cmplsTunnelAutoBWSignaled | 0 | 0 | This object indicates the bandwidth signaled by the auto-bandwidth algorithm. If mplsTunnelInstance is zero this object will be s… |
1.3.6.1.4.1.9.9.738.1.1.1.24 | cmplsTunnelAutoBWCollectOnlyRequested | 0 | 0 | This object indicates the bandwidth that would have been requested by the auto-bandwidth algorithm if the auto-bandwidth function… |
1.3.6.1.4.1.9.9.738.1.1.1.25 | cmplsTunnelAutoBWHighest | 0 | 0 | This object indicates the highest bandwidth sampled by the auto-bandwidth algorithm. If mplsTunnelInstance is zero this object wi… |
1.3.6.1.4.1.9.9.738.1.1.1.26 | cmplsTunnelAutoBWCollectedSamples | 0 | 0 | This object indicates the samples collected since the last auto-bandwidth application. If mplsTunnelInstance is zero this object … |
1.3.6.1.4.1.9.9.738.1.1.1.27 | cmplsTunnelAutoBWJitter | 0 | 0 | This object indicates the auto-bandwidth application jitter. Jitter is the extra time to be added to the application interval the… |
1.3.6.1.4.1.9.9.738.1.1.1.28 | cmplsTunnelAutoBWAppRejectReason | 0 | 0 | This object indicates the reason for the bandwidth application rejection. This object value is not aplicable if cmplsTunnelAutoBW… |