Reference record for OID 1.3.6.1.4.1.9.9.82.1.8.1.1.2

parent

1.3.6.1.4.1.9.9.82.1.8.1.1 (stpxLoopGuardConfigEntry)

node code

2

node name

stpxLoopGuardConfigEnabled

dot oid

1.3.6.1.4.1.9.9.82.1.8.1.1.2

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoStpExtensionsMIB(82) stpxObjects(1) stpxLoopGuardObjects(8) stpxLoopGuardConfigTable(1) stpxLoopGuardConfigEntry(1) stpxLoopGuardConfigEnabled(2)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoStpExtensionsMIB/stpxObjects/stpxLoopGuardObjects/stpxLoopGuardConfigTable/stpxLoopGuardConfigEntry/stpxLoopGuardConfigEnabled

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/82/1/8/1/1/2

Description by circitor

An indication of whether the LoopGuard capability is
enabled on this port or not. This configuration will be
applied to all the Spanning Tree instances in which this
port exists.

In order to support additional Loop Guard config mode
(default) as defined in stpxLoopGuardConfigMode other
than enable (true(1)) or disable (false(2)) as defined
in this object, stpxLoopGuardConfigMode object needs to
be used.

When the stpxLoopGuardConfigMode object has the value of
enable(1), the value of stpxLoopGuardConfigEnabled for
the same instance will be true(1). When the
stpxLoopGuardConfigMode object has the value of disable(2),
the value of stpxLoopGuardConfigEnabled for the same
instance will be false(2). When the stpxLoopGuardConfigMode
object has the value of default(3), the value of
stpxLoopGuardConfigEnabled for the same instance will
depend on the object value of
stpxLoopGuardGlobalDefaultMode.

Parsed from file CISCO-STP-EXTENSIONS-MIB.mib
Module: CISCO-STP-EXTENSIONS-MIB

Description by cisco_v1

An indication of whether the LoopGuard capability is
enabled on this port or not. This configuration will be
applied to all the Spanning Tree instances in which this
port exists.

In order to support additional Loop Guard config mode
(default) as defined in stpxLoopGuardConfigMode other
than enable (true(1)) or disable (false(2)) as defined
in this object, stpxLoopGuardConfigMode object needs to
be used.

When the stpxLoopGuardConfigMode object has the value of
enable(1), the value of stpxLoopGuardConfigEnabled for
the same instance will be true(1). When the
stpxLoopGuardConfigMode object has the value of disable(2),
the value of stpxLoopGuardConfigEnabled for the same
instance will be false(2). When the stpxLoopGuardConfigMode
object has the value of default(3), the value of
stpxLoopGuardConfigEnabled for the same instance will
depend on the object value of
stpxLoopGuardGlobalDefaultMode.

Description by mibdepot

An indication of whether the LoopGuard capability is
enabled on this port or not. This configuration will be
applied to all the Spanning Tree instances in which this
port exists.

In order to support additional Loop Guard config mode
(default) as defined in stpxLoopGuardConfigMode other
than enable (true(1)) or disable (false(2)) as defined
in this object, stpxLoopGuardConfigMode object needs to
be used.

When the stpxLoopGuardConfigMode object has the value of
enable(1), the value of stpxLoopGuardConfigEnabled for
the same instance will be true(1). When the
stpxLoopGuardConfigMode object has the value of disable(2),
the value of stpxLoopGuardConfigEnabled for the same
instance will be false(2). When the stpxLoopGuardConfigMode
object has the value of default(3), the value of
stpxLoopGuardConfigEnabled for the same instance will
depend on the object value of
stpxLoopGuardGlobalDefaultMode.

Parsed from file cisco-stp-extensions.mib.txt
Company: None
Module: CISCO-STP-EXTENSIONS-MIB

Description by cisco

An indication of whether the LoopGuard capability is
enabled on this port or not. This configuration will be
applied to all the Spanning Tree instances in which this
port exists.

In order to support additional Loop Guard config mode
(default) as defined in stpxLoopGuardConfigMode other
than enable (true(1)) or disable (false(2)) as defined
in this object, stpxLoopGuardConfigMode object needs to
be used.

When the stpxLoopGuardConfigMode object has the value of
enable(1), the value of stpxLoopGuardConfigEnabled for
the same instance will be true(1). When the
stpxLoopGuardConfigMode object has the value of disable(2),
the value of stpxLoopGuardConfigEnabled for the same
instance will be false(2). When the stpxLoopGuardConfigMode
object has the value of default(3), the value of
stpxLoopGuardConfigEnabled for the same instance will
depend on the object value of
stpxLoopGuardGlobalDefaultMode.

Information by circitor

stpxLoopGuardConfigEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     deprecated 
    DESCRIPTION
            "An indication of whether the LoopGuard capability is 
            enabled on this port or not. This configuration will be
            applied to all the Spanning Tree instances in which this 
            port exists.

            In order to support additional Loop Guard config mode
            (default) as defined in stpxLoopGuardConfigMode other 
            than enable (true(1)) or disable (false(2)) as defined 
            in this object, stpxLoopGuardConfigMode object needs to 
            be used.

            When the stpxLoopGuardConfigMode object has the value of
            enable(1), the value of stpxLoopGuardConfigEnabled for 
            the same instance will be true(1). When the 
            stpxLoopGuardConfigMode object has the value of disable(2), 
            the value of stpxLoopGuardConfigEnabled for the same 
            instance will be false(2). When the stpxLoopGuardConfigMode 
            object has the value of default(3), the value of 
            stpxLoopGuardConfigEnabled for the same instance will 
            depend on the object value of 
            stpxLoopGuardGlobalDefaultMode."
    DEFVAL { false }
    ::= { stpxLoopGuardConfigEntry 2 }

Information by cisco_v1

stpxLoopGuardConfigEnabled OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "An indication of whether the LoopGuard capability is 
        enabled on this port or not. This configuration will be
        applied to all the Spanning Tree instances in which this 
        port exists.
        
        In order to support additional Loop Guard config mode
        (default) as defined in stpxLoopGuardConfigMode other 
        than enable (true(1)) or disable (false(2)) as defined 
        in this object, stpxLoopGuardConfigMode object needs to 
        be used.
        
        When the stpxLoopGuardConfigMode object has the value of
        enable(1), the value of stpxLoopGuardConfigEnabled for 
        the same instance will be true(1). When the 
        stpxLoopGuardConfigMode object has the value of disable(2), 
        the value of stpxLoopGuardConfigEnabled for the same 
        instance will be false(2). When the stpxLoopGuardConfigMode 
        object has the value of default(3), the value of 
        stpxLoopGuardConfigEnabled for the same instance will 
        depend on the object value of 
        stpxLoopGuardGlobalDefaultMode."
    DEFVAL { false }
    ::= { stpxLoopGuardConfigEntry 2 }

Information by oid_info

Vendor: Cisco
Module: CISCO-STP-EXTENSIONS-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

stpxLoopGuardConfigEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     deprecated 
    DESCRIPTION
            "An indication of whether the LoopGuard capability is 
            enabled on this port or not. This configuration will be
            applied to all the Spanning Tree instances in which this 
            port exists.

            In order to support additional Loop Guard config mode
            (default) as defined in stpxLoopGuardConfigMode other 
            than enable (true(1)) or disable (false(2)) as defined 
            in this object, stpxLoopGuardConfigMode object needs to 
            be used.

            When the stpxLoopGuardConfigMode object has the value of
            enable(1), the value of stpxLoopGuardConfigEnabled for 
            the same instance will be true(1). When the 
            stpxLoopGuardConfigMode object has the value of disable(2), 
            the value of stpxLoopGuardConfigEnabled for the same 
            instance will be false(2). When the stpxLoopGuardConfigMode 
            object has the value of default(3), the value of 
            stpxLoopGuardConfigEnabled for the same instance will 
            depend on the object value of 
            stpxLoopGuardGlobalDefaultMode."
    DEFVAL { false }
    ::= { stpxLoopGuardConfigEntry 2 }

Information by cisco

stpxLoopGuardConfigEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     deprecated 
    DESCRIPTION
            "An indication of whether the LoopGuard capability is 
            enabled on this port or not. This configuration will be
            applied to all the Spanning Tree instances in which this 
            port exists.

            In order to support additional Loop Guard config mode
            (default) as defined in stpxLoopGuardConfigMode other 
            than enable (true(1)) or disable (false(2)) as defined 
            in this object, stpxLoopGuardConfigMode object needs to 
            be used.

            When the stpxLoopGuardConfigMode object has the value of
            enable(1), the value of stpxLoopGuardConfigEnabled for 
            the same instance will be true(1). When the 
            stpxLoopGuardConfigMode object has the value of disable(2), 
            the value of stpxLoopGuardConfigEnabled for the same 
            instance will be false(2). When the stpxLoopGuardConfigMode 
            object has the value of default(3), the value of 
            stpxLoopGuardConfigEnabled for the same instance will 
            depend on the object value of 
            stpxLoopGuardGlobalDefaultMode."
    DEFVAL { false }
    ::= { stpxLoopGuardConfigEntry 2 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Brothers (2)