This object indicates the number of packets in the in to out
direction not translated because source address was out of
configured prefix or range. For NAT44 configured in predefined
mode, NAT64 stateful or DS Lite, it could be drops due to
source IP address not matching the configured prefix bits.
cNatCgnCounterSourceIPOutOfRangeDrops OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of packets in the in to out direction not translated because source address was out of configured prefix or range. For NAT44 configured in predefined mode, NAT64 stateful or DS Lite, it could be drops due to source IP address not matching the configured prefix bits." ::= { cNatCgnCounterEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.818.1.2.1.1.1 | cNatCgnCounterSessionCreations | 0 | 0 | This object indicates the number of sessions created since the instance is up. |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.2 | cNatCgnCounterSessionRemovals | 0 | 0 | This object indicates the number of sessions removed since the instance is up. The number of active sessions is equal to cNatCgnC… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.3 | cNatCgnCounterOutOfSessionDrops | 0 | 0 | This object indicates the number of packets dropped because they required a new session entry to be created, however, there is no… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.4 | cNatCgnCounterSessionLimitDrops | 0 | 0 | This object indicates the number of packets in either in to out or out to in direction dropped because of exceeding limit on sess… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.5 | cNatCgnCounterNoMappingEntryDrops | 0 | 0 | This object indicates the number of packets in the out to in direction not translated because there was no mapping found. |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.7 | cNatCgnCounterEndPointFilteringDrops | 0 | 0 | This object indicates the number of packets in the out to in direction dropped because of end point dependent filtering policy. N… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.8 | cNatCgnCounterTCPSequenceDrops | 0 | 0 | This object indicates the number of packets in the out to in direction dropped because TCP sequence check failed. |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.9 | cNatCgnCounterTCPMappingDrops | 0 | 0 | This object indicates the number of TCP packets in the in to out direction dropped because a new mapping was required to be creat… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.10 | cNatCgnCounterFragmentPktsInToOutDrops | 0 | 0 | This object indicates the number of fragmented packets in the in to out direction dropped due to errors such as timed out waiting… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.11 | cNatCgnCounterFragmentPktsOutToInDrops | 0 | 0 | This object indicates the number of fragmented packets in the out to in direction dropped due to errors such as timed out waiting… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.12 | cNatCgnCounterCurrentPortAllocation | 0 | 0 | This object indicates the current average port allocation across all available public IP addresses applied to this NAT instance. W… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.13 | cNatCgnCounterPortUsageLowThreshold | 0 | 0 | This object specifies the low threshold in percentage of available public ports that are used up. The notification cNatCgnNotifPo… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.14 | cNatCgnCounterPortUsageClearLowThreshold | 0 | 0 | This object specifies the clear low threshold in percentage of available public ports that are used up. The notification cNatCgnN… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.15 | cNatCgnCounterPortUsageHighThreshold | 0 | 0 | This object specifies the high threshold in percentage of available public ports that are used up. The notification cNatCgnNotifP… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.16 | cNatCgnCounterPortUsageClearHighThreshold | 0 | 0 | This object specifies the clear high threshold in percentage of available public ports that are used up. The notification cNatCgn… |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.17 | cNatCgnCounterAverageBulkPortUsage | 0 | 0 | This object indicates the average percentage usage of ports pre-allocated in bulk. This value is valid only if the bulk allocatio… |