This object defines the operation to be performed to the layer
destination port field. Source port fields are present only for
IGMP, ICMP, SCTP, TCP, and UDP protocols.
If caAclIPV6ACLProtocol is none of the ones listed above, this
field should set to noOperator(1), which means no comparison
is to be performed.
If this field is set to range(5) then two port numbers are
necessary. I.e., Both caAclIPV6ACLDestinationPort and
caAclIPV6ACLDestinationPortUpper need to be provided.
This object defines the operation to be performed to the layer
destination port field. Source port fields are present only for
IGMP, ICMP, SCTP, TCP, and UDP protocols.
If caAclIPV6ACLProtocol is none of the ones listed above, this
field should set to noOperator(1), which means no comparison
is to be performed.
If this field is set to range(5) then two port numbers are
necessary. I.e., Both caAclIPV6ACLDestinationPort and
caAclIPV6ACLDestinationPortUpper need to be provided.
caAclIPV6ACEDestinationPortOperator OBJECT-TYPE SYNTAX CaAclPortOperator ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the operation to be performed to the layer destination port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. If caAclIPV6ACLProtocol is none of the ones listed above, this field should set to noOperator(1), which means no comparison is to be performed. If this field is set to range(5) then two port numbers are necessary. I.e., Both caAclIPV6ACLDestinationPort and caAclIPV6ACLDestinationPortUpper need to be provided." ::= { caAclIPV6ACECfgTableEntry 14 }
caAclIPV6ACEDestinationPortOperator OBJECT-TYPE SYNTAX CaAclPortOperator MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the operation to be performed to the layer destination port field. Source port fields are present only for IGMP, ICMP, SCTP, TCP, and UDP protocols. If caAclIPV6ACLProtocol is none of the ones listed above, this field should set to noOperator(1), which means no comparison is to be performed. If this field is set to range(5) then two port numbers are necessary. I.e., Both caAclIPV6ACLDestinationPort and caAclIPV6ACLDestinationPortUpper need to be provided." ::= { caAclIPV6ACECfgTableEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.808.1.1.3.1.1 | caAclIPV6ACESequenceNumber | 0 | 0 | This object uniquely identifies an ACE within an ACL. Sequence numbers are assigned to each permit/deny statement, causing the sy… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.2 | caAclIPV6ACEAction | 0 | 0 | This object indicates the type of action to be taken if the packet matches the given criteria. If it is set to permit(1), all pac… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.3 | caAclIPV6ACEProtocol | 0 | 0 | This object identifies the protocol type to be filtered by the ACE. Protocol numbers are defined in the Network Working Group Req… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.4 | caAclIPV6ACESourceAddress | 0 | 0 | This object determines the address of the network or host from which the packet is being sent. If this object value is 0::0 and t… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.5 | caAclIPV6ACESourcePrefixLength | 0 | 0 | This object determines the number of bits in the field caAclIPV6ACLSourceAddress to be checked. If the value of this object is 0,… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.6 | caAclIPV6ACESourceNetworkGroup | 0 | 0 | This object defines the Source Network Object Group from which the packet is being sent. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.7 | caAclIPV6ACESourcePortOperator | 0 | 0 | This object defines the operation to be performed to the layer source port field. Source port fields are present only for IGMP, I… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.8 | caAclIPV6ACESourcePort | 0 | 0 | This object defines the source port number of the layer 4 protocol. This is the field to be matched with the specified source por… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.9 | caAclIPV6ACESourcePortUpper | 0 | 0 | This object defines the inclusive upper bound of the layer 4 source port range that is to be matched. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.10 | caAclIPV6ACESourcePortGroup | 0 | 0 | This object defines the Source Port Object Group from which the packet is being sent. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.11 | caAclIPV6ACEDestinationAddress | 0 | 0 | This object determines the address of the network or host to which the packet is being sent. If this object value is 0::0 and the… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.12 | caAclIPV6ACEDestinationPrefixLength | 0 | 0 | This object determines the number of bits in the field caAclIPV6ACLDestinationAddress to be checked. If the value of this object … |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.13 | caAclIPV6ACEDestinationNetworkGroup | 0 | 0 | This object defines the Source Network Object Group to which the packet is being sent. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.15 | caAclIPV6ACEDestinationPort | 0 | 0 | This object defines the destination port number of the layer 4 protocol. This is the field to be matched with the specified desti… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.16 | caAclIPV6ACEDestinationPortUpper | 0 | 0 | This object defines the inclusive upper bound of the layer 4 destination port range that is to be matched. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.17 | caAclIPV6ACEDestinationPortGroup | 0 | 0 | This object defines the Source Port Object Group to which the packet is being sent. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.18 | caAclIPV6ACETrafficClassValue | 0 | 0 | This object defines the traffic class value that will be considered in the match criteria against the value in the packet. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.19 | caAclIPV6ACETcpFlagsValue | 0 | 0 | This object defines the value of the TCP flags which will be considered in the match criteria based on caAclIPV6ACLTcpFlagsMatchT… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.20 | caAclIPV6ACETcpFlagsMask | 0 | 0 | This object defines the mask value of the TCP flags field. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.21 | caAclIPV6ACETcpFlagsMatchType | 0 | 0 | This object defines the type of matching to be done on the TCP flags field. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.22 | caAclIPV6ACELogOption | 0 | 0 | This object defines the value of the log option field to be applied to packets that match this ACE entry. |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.23 | caAclIPV6ACECounterLabel | 0 | 0 | This object defines the counter label name for this ACE. ACEs that share the same counter label name will have their hit counts a… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.24 | caAclIPV6ACERemark | 0 | 0 | This object defines a comment in the ACL. It helps the user to define some meaningful comment to identify the ACE quickly, or to… |
| 1.3.6.1.4.1.9.9.808.1.1.3.1.25 | caAclIPV6ACERowStatus | 0 | 0 | This object is used to create, modify, or delete an entry in the caAclIPV6ACLTable. A row can be created using the 'CreateAndGo' … |