The number times an address was not learned
due to insufficient address table space.
Parsed from file ctELS10-mib.mib.txt
Company: cai
Module: CT-ELS10-MIB
lxaddrDynamicOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number times an address was not learned due to insufficient address table space." ::= { lxaddr 4 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.7.5.4.0 | lxaddrDynamicOverflows | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.97.7.5.1 | lxaddrStatics | 1 | 1 | The number of static addresses which are currently stored in the ES-10. |
| 1.3.6.1.4.1.97.7.5.2 | lxaddrDynamics | 1 | 1 | The number of learned addresses in the address table. |
| 1.3.6.1.4.1.97.7.5.3 | lxaddrDynamicMax | 1 | 1 | The maximum number of spanning tree addresses which have been learned since the ES-10 was last booted (or this parameter was last… |
| 1.3.6.1.4.1.97.7.5.5 | lxaddrFlags | 1 | 1 | Flags to describe the use and control of this address entry. Each bit has a different meaning. The NMS must always set either en… |
| 1.3.6.1.4.1.97.7.5.6 | lxaddrMAC | 1 | 1 | The MAC address for this address definition. |
| 1.3.6.1.4.1.97.7.5.7 | lxaddrPort | 1 | 1 | The port through which this address is connected to the ES-10 (only valid for entry-dynamic-local, entry-statistics, and entry-po… |
| 1.3.6.1.4.1.97.7.5.8 | lxaddrOperation | 1 | 1 | The operation to be performed upon the described address. The possibilities include: read-random (1), read-next (2), zero-stats … |
| 1.3.6.1.4.1.97.7.5.9 | lxaddrIndex | 1 | 1 | The index number to be used for read-next and read-block operations. When the ES-10 boots, addrIndex is initialized to -1. |
| 1.3.6.1.4.1.97.7.5.10 | lxaddrNext | 1 | 1 | The next value to use for addrIndex, when you use read-next or read-block operations to read the address table. When the ES-10 bo… |
| 1.3.6.1.4.1.97.7.5.19 | lxaddrBlockSize | 1 | 1 | The number of addresses contained by addrBlock. This parameter is only used for dumping blocks of MAC addresses. |
| 1.3.6.1.4.1.97.7.5.20 | lxaddrBlock | 1 | 1 | A series of 0-700 octets, which represents 0-100 addresses. Each address consists of a 6 octet MacAddress followed by a 1 byte p… |