This entry defines path specifier that can be used in
mediatrace session.
Each entry is uniquely identified by name specified
by cMTPathSpecifierName object. A row created in this
table will be shown in 'show running' command and it will
not be saved into non-volatile memory.
This entry defines path specifier that can be used in
mediatrace session.
Each entry is uniquely identified by name specified
by cMTPathSpecifierName object. A row created in this
table will be shown in 'show running' command and it will
not be saved into non-volatile memory.
cMTPathSpecifierEntry OBJECT-TYPE SYNTAX CMTPathSpecifierEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry defines path specifier that can be used in mediatrace session. Each entry is uniquely identified by name specified by cMTPathSpecifierName object. A row created in this table will be shown in 'show running' command and it will not be saved into non-volatile memory." INDEX { cMTPathSpecifierName } ::= { cMTPathSpecifierTable 1 }
cMTPathSpecifierEntry OBJECT-TYPE SYNTAX CMTPathSpecifierEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry defines path specifier that can be used in mediatrace session. Each entry is uniquely identified by name specified by cMTPathSpecifierName object. A row created in this table will be shown in 'show running' command and it will not be saved into non-volatile memory." INDEX { cMTPathSpecifierName } ::= { cMTPathSpecifierTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.800.1.1.19.1.1 | cMTPathSpecifierName | 0 | 0 | A unique identifier for the path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.2 | cMTPathSpecifierRowStatus | 0 | 0 | This object specifies the status of the path specifier. Only CreateAndGo and active status is supported. The following columns m… |
1.3.6.1.4.1.9.9.800.1.1.19.1.3 | cMTPathSpecifierMetadataGlobalId | 0 | 0 | Metadata global session id can be used as path specifier. This object should be populated when this is desired. Mediatrace softwa… |
1.3.6.1.4.1.9.9.800.1.1.19.1.4 | cMTPathSpecifierDestAddrType | 0 | 0 | This object specifies the type of IP address specified by the corresponding instance of cMTPathSpecifierDestAddr. |
1.3.6.1.4.1.9.9.800.1.1.19.1.5 | cMTPathSpecifierDestAddr | 0 | 0 | This object specifies the destination address for the path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.6 | cMTPathSpecifierDestPort | 0 | 0 | This object specifies the destination port for the path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.7 | cMTPathSpecifierSourceAddrType | 0 | 0 | This object specifies the type of IP address specified by the corresponding instance of cMTFlowSpecifierSourceAddr. |
1.3.6.1.4.1.9.9.800.1.1.19.1.8 | cMTPathSpecifierSourceAddr | 0 | 0 | This object specifies the source address for the path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.9 | cMTPathSpecifierSourcePort | 0 | 0 | This object specifies the source port for the path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.10 | cMTPathSpecifierProtocolForDiscovery | 0 | 0 | This object specifies the protocol used for path discovery on Mediatrace. Currently, only RSVP is used by default. |
1.3.6.1.4.1.9.9.800.1.1.19.1.11 | cMTPathSpecifierGatewayAddrType | 0 | 0 | This object specifies the type of IP address specified by the corresponding instance of cMTPathSpecifierGatewayAddr. |
1.3.6.1.4.1.9.9.800.1.1.19.1.12 | cMTPathSpecifierGatewayAddr | 0 | 0 | When the mediatrace session is originated on layer-2 switch the address of gateway is required to establish the session. This obj… |
1.3.6.1.4.1.9.9.800.1.1.19.1.13 | cMTPathSpecifierGatewayVlanId | 0 | 0 | This object specifies the Vlan ID associated with the gateway for path specifier. |
1.3.6.1.4.1.9.9.800.1.1.19.1.14 | cMTPathSpecifierIpProtocol | 0 | 0 | This object specifies which metrics are monitored for a path specifier. Currently, only TCP and UDP are supported. |