This object specifies the length of the IPv6 prefix specified
by the corresponding instance of cdtIpv6NdPrefix.
This column is valid only if the 'ipv6NdPrefix' bit of the
corresponding instance of cdtIfValid is '1'.
This object specifies the length of the IPv6 prefix specified
by the corresponding instance of cdtIpv6NdPrefix.
This column is valid only if the 'ipv6NdPrefix' bit of the
corresponding instance of cdtIfValid is '1'.
cdtIfIpv6NdPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the length of the IPv6 prefix specified by the corresponding instance of cdtIpv6NdPrefix. This column is valid only if the 'ipv6NdPrefix' bit of the corresponding instance of cdtIfValid is '1'." REFERENCE "T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor Discovery for IP version 6 (IPv6)', RFC-4861, September 2007." DEFVAL { 0 } ::= { cdtIfTemplateEntry 19 }
cdtIfIpv6NdPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the length of the IPv6 prefix specified by the corresponding instance of cdtIpv6NdPrefix. This column is valid only if the 'ipv6NdPrefix' bit of the corresponding instance of cdtIfValid is '1'." REFERENCE "T. Narten, E. Nordmark, W. Simpson, H. Soliman, 'Neighbor Discovery for IP version 6 (IPv6)', RFC-4861, September 2007." DEFVAL { 0 } ::= { cdtIfTemplateEntry 19 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.784.1.2.1.1.1 | cdtIfValid | 0 | 0 | This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string … |
1.3.6.1.4.1.9.9.784.1.2.1.1.2 | cdtIfMtu | 0 | 0 | This object specifies the Maximum Transfer Unit (MTU) size for all packets sent on the target interface. The value '0' cannot be … |
1.3.6.1.4.1.9.9.784.1.2.1.1.3 | cdtIfCdpEnable | 0 | 0 | This object specifies whether the target interface participates in the Cisco Discovery Protocol (CDP). This column is valid only … |
1.3.6.1.4.1.9.9.784.1.2.1.1.4 | cdtIfFlowMonitor | 0 | 0 | This object specifies the name of the flow monitor associated with the target interface. This column is valid only if the 'flowMo… |
1.3.6.1.4.1.9.9.784.1.2.1.1.5 | cdtIfIpv4Unnumbered | 0 | 0 | This object specifies the interface of the source address that the target interface uses when originating IPv4 packets. The value… |
1.3.6.1.4.1.9.9.784.1.2.1.1.6 | cdtIfIpv4SubEnable | 0 | 0 | This object specifies whether the target interface allows IPv4 subscriber sessions. This column is valid only if the 'ipv4SubEnab… |
1.3.6.1.4.1.9.9.784.1.2.1.1.7 | cdtIfIpv4Mtu | 0 | 0 | This object specifies the Maximum Transfer Unit (MTU) size for IPv4 packets sent on the target interface. The value '0' cannot be… |
1.3.6.1.4.1.9.9.784.1.2.1.1.8 | cdtIfIpv4TcpMssAdjust | 0 | 0 | This object specifies the adjustment to the Maximum Segment Size (MSS) of TCP SYN packets received by the target interface contai… |
1.3.6.1.4.1.9.9.784.1.2.1.1.9 | cdtIfIpv4VerifyUniRpf | 0 | 0 | This object specifies whether the type of unicast RPF the system performs on IPv4 packets received by the target interface. This c… |
1.3.6.1.4.1.9.9.784.1.2.1.1.10 | cdtIfIpv4VerifyUniRpfAcl | 0 | 0 | This object specifies the name (or number) of the IPv4 ACL used to determine whether the system should permit/deny packets receiv… |
1.3.6.1.4.1.9.9.784.1.2.1.1.11 | cdtIfIpv4VerifyUniRpfOpts | 0 | 0 | This object specifies the options that affect how the system performs unicast RPF on IPv4 packets received by the target interfac… |
1.3.6.1.4.1.9.9.784.1.2.1.1.12 | cdtIfIpv6Enable | 0 | 0 | This object specifies whether the system processes IPv6 packets received by the target interface. This column is valid only if th… |
1.3.6.1.4.1.9.9.784.1.2.1.1.13 | cdtIfIpv6SubEnable | 0 | 0 | This object specifies whether the target interface allows IPv6 subscriber sessions. This column is valid only if the 'ipv6SubEnab… |
1.3.6.1.4.1.9.9.784.1.2.1.1.14 | cdtIfIpv6TcpMssAdjust | 0 | 0 | This object specifies the adjustment to the Maximum Segment Size (MSS) of TCP SYN packets received by the target interface contai… |
1.3.6.1.4.1.9.9.784.1.2.1.1.15 | cdtIfIpv6VerifyUniRpf | 0 | 0 | This object specifies whether the type of unicast RPF the system performs on IPv6 packets received by the target interface. This c… |
1.3.6.1.4.1.9.9.784.1.2.1.1.16 | cdtIfIpv6VerifyUniRpfAcl | 0 | 0 | This object specifies the name (or number) of the IPv6 ACL used to determine whether the system should permit/deny packets receiv… |
1.3.6.1.4.1.9.9.784.1.2.1.1.17 | cdtIfIpv6VerifyUniRpfOpts | 0 | 0 | This object specifies the options that affect how the system performs unicast RPF on IPv6 packets received by the target interfac… |
1.3.6.1.4.1.9.9.784.1.2.1.1.18 | cdtIfIpv6NdPrefix | 0 | 0 | This object specifies the IPv6 network number included in IPv6 router advertisements sent on the target interface. This column is… |
1.3.6.1.4.1.9.9.784.1.2.1.1.20 | cdtIfIpv6NdValidLife | 0 | 0 | This object specifies the interval that the system advertises the IPv6 prefix (i.e., the corresponding instance of cdtIfIpv6NdPre… |
1.3.6.1.4.1.9.9.784.1.2.1.1.21 | cdtIfIpv6NdPreferredLife | 0 | 0 | This object specifies the interval that the system advertises the IPv6 prefix (i.e., the corresponding instance of cdtIfIpv6NdPre… |
1.3.6.1.4.1.9.9.784.1.2.1.1.22 | cdtIfIpv6NdOpts | 0 | 0 | This object specifies options that affect advertisements sent on the target interface: 'advertise' This option specifies that the … |
1.3.6.1.4.1.9.9.784.1.2.1.1.23 | cdtIfIpv6NdDadAttempts | 0 | 0 | This object specifies the number of consecutive neighbor solitication messages the system sends on the target interface while per… |
1.3.6.1.4.1.9.9.784.1.2.1.1.24 | cdtIfIpv6NdNsInterval | 0 | 0 | This object specifies the interval between neighbor solicitation retransmissions on the target interface. This column is valid on… |
1.3.6.1.4.1.9.9.784.1.2.1.1.25 | cdtIfIpv6NdReachableTime | 0 | 0 | This object specifies the amount of time the system considers a neighbor of the target interface reachable after a reachability c… |
1.3.6.1.4.1.9.9.784.1.2.1.1.26 | cdtIfIpv6NdRaIntervalUnits | 0 | 0 | This object specifies the units of time for the corresponding instances of cdtIfIpv6NdRaIntervalMin and cdtIfIpv6NdRaIntervalMax.… |
1.3.6.1.4.1.9.9.784.1.2.1.1.27 | cdtIfIpv6NdRaIntervalMax | 0 | 0 | This object specifies the maximum interval between IPv6 router advertisements sent on the target interface. The value '0' cannot … |
1.3.6.1.4.1.9.9.784.1.2.1.1.28 | cdtIfIpv6NdRaIntervalMin | 0 | 0 | This object specifies the minimum interval between IPv6 router advertisements sent on the target interface. The value of this co… |
1.3.6.1.4.1.9.9.784.1.2.1.1.29 | cdtIfIpv6NdRaLife | 0 | 0 | This object specifies the router lifetime value in IPv6 router advertisements sent on the target interface. The value '0' specif… |
1.3.6.1.4.1.9.9.784.1.2.1.1.30 | cdtIfIpv6NdRouterPreference | 0 | 0 | This object specifies the Default Router Preference (DRP) for the router on the target interface. This column is valid only if th… |