NTP Reference Clock Identifier. This is a
32 bit code identifying the particular reference
clock. In the case of stratum 0 (unspecified) or
stratum 1 (primary reference), this is a four-
octet, left-justified, zero-padded ASCII string.
While not enumerated as part of the NTP spec, the
following are suggested ASCII identifiers:
==============================================
DCN DCN routing protocol
NIST NIST public modem
TSP TSP time protocol
DTS Digital Time Service
ATOM Atomic clock (calibrated)
VLF VLF radio (OMEGA,etc.)
callsign Generic radio
LORC LORAN-C radionavigation
GOES GOES UHF environment satellite
GPS GPS UHF satellite positioning
==============================================
The following ref ids are used by the SyncServer:
==============================================
GPS GPS satellite)
IRIG IRIG B timecode
1PPS Ext. 1 PPS input
E10M Ext. 10 MHz input
FREE Internal Clock
FLY Internal Clock after the Hardware
Clock reference is lost
==============================================
Parsed from file SYMM-SMI.mib
Module: SYMM-SMI
Vendor: Symmetricom
Module: SYMM-SMI
[Automatically extracted from oidview.com]
ntpSysRefID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "NTP Reference Clock Identifier. This is a 32 bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference), this is a four- octet, left-justified, zero-padded ASCII string. While not enumerated as part of the NTP spec, the following are suggested ASCII identifiers: ============================================== DCN DCN routing protocol NIST NIST public modem TSP TSP time protocol DTS Digital Time Service ATOM Atomic clock (calibrated) VLF VLF radio (OMEGA,etc.) callsign Generic radio LORC LORAN-C radionavigation GOES GOES UHF environment satellite GPS GPS UHF satellite positioning ============================================== The following ref ids are used by the SyncServer: ============================================== GPS GPS satellite) IRIG IRIG B timecode 1PPS Ext. 1 PPS input E10M Ext. 10 MHz input FREE Internal Clock FLY Internal Clock after the Hardware Clock reference is lost ==============================================" ::= {ntpSystem 6}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.1 | ntpSysLeap | 0 | 0 | NTP Leap Indicator. This is a two-bit code warning of an impending leap second to be inserted into the NTP timescale. The bits … |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.2 | ntpSysStratum | 0 | 0 | Current NTP stratum level. This is an integer indicating the stratum of the local clock with values defined as follows: =========… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.3 | ntpSysPrecision | 0 | 0 | Current NTP precision value. This is a signed integer indicating the precision of the various clocks, in seconds to the nearest … |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.4 | ntpSysRootDelay | 0 | 0 | Total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.5 | ntpSysRootDispersion | 0 | 0 | Maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive valu… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.7 | ntpSysRefTime | 0 | 0 | ntpSysReftime |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.8 | ntpSysPoll | 0 | 0 | Minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum in… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.9 | ntpSysPeer | 0 | 0 | Current synchronization source. In stratum > 1 this variable returns the decimal representation of the IPv4 address of its curre… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.10 | ntpSysPhase | 0 | 0 | System clock offset from the selected source. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.11 | ntpSysFreq | 0 | 0 | System clock frequency correction from ntpd. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.12 | ntpSysError | 0 | 0 | Current system error from ntpd. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.13 | ntpSysClock | 0 | 0 | Current system time from ntpd. This is usually derived from the hardware clock but could be from any other ntp source. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.14 | ntpSysSystem | 0 | 0 | Description of the current system. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.15 | ntpSysProcessor | 0 | 0 | Type of local processor. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.16 | ntpSysNotrust | 0 | 0 | Force authentication. |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.17 | ntpSysPktsReceived | 0 | 0 | This variable is a rollover counter which reflects the number of ntp packets received by the SyncServer. It is valid for all vers… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.18 | ntpSysMode | 0 | 0 | An integer indicating the NTP association mode and are coded as follows: ============================================ 0 unsp… |
| 1.3.6.1.4.1.9070.1.2.3.1.5.1.1.19 | ntpSysVersion | 0 | 0 | The version of the NTP daemon on the system. |