kxadminNAMReceiveCongests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { kxadmin 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.97.8.3.1 | kxadminFatalErr | 0 | 0 | This is a 32 byte array which contains information about the cause of the previous system reset. This will describe the circumsta… |
1.3.6.1.4.1.97.8.3.2 | kxadminAnyPass | 0 | 0 | The authentication password (0-24 bytes) which must match the community name in an SNMP PDU, in order for the operation to be per… |
1.3.6.1.4.1.97.8.3.3 | kxadminGetPass | 0 | 0 | The authentication password (0-24 bytes) which must match the community name in an SNMP Get PDU (except for Debug or password par… |
1.3.6.1.4.1.97.8.3.4 | kxadminNMSIPAddr | 0 | 0 | The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS las… |
1.3.6.1.4.1.97.8.3.5 | kxadminStorageFailure | 0 | 0 | Whether the ELS-100's storage facility for its configuration parameters has failed (the ELS-100 may not be able to reboot after s… |
1.3.6.1.4.1.97.8.3.6 | kxadminAuthenticationFailure | 0 | 0 | All nulls, or the IP source address within the last SNMP PDU which caused an SNMP authentication failure. |
1.3.6.1.4.1.97.8.3.8 | kxadminArpEntries | 0 | 0 | The number of ARP entries for all interfaces. |
1.3.6.1.4.1.97.8.3.9 | kxadminArpStatics | 0 | 0 | The number of statically defined ARP entries for all interfaces. |
1.3.6.1.4.1.97.8.3.10 | kxadminArpOverflows | 0 | 0 | The number of times a ARP entry could not be learned due to insufficient address table space. |
1.3.6.1.4.1.97.8.3.11 | kxadminRipPreference | 0 | 0 | The value to assign to ipRouteMetric2, when adding a RIP-learned entry to the IP Routing Table. |
1.3.6.1.4.1.97.8.3.12 | kxadminRipRouteDiscards | 0 | 0 | The number of times a route learned via RIP was not added to the IP Routing Table due to insufficient Routing Table space. |
1.3.6.1.4.1.97.8.3.13 | kxadminRebootConfig | 0 | 0 | The configuration file that will be used when the ELS-100 reboots. This parameter is normally automatically set by the ELS-100; h… |
1.3.6.1.4.1.97.8.3.14 | kxadminDisableButton | 0 | 0 | None |
1.3.6.1.4.1.97.8.3.15 | kxadminButtonSelection | 0 | 0 | None |
1.3.6.1.4.1.97.8.3.16 | kxadminLEDProgramOption | 0 | 0 | None |