Indicate the operational spanning tree path cost mode
on device. This mode applies to all instances of the Spanning
Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is long(2),
the stpxLongStpPortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32 bits value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of stpxLongStpPortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.
Parsed from file CISCO-STP-EXTENSIONS-MIB.mib
Module: CISCO-STP-EXTENSIONS-MIB
Indicate the operational spanning tree path cost mode
on device. This mode applies to all instances of the Spanning
Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is long(2),
the stpxLongStpPortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32 bits value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of stpxLongStpPortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.
Indicate the operational spanning tree path cost mode
on device. This mode applies to all instances of the Spanning
Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is long(2),
the stpxLongStpPortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32 bits value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of stpxLongStpPortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.
Parsed from file cisco-stp-extensions.mib.txt
Company: None
Module: CISCO-STP-EXTENSIONS-MIB
Indicate the operational spanning tree path cost mode
on device. This mode applies to all instances of the Spanning
Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is long(2),
the stpxLongStpPortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32 bits value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of stpxLongStpPortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.
stpxSpanningTreePathCostOperMode OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535. When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used." ::= { stpxSpanningTreeObjects 7 }
stpxSpanningTreePathCostOperMode OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535. When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used." ::= { stpxSpanningTreeObjects 7 }
Vendor: Cisco
Module: CISCO-STP-EXTENSIONS-MIB
[Automatically extracted from oidview.com]
stpxSpanningTreePathCostOperMode OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535. When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used." ::= { stpxSpanningTreeObjects 7 }
stpxSpanningTreePathCostOperMode OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535. When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used." ::= { stpxSpanningTreeObjects 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.82.1.6.7.0 | stpxSpanningTreePathCostOperMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.82.1.6.1 | stpxSpanningTreeType | 1 | 1 | The actual mode of spanning tree protocol runs on the device. It can be one of the following: pvstPlus mistp mistpPvstPlus enabled … |
1.3.6.1.4.1.9.9.82.1.6.2 | stpxSpanningTreePathCostMode | 1 | 1 | Indicates the administrative spanning tree path cost mode configured on device. |
1.3.6.1.4.1.9.9.82.1.6.3 | stpxLongStpPortPathCostTable | 1 | 2 | A table containing the spanning tree port path cost configuration when stpxSpanningTreePathCostOperMode is long(2). If the value o… |
1.3.6.1.4.1.9.9.82.1.6.4 | stpxExtendedSysIDAdminEnabled | 1 | 1 | Indicates whether Extended System ID feature is administratively enabled on the device or not. |
1.3.6.1.4.1.9.9.82.1.6.5 | stpxExtendedSysIDOperEnabled | 1 | 1 | Indicates whether Extended System ID feature is operationaly enabled on the device or not. If the value of this object is true(1)… |
1.3.6.1.4.1.9.9.82.1.6.6 | stpxNotificationEnable | 1 | 1 | Indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the spec… |