Specifies what type of circuit this is. The X.25 circuit is set up
with the same name as the ALC circuit so we need this
variable to distinguish between the two.
Parsed from file CISCO-ALPS-MIB.mib
Module: CISCO-ALPS-MIB
Specifies what type of circuit this is. The X.25 circuit is set up
with the same name as the ALC circuit so we need this
variable to distinguish between the two.
alpsCktAscuCktDlcType OBJECT-TYPE
SYNTAX INTEGER {
emtox(1),
ax25(2),
alc(3),
uts(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies what type of circuit this is. The X.25 circuit is set up
with the same name as the ALC circuit so we need this
variable to distinguish between the two."
View at oid-info.com
Specifies what type of circuit this is. The X.25 circuit is set up
with the same name as the ALC circuit so we need this
variable to distinguish between the two.
Parsed from file CISCO-ALPS-MIB.my.txt
Company: None
Module: CISCO-ALPS-MIB
Specifies what type of circuit this is. The X.25 circuit is set up
with the same name as the ALC circuit so we need this
variable to distinguish between the two.
alpsCktAscuCktDlcType OBJECT-TYPE SYNTAX INTEGER { emtox(1), ax25(2), alc(3), uts(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies what type of circuit this is. The X.25 circuit is set up with the same name as the ALC circuit so we need this variable to distinguish between the two." ::= { alpsCktAscuEntry 2 }
alpsCktAscuCktDlcType OBJECT-TYPE SYNTAX INTEGER { emtox(1), ax25(2), alc(3), uts(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Specifies what type of circuit this is. The X.25 circuit is set up with the same name as the ALC circuit so we need this variable to distinguish between the two." ::= { alpsCktAscuEntry 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
alpsCktAscuCktDlcType OBJECT-TYPE SYNTAX INTEGER { emtox(1), ax25(2), alc(3), uts(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies what type of circuit this is. The X.25 circuit is set up with the same name as the ALC circuit so we need this variable to distinguish between the two." ::= { alpsCktAscuEntry 2 }
alpsCktAscuCktDlcType OBJECT-TYPE SYNTAX INTEGER { emtox(1), ax25(2), alc(3), uts(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies what type of circuit this is. The X.25 circuit is set up with the same name as the ALC circuit so we need this variable to distinguish between the two." ::= { alpsCktAscuEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.95.1.3.4.1.1 | alpsCktAscuCktName | 0 | 0 | The name of the ALPS circuit which this ASCU is on. The circuit may be always up (for permanent circuits) or get set up (dynamic … |
| 1.3.6.1.4.1.9.9.95.1.3.4.1.3 | alpsCktAscuA1 | 0 | 0 | A1 value. This is used along with the alpsCktAscuA2 value to identify the ASCU within the circuit. |
| 1.3.6.1.4.1.9.9.95.1.3.4.1.4 | alpsCktAscuA2 | 0 | 0 | A2 value. This is used along with the alpsCktAscuA1 value to identify the ASCU within the circuit. |
| 1.3.6.1.4.1.9.9.95.1.3.4.1.5 | alpsCktAscuIfIndex | 0 | 0 | Reports the interface the ASCU is on. This field, along with alpsCktAscuId is provided so that it is possible to correlate this i… |
| 1.3.6.1.4.1.9.9.95.1.3.4.1.6 | alpsCktAscuId | 0 | 0 | Reports the ASCU Identifier which uniquely identifies an ASCU on a given interface. This value is the Interface Address (IA) for … |
| 1.3.6.1.4.1.9.9.95.1.3.4.1.7 | alpsCktAscuStatus | 0 | 0 | Reports the ASCU status - ASCUs configured on the circuit can be rejected at the host and would then be marked REJECT. Also, ASCU… |