Reference record for OID 1.3.6.1.4.1.9.9.87.1.1.8



parent
1.3.6.1.4.1.9.9.87.1.1 (c2900SysInfo)
node code
8
node name
c2900InfoVisualIndicatorMode
dot oid
1.3.6.1.4.1.9.9.87.1.1.8
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoC2900MIB(87) c2900MIBObjects(1) c2900SysInfo(1) c2900InfoVisualIndicatorMode(8)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoC2900MIB/c2900MIBObjects/c2900SysInfo/c2900InfoVisualIndicatorMode
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/87/1/1/8

    Description by circitor

    This object reflects what is currently selected
    as the visual indication mode, selected by the
    mode button.

    The portStatus(1) mode uses the visual LEDS
    to indicate port link status.

    The fullDuplex(2) mode uses the visual LEDS
    to indicate that a port is running with full
    duplex or half duplex or no link status.

    The linkRate(3) mode uses the visual LEDS to
    indicate the rate of operation on a port:
    100 MBPS or 10 MBPS or no link.

    The utilization(4) mode uses the visual LEDS to
    indicate the utiliztion of the system as more total
    bandwidth through the switch is being utilized,
    more LED's are lit.

    Parsed from file CISCO-C2900-MIB.mib
    Module: CISCO-C2900-MIB

    Description by cisco_v1

    This object reflects what is currently selected
    as the visual indication mode, selected by the
    mode button.

    The portStatus(1) mode uses the visual LEDS
    to indicate port link status.

    The fullDuplex(2) mode uses the visual LEDS
    to indicate that a port is running with full
    duplex or half duplex or no link status.

    The linkRate(3) mode uses the visual LEDS to
    indicate the rate of operation on a port:
    100 MBPS or 10 MBPS or no link.

    The utilization(4) mode uses the visual LEDS to
    indicate the utiliztion of the system as more total
    bandwidth through the switch is being utilized,
    more LED's are lit.

    Description by oid_info

    c2900InfoVisualIndicatorMode OBJECT-TYPE
    SYNTAX INTEGER {
    portStatus(1),
    fullDuplex(2),
    linkRate(3),
    utilization(4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "This object reflects what is currently selected
    as the visual indication mode, selected by the
    mode button.
    The portStatus(1) mode uses the visual LEDS
    to indicate port link status.
    The fullDuplex(2) mode uses the visual LEDS
    to indicate that a port is running with full
    duplex or half duplex or no link status.
    The linkRate(3) mode uses the visual LEDS to
    indicate the rate of operation on a port:
    100 MBPS or 10 MBPS or no link.
    The utilization(4) mode uses the visual LEDS to
    indicate the utiliztion of the system as more total
    bandwidth through the switch is being utilized,
    more LEDs are lit."
    View at oid-info.com

    Description by mibdepot

    This object reflects what is currently selected
    as the visual indication mode, selected by the
    mode button.

    The portStatus(1) mode uses the visual LEDS
    to indicate port link status.

    The fullDuplex(2) mode uses the visual LEDS
    to indicate that a port is running with full
    duplex or half duplex or no link status.

    The linkRate(3) mode uses the visual LEDS to
    indicate the rate of operation on a port:
    100 MBPS or 10 MBPS or no link.

    The utilization(4) mode uses the visual LEDS to
    indicate the utiliztion of the system as more total
    bandwidth through the switch is being utilized,
    more LED's are lit.

    Parsed from file CISCO-C2900-MIB.my.txt
    Company: None
    Module: CISCO-C2900-MIB

    Description by cisco

    This object reflects what is currently selected
    as the visual indication mode, selected by the
    mode button.

    The portStatus(1) mode uses the visual LEDS
    to indicate port link status.

    The fullDuplex(2) mode uses the visual LEDS
    to indicate that a port is running with full
    duplex or half duplex or no link status.

    The linkRate(3) mode uses the visual LEDS to
    indicate the rate of operation on a port:
    100 MBPS or 10 MBPS or no link.

    The utilization(4) mode uses the visual LEDS to
    indicate the utiliztion of the system as more total
    bandwidth through the switch is being utilized,
    more LED's are lit.

    Information by circitor

    c2900InfoVisualIndicatorMode OBJECT-TYPE
   SYNTAX  INTEGER {
             portStatus(1),
             fullDuplex(2),
             linkRate(3),
             utilization(4)
            }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "This object reflects what is currently selected
         as the visual indication mode, selected by the
         mode button.

         The portStatus(1) mode uses the visual LEDS
         to indicate port link status.

         The fullDuplex(2) mode uses the visual LEDS
         to indicate that a port is running with full
         duplex or half duplex or no link status.

         The linkRate(3) mode uses the visual LEDS to
         indicate the rate of operation on a port:
         100 MBPS or 10 MBPS or no link.

         The utilization(4) mode uses the visual LEDS to
         indicate the utiliztion of the system as more total
         bandwidth through the switch is being utilized,
         more LED's are lit."
        ::= { c2900SysInfo 8}

    Information by cisco_v1

    c2900InfoVisualIndicatorMode OBJECT-TYPE
    SYNTAX INTEGER {
        portStatus(1),
        fullDuplex(2),
        linkRate(3),
        utilization(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects what is currently selected
         as the visual indication mode, selected by the
         mode button.
        
         The portStatus(1) mode uses the visual LEDS
         to indicate port link status.
        
         The fullDuplex(2) mode uses the visual LEDS
         to indicate that a port is running with full
         duplex or half duplex or no link status.
        
         The linkRate(3) mode uses the visual LEDS to
         indicate the rate of operation on a port:
         100 MBPS or 10 MBPS or no link.
        
         The utilization(4) mode uses the visual LEDS to
         indicate the utiliztion of the system as more total
         bandwidth through the switch is being utilized,
         more LED's are lit."
    ::= { c2900SysInfo 8 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    c2900InfoVisualIndicatorMode OBJECT-TYPE
   SYNTAX  INTEGER {
             portStatus(1),
             fullDuplex(2),
             linkRate(3),
             utilization(4)
            }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "This object reflects what is currently selected
         as the visual indication mode, selected by the
         mode button.

         The portStatus(1) mode uses the visual LEDS
         to indicate port link status.

         The fullDuplex(2) mode uses the visual LEDS
         to indicate that a port is running with full
         duplex or half duplex or no link status.

         The linkRate(3) mode uses the visual LEDS to
         indicate the rate of operation on a port:
         100 MBPS or 10 MBPS or no link.

         The utilization(4) mode uses the visual LEDS to
         indicate the utiliztion of the system as more total
         bandwidth through the switch is being utilized,
         more LED's are lit."
        ::= { c2900SysInfo 8}

    Information by cisco

    c2900InfoVisualIndicatorMode OBJECT-TYPE
   SYNTAX  INTEGER {
             portStatus(1),
             fullDuplex(2),
             linkRate(3),
             utilization(4)
            }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "This object reflects what is currently selected
         as the visual indication mode, selected by the
         mode button.

         The portStatus(1) mode uses the visual LEDS
         to indicate port link status.

         The fullDuplex(2) mode uses the visual LEDS
         to indicate that a port is running with full
         duplex or half duplex or no link status.

         The linkRate(3) mode uses the visual LEDS to
         indicate the rate of operation on a port:
         100 MBPS or 10 MBPS or no link.

         The utilization(4) mode uses the visual LEDS to
         indicate the utiliztion of the system as more total
         bandwidth through the switch is being utilized,
         more LED's are lit."
        ::= { c2900SysInfo 8}

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.87.1.1.8.0 c2900InfoVisualIndicatorMode 0 0 None

    Brothers (9)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.87.1.1.1 c2900InfoBoardRevision 1 1 Returns the revision number of the main board
    on which the FastSwitch firmware resides.
    1.3.6.1.4.1.9.9.87.1.1.2 c2900InfoPeakBuffersUsed 1 1 The maximum number of 64-byte buffers used in the
    main switch buffer pool.
    1.3.6.1.4.1.9.9.87.1.1.3 c2900InfoTotalBufferDepth 1 1 It represents the total number of 64-byte buffers
    in the Ethernet Controller.
    1.3.6.1.4.1.9.9.87.1.1.4 c2900InfoAddrCapacity 1 1 The system-wide maximum number of MAC addresses
    supported in the address table, a primary
    resource when forwarding frames through…
    1.3.6.1.4.1.9.9.87.1.1.5 c2900InfoRestrictedStaticAddrCapacity 1 1 The system-wide maximum number of static addresses
    supported. A static address is one that has explicit
    source port filtering in…
    1.3.6.1.4.1.9.9.87.1.1.6 c2900InfoSelfTestFailed 1 1 A bit array where the presence of a particular bit
    indicates a failure of a specific Power On Self Test.
    Bit 0 - System Board Fai…
    1.3.6.1.4.1.9.9.87.1.1.7 c2900InfoUtilDisplay 1 1 The number of utilization meter LEDs currently
    lit on the front panel, if the value of
    c2900InfoVisualIndicatorMode is selected a…
    1.3.6.1.4.1.9.9.87.1.1.9 c2900InfoRedunantPowerSupplyInfo 1 1 The switch allows a redundant power supply in addition
    to its local power supply. Only one power source can be
    supplying power to…
    1.3.6.1.4.1.9.9.87.1.1.10 c2900InfoBoardIdentifier 1 1 Returns the identifier of the main board
    on which the FastSwitch firmware resides.