The number of bytes of data to be added to the loopback packet
after each successful loopback packet transmission and
reception. When the port's maximum packet size has been reached,
the ES/1 automatically begins again, starting with
lpbkPktLength.
Parsed from file ctATX-mib.mib.txt
Company: None
Module: CTATX-MIB
The number of bytes of data to be added to the loopback packet
after each successful loopback packet transmission and
reception. When the port's maximum packet size has been reached,
the ES/1 automatically begins again, starting with
lpbkPktLength.
Parsed from file CTATX-MIB.mib
Module: CTATX-MIB
lpbkIncrements OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of bytes of data to be added to the loopback packet after each successful loopback packet transmission and reception. When the port's maximum packet size has been reached, the ES/1 automatically begins again, starting with lpbkPktLength." ::= { lpbkEntry 7 }
Vendor: Sigma Network Systems, Inc.
Module: CTATX-MIB
[Automatically extracted from oidview.com]
lpbkIncrements OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of bytes of data to be added to the loopback packet after each successful loopback packet transmission and reception. When the port's maximum packet size has been reached, the ES/1 automatically begins again, starting with lpbkPktLength." ::= { lpbkEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.97.3.13.1.1.1 | lpbkIndex | 0 | 0 | The port number, beginning with 1 for the first port. |
1.3.6.1.4.1.97.3.13.1.1.2 | lpbkOperation | 0 | 0 | The type of loopback being performed. Setting lpbkOperation to loopback-off causes loop back operation to terminate. Setting lpbk… |
1.3.6.1.4.1.97.3.13.1.1.3 | lpbkDestAddr | 0 | 0 | The MAC address of the target device, only needed for remote loopback. |
1.3.6.1.4.1.97.3.13.1.1.4 | lpbkPktNum | 0 | 0 | The number of loopback packets to be transmitted. |
1.3.6.1.4.1.97.3.13.1.1.5 | lpbkInterval | 0 | 0 | The desired time delay between the reception of a looped back packet, and the transmission of the next packet to be looped back. |
1.3.6.1.4.1.97.3.13.1.1.6 | lpbkPktLength | 0 | 0 | The length (in octets) of the loopback packet. The values of the data itself are automatically selected by the ES/1. |
1.3.6.1.4.1.97.3.13.1.1.8 | lpbkGoods | 0 | 0 | The number of packets successfully looped back. This number is automatically reset to zero, whenever loopback operation is initia… |
1.3.6.1.4.1.97.3.13.1.1.9 | lpbkErrorNoReceives | 0 | 0 | The number of packets which were transmitted, but not received. This number is automatically reset to zero, whenever loopback ope… |
1.3.6.1.4.1.97.3.13.1.1.10 | lpbkErrorBadReceives | 0 | 0 | The number of transmitted packets which were received with different data patterns. This number is automatically reset to zero, w… |
1.3.6.1.4.1.97.3.13.1.1.11 | lpbkErrorSize | 0 | 0 | The length of the last loopback packet which caused either lpbkErrorNoReceives or lpbkErrorBadReceives to be incremented. This nu… |
1.3.6.1.4.1.97.3.13.1.1.12 | lpbkErrorSent | 0 | 0 | The transmitted bytes (0-4) of data within the last loopback packet which caused lpbkErrorBadReceives to be incremented. This par… |
1.3.6.1.4.1.97.3.13.1.1.13 | lpbkErrorReceived | 0 | 0 | The received bytes (0-4) of data within the last loopback packet which caused lpbkErrorBadReceives to be incremented. This parame… |
1.3.6.1.4.1.97.3.13.1.1.14 | lpbkErrorOffset | 0 | 0 | The byte offset (one being the first byte) within the loopback packet where lpbkErrorSent begins. This number is automatically re… |