OID reference

bgpPeergrHoldTimeConfigd

1.2.826.42.1.1578918.5.65.1.5.7.1.18

Description

Time interval in seconds for the Hold Time configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bgpPeerHoldTimeConfigd. This value is placed in an OPEN message sent to peers in this peer group by this BGP speaker, and is compared with the Hold Time field in …

Full description and source information

Identification

Identifier and names

Parent
1.2.826.42.1.1578918.5.65.1.5.7.1 (bgpPeergrEntry)
Node code
18
Node name
bgpPeergrHoldTimeConfigd
Category
SNMP management object
Numeric OID
1.2.826.42.1.1578918.5.65.1.5.7.1.18
URN notation
urn:oid:1.2.826.42.1.1578918.5.65.1.5.7.1.18
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 2 826 42 1 1578918 5 65 1 5 7 1 18}

  • {iso(1) member-body(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrHoldTimeConfigd(18)}
  • {iso(1) memberBody(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrHoldTimeConfigd(18)}
OID-IRI notation
  • /1/2/826/42/1/1578918/5/65/1/5/7/1/18
  • /ISO/Member-Body/GB/42/1/1578918/5/65/1/5/7/1/18
  • /ISO/Member-Body/826/42/1/1578918/5/65/1/5/7/1/18
  • /ISO/2/826/42/1/1578918/5/65/1/5/7/1/18
Named path variants
  • /iso/member-body/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrHoldTimeConfigd
  • /iso/memberBody/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrHoldTimeConfigd

SNMP properties

Value type
Unsigned32
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
90

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: bgpRmEntIndex, bgpPeergrIndex.

snmpwalk [connection options] DEVICE .1.2.826.42.1.1578918.5.65.1.5.7.1.18

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

bgpPeergrHoldTimeConfigd OBJECT-TYPE
    SYNTAX      Unsigned32 ( 0 | 3..65535 )
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Time interval in seconds for the Hold Time configured for
                 this BGP speaker with peers in this peer group.

                 For individual peers, this can be configured using
                 bgpPeerHoldTimeConfigd.

                 This value is placed in an OPEN message sent to peers in
                 this peer group by this BGP speaker, and is compared with
                 the Hold Time field in an OPEN message received from the
                 peer when determining the Hold Time (bgpPeerHoldTime) with
                 the peer.  This value must not be less than three seconds
                 if it is not zero (0) in which case the Hold Time is NOT
                 to be established with the peer.  The value of this object
                 is only allowed to be zero (0) if the value of
                 bgpPeergrKeepAliveConfigd is also zero (0).  The suggested
                 value for this timer is 90 seconds.

                 This field can be changed at any time.  However, if a peer
                 is configured to use the peer group field and the field is
                 changed while the peer is active, depending on the setting
                 of the bgpPeergrResetPeerOnCfgChange field, the peer
                 session may either be immediately reset, or the
                 configuration change is not applied until the peer session
                 is restarted."
    DEFVAL { 90 }
    ::= { bgpPeergrEntry 18 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Time interval in seconds for the Hold Time configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bgpPeerHoldTimeConfigd. This value is placed in an OPEN message sent to peers in this peer group by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The value of this object is only allowed to be zero (0) if the value of bgpPeergrKeepAliveConfigd is also zero (0). The suggested value for this timer is 90 seconds. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

bgpPeergrHoldTimeConfigd · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: bgpPeergrHoldTimeConfigd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "bgpPeergrHoldTimeConfigd",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "(",
    "0",
    "|",
    "3",
    ".",
    ".",
    "65535",
    ")",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Time interval in seconds for the Hold Time configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bgpPeerHoldTimeConfigd. This value is placed in an OPEN message sent to peers in this peer group by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The value of this object is only allowed to be zero (0) if the value of bgpPeergrKeepAliveConfigd is also zero (0). The suggested value for this timer is 90 seconds. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted.\"",
    "DEFVAL",
    "{",
    "90",
    "}",
    "::=",
    "{",
    "bgpPeergrEntry",
    "18",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32",
      [
        "integerSubType",
        [
          [
            0
          ],
          [
            3,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Time interval in seconds for the Hold Time configured for this BGP speaker with peers in this peer group. For individual peers, this can be configured using bgpPeerHoldTimeConfigd. This value is placed in an OPEN message sent to peers in this peer group by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The value of this object is only allowed to be zero (0) if the value of bgpPeergrKeepAliveConfigd is also zero (0). The suggested value for this timer is 90 seconds. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      90
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.2.826)

The UK Name Registration Authority

Current Registration Authority (inferred from ancestor 1.2.826)

Mark Barratt or Vanessa Tatler

Siblings (69)

OIDNameDirect childrenDescendantsDescription
1.2.826.42.1.1578918.5.65.1.5.7.1.2 bgpPeergrIndex00
1.2.826.42.1.1578918.5.65.1.5.7.1.3 bgpPeergrRowStatus00
1.2.826.42.1.1578918.5.65.1.5.7.1.4 bgpPeergrConfig00
1.2.826.42.1.1578918.5.65.1.5.7.1.5 bgpPeergrArea00
1.2.826.42.1.1578918.5.65.1.5.7.1.6 bgpPeergrAggrConfedAS00
1.2.826.42.1.1578918.5.65.1.5.7.1.7 bgpPeergrSoftResetWithStoredInfo00
1.2.826.42.1.1578918.5.65.1.5.7.1.8 bgpPeergrAllowLocalAs00
1.2.826.42.1.1578918.5.65.1.5.7.1.9 bgpPeergrDisableSenderLoopDetect00
1.2.826.42.1.1578918.5.65.1.5.7.1.10 bgpPeergrNxtHopSlf00
1.2.826.42.1.1578918.5.65.1.5.7.1.11 bgpPeergrThirdPtyNxtHop00
1.2.826.42.1.1578918.5.65.1.5.7.1.12 bgpPeergrNxtHopPeer00
1.2.826.42.1.1578918.5.65.1.5.7.1.13 bgpPeergrEnableAttributeDiscard00
1.2.826.42.1.1578918.5.65.1.5.7.1.14 bgpPeergrSendComm00
1.2.826.42.1.1578918.5.65.1.5.7.1.15 bgpPeergrSendExtComm00
1.2.826.42.1.1578918.5.65.1.5.7.1.16 bgpPeergrPassword00
1.2.826.42.1.1578918.5.65.1.5.7.1.17 bgpPeergrReflectorClient00
1.2.826.42.1.1578918.5.65.1.5.7.1.19 bgpPeergrKeepAliveConfigd00
1.2.826.42.1.1578918.5.65.1.5.7.1.20 bgpPeergrTtl00
1.2.826.42.1.1578918.5.65.1.5.7.1.21 bgpPeergrMinRteAdvertiseInterval00
1.2.826.42.1.1578918.5.65.1.5.7.1.22 bgpPeergrMinRteWithdrawInterval00
1.2.826.42.1.1578918.5.65.1.5.7.1.23 bgpPeergrConfigMaxPrfx00
1.2.826.42.1.1578918.5.65.1.5.7.1.24 bgpPeergrConfAltLocalAs00
1.2.826.42.1.1578918.5.65.1.5.7.1.25 bgpPeergrWeight00
1.2.826.42.1.1578918.5.65.1.5.7.1.26 bgpPeergrFallover00
1.2.826.42.1.1578918.5.65.1.5.7.1.27 bgpPeergrRemoteAs00
1.2.826.42.1.1578918.5.65.1.5.7.1.28 bgpPeergrCheckFirstAsNum00
1.2.826.42.1.1578918.5.65.1.5.7.1.29 bgpPeergrConfedMember00
1.2.826.42.1.1578918.5.65.1.5.7.1.30 bgpPeergrTrapEstab00
1.2.826.42.1.1578918.5.65.1.5.7.1.31 bgpPeergrTrapBackw00
1.2.826.42.1.1578918.5.65.1.5.7.1.32 bgpPeergrConnectRetryInterval00
1.2.826.42.1.1578918.5.65.1.5.7.1.33 bgpPeergrMinASOriginationInt00
1.2.826.42.1.1578918.5.65.1.5.7.1.34 bgpPeergrConfigDropWarn00
1.2.826.42.1.1578918.5.65.1.5.7.1.35 bgpPeergrConfigPassive00
1.2.826.42.1.1578918.5.65.1.5.7.1.36 bgpPeergrConfigOpenDelay00
1.2.826.42.1.1578918.5.65.1.5.7.1.37 bgpPeergrConfigIdleHold00
1.2.826.42.1.1578918.5.65.1.5.7.1.38 bgpPeergrCheckNextHop00
1.2.826.42.1.1578918.5.65.1.5.7.1.39 bgpPeergrMaxOrfEntries00
1.2.826.42.1.1578918.5.65.1.5.7.1.40 bgpPeergrPeeringType00
1.2.826.42.1.1578918.5.65.1.5.7.1.41 bgpPeergrDisableRouteRefresh00
1.2.826.42.1.1578918.5.65.1.5.7.1.42 bgpPeergrTrapPrefix00
1.2.826.42.1.1578918.5.65.1.5.7.1.43 bgpPeergrConfigThreshold00
1.2.826.42.1.1578918.5.65.1.5.7.1.44 bgpPeergrMaxPrfxHold00
1.2.826.42.1.1578918.5.65.1.5.7.1.45 bgpPeergrTrapGrHelperState00
1.2.826.42.1.1578918.5.65.1.5.7.1.46 bgpPeergrConfAltLocalAsMode00
1.2.826.42.1.1578918.5.65.1.5.7.1.47 bgpPeergrBfdDesired00
1.2.826.42.1.1578918.5.65.1.5.7.1.48 bgpPeergrDmzLink00
1.2.826.42.1.1578918.5.65.1.5.7.1.49 bgpPeergrRemovePrivate00
1.2.826.42.1.1578918.5.65.1.5.7.1.50 bgpPeergrAsOverride00
1.2.826.42.1.1578918.5.65.1.5.7.1.51 bgpPeergrUpdateGroup00
1.2.826.42.1.1578918.5.65.1.5.7.1.52 bgpPeergrDistListAclIn00