Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entry's criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices.
Parsed from file CISCO-ATM-SIG-DIAG-MIB.mib
Module: CISCO-ATM-SIG-DIAG-MIB
Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entry's criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices.
csfFilterEntry OBJECT-TYPE
SYNTAX CsfFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entrys criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices."
INDEX { csfFilterIndex }
View at oid-info.com
Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entry's criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices.
Parsed from file CISCO-ATM-SIG-DIAG-MIB.my.txt
Company: None
Module: CISCO-ATM-SIG-DIAG-MIB
Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM device. Only connection setup
failures which match against all of the entry's criteria are
recorded in the csfRecordTable. A new entry can be created by
specifying a csfFilterIndex value that is currently not being
used and also using an appropriate value (createAndGo or
createAndWait) for the csfFilterRowStatus object. If a particular
call failure matches multiple entries in the csfRecordTable then
multiple entries will be created in the csfRecordTable for each
of the matched entries in the csfFilterTable . An entry in the
csfFilterTable could also be created via the command line
interface, available on the ATM devices.
csfFilterEntry OBJECT-TYPE SYNTAX CsfFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all connection setup failures generated/detected at this ATM device. Only connection setup failures which match against all of the entry's criteria are recorded in the csfRecordTable. A new entry can be created by specifying a csfFilterIndex value that is currently not being used and also using an appropriate value (createAndGo or createAndWait) for the csfFilterRowStatus object. If a particular call failure matches multiple entries in the csfRecordTable then multiple entries will be created in the csfRecordTable for each of the matched entries in the csfFilterTable . An entry in the csfFilterTable could also be created via the command line interface, available on the ATM devices." INDEX { csfFilterIndex } ::= { csfFilterTable 1 }
csfFilterEntry OBJECT-TYPE SYNTAX CsfFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all connection setup failures generated/detected at this ATM device. Only connection setup failures which match against all of the entry's criteria are recorded in the csfRecordTable. A new entry can be created by specifying a csfFilterIndex value that is currently not being used and also using an appropriate value (createAndGo or createAndWait) for the csfFilterRowStatus object. If a particular call failure matches multiple entries in the csfRecordTable then multiple entries will be created in the csfRecordTable for each of the matched entries in the csfFilterTable . An entry in the csfFilterTable could also be created via the command line interface, available on the ATM devices." INDEX { csfFilterIndex } ::= { csfFilterTable 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
csfFilterEntry OBJECT-TYPE SYNTAX CsfFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all connection setup failures generated/detected at this ATM device. Only connection setup failures which match against all of the entry's criteria are recorded in the csfRecordTable. A new entry can be created by specifying a csfFilterIndex value that is currently not being used and also using an appropriate value (createAndGo or createAndWait) for the csfFilterRowStatus object. If a particular call failure matches multiple entries in the csfRecordTable then multiple entries will be created in the csfRecordTable for each of the matched entries in the csfFilterTable . An entry in the csfFilterTable could also be created via the command line interface, available on the ATM devices." INDEX { csfFilterIndex } ::= { csfFilterTable 1 }
csfFilterEntry OBJECT-TYPE SYNTAX CsfFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all connection setup failures generated/detected at this ATM device. Only connection setup failures which match against all of the entry's criteria are recorded in the csfRecordTable. A new entry can be created by specifying a csfFilterIndex value that is currently not being used and also using an appropriate value (createAndGo or createAndWait) for the csfFilterRowStatus object. If a particular call failure matches multiple entries in the csfRecordTable then multiple entries will be created in the csfRecordTable for each of the matched entries in the csfFilterTable . An entry in the csfFilterTable could also be created via the command line interface, available on the ATM devices." INDEX { csfFilterIndex } ::= { csfFilterTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.78.1.2.1.1.1 | csfFilterIndex | 0 | 0 | An arbitrary integer uniquely identifying a filtering criteria. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.2 | csfFilterScope | 0 | 0 | This object restricts the scope of the filter to calls which where rejected either within the system in which the filtering is i… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.3 | csfFilterConnKind | 0 | 0 | This object enables the user to track failures of soft permanent virtual channel connections, soft permanent virtual path connect… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.4 | csfFilterConnCastType | 0 | 0 | This object restricts the scope of the filter based on the type of topology of connections (point-to-point or point-to-multipoint… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.5 | csfFilterServiceCategory | 0 | 0 | This object restricts the scope of the filter to calls belonging to service categories represented by this object. |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.6 | csfFilterInInterface | 0 | 0 | This object restricts the scope of the filter to calls which entered the ATM device through the port represented by this object I… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.7 | csfFilterOutInterface | 0 | 0 | This object restricts the scope of the filter to calls which exited the ATM device through the port represented by this object It… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.8 | csfFilterCause | 0 | 0 | This object restricts the scope of the filter to calls which were cleared with the cause code represented by this object. The va… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.9 | csfFilterCallingParty | 0 | 0 | The combination of this object and the corresponding instance of csfFilterCallingPartyMask is one selection criteria for this rec… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.10 | csfFilterCallingPartyMask | 0 | 0 | The combination of this object and the corresponding instance of csfFilterCallingParty is one selection criteria for this record.… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.11 | csfFilterCalledParty | 0 | 0 | The combination of this object and the corresponding instance of csfFilterCalledPartyMask is one selection criteria for this reco… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.12 | csfFilterCalledPartyMask | 0 | 0 | The combination of this object and the corresponding instance of csfFilterCalledParty is one selection criteria for this record. … |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.13 | csfFilterMaxRecords | 0 | 0 | The maximum number of entries that are desired in the csfRecordTable on behalf of this entry. The agent will not create more than… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.14 | csfFilterAgeTimeout | 0 | 0 | The number of seconds left for this entry to age out. On expiry of this timer filtering is disabled for this entry. The display r… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.15 | csfFilterPurge | 0 | 0 | The object provides a facility for the user to purge the records in the csfRecordTable corresponding to this entry. When the valu… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.16 | csfFilterNumMatches | 0 | 0 | A monotonically increasing counter to keep track of the number of call failures that matched this entry for the entire lifetime o… |
| 1.3.6.1.4.1.9.9.78.1.2.1.1.17 | csfFilterRowStatus | 0 | 0 | Indicates the status of this row. Used according to the row installation and removal conventions. This object can be used to temp… |