OID reference

pimAnycastRPSetTable

1.2.826.42.1.1578918.5.71.1.1.1.12

Description

This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are as…

Full description and source information

Identification

Identifier and names

Parent
1.2.826.42.1.1578918.5.71.1.1.1 (pimTables)
Node code
12
Node name
pimAnycastRPSetTable
Category
SNMP management object
Numeric OID
1.2.826.42.1.1578918.5.71.1.1.1.12
URN notation
urn:oid:1.2.826.42.1.1578918.5.71.1.1.1.12
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 2 826 42 1 1578918 5 71 1 1 1 12}

  • {iso(1) member-body(2) gb(826) 42 1 1578918 5 71 dcPimMIB(1) pimMIBObjects(1) pimTables(1) pimAnycastRPSetTable(12)}
  • {iso(1) memberBody(2) gb(826) 42 1 1578918 5 71 dcPimMIB(1) pimMIBObjects(1) pimTables(1) pimAnycastRPSetTable(12)}
OID-IRI notation
  • /1/2/826/42/1/1578918/5/71/1/1/1/12
  • /ISO/Member-Body/GB/42/1/1578918/5/71/1/1/1/12
  • /ISO/Member-Body/826/42/1/1578918/5/71/1/1/1/12
  • /ISO/2/826/42/1/1578918/5/71/1/1/1/12
Named path variants
  • /iso/member-body/gb/42/1/1578918/5/71/dcPimMIB/pimMIBObjects/pimTables/pimAnycastRPSetTable
  • /iso/memberBody/gb/42/1/1578918/5/71/dcPimMIB/pimMIBObjects/pimTables/pimAnycastRPSetTable

SNMP properties

Value type
SEQUENCE OF PimAnycastRPSetEntry
Maximum access defined by MIB
not-accessible
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

pimAnycastRPSetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF PimAnycastRPSetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION "This table is used to create and manage Anycast-RP via PIM
                 Register messages (draft-ietf-pim-anycast-rp), as opposed to
                 via other protocols such as MSDP.

                 Entries must be configured in this table if and only if the
                 local router is a member of one or more Anycast-RP sets,
                 that is, one or more Anycast-RP addresses are assigned to
                 the local router.  Note that if using static RP
                 configuration, this is in addition to, not instead of, the
                 pimStaticRP[Multi]Table entries that must be configured for
                 the Anycast-RPs.

                 The set of rows with the same values of both
                 pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
                 corresponds to the Anycast-RP set for that Anycast-RP
                 address.  The maximum number of remote routers in an
                 Anycast-RP set is given by the value of the customizable
                 constant QPTM_ANYCAST_RP_MAX_REM_RTR.

                 Exactly one entry per Anycast-RP set corresponds to the
                 local router.  That entry is identified by the
                 pimAnycastRPSetLocalRouter object, and determines the source
                 address used by the local router when forwarding PIM
                 Register messages to the other routers in the Anycast-RP
                 set.

                 This table is only used by PIM-SM.  Rows are ignored if
                 any of the following are true:

                 - pimTmEntMgmdProxy is set to 'true'

                 - 'sparse' is clear for pimTmEntMode."
    ::= { pimTables 12 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRP[Multi]Table entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. The maximum number of remote routers in an Anycast-RP set is given by the value of the customizable constant QPTM_ANYCAST_RP_MAX_REM_RTR. Exactly one entry per Anycast-RP set corresponds to the local router. That entry is identified by the pimAnycastRPSetLocalRouter object, and determines the source address used by the local router when forwarding PIM Register messages to the other routers in the Anycast-RP set. This table is only used by PIM-SM. Rows are ignored if any of the following are true: - pimTmEntMgmdProxy is set to 'true' - 'sparse' is clear for pimTmEntMode.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

pimAnycastRPSetTable · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: pimAnycastRPSetTable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pimAnycastRPSetTable",
    "OBJECT-TYPE",
    "SYNTAX",
    "SEQUENCE",
    "OF",
    "PimAnycastRPSetEntry",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRP[Multi]Table entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. The maximum number of remote routers in an Anycast-RP set is given by the value of the customizable constant QPTM_ANYCAST_RP_MAX_REM_RTR. Exactly one entry per Anycast-RP set corresponds to the local router. That entry is identified by the pimAnycastRPSetLocalRouter object, and determines the source address used by the local router when forwarding PIM Register messages to the other routers in the Anycast-RP set. This table is only used by PIM-SM. Rows are ignored if any of the following are true: - pimTmEntMgmdProxy is set to 'true' - 'sparse' is clear for pimTmEntMode.\"",
    "::=",
    "{",
    "pimTables",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "conceptualTable",
      [
        "row",
        "PimAnycastRPSetEntry"
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This table is used to create and manage Anycast-RP via PIM Register messages (draft-ietf-pim-anycast-rp), as opposed to via other protocols such as MSDP. Entries must be configured in this table if and only if the local router is a member of one or more Anycast-RP sets, that is, one or more Anycast-RP addresses are assigned to the local router. Note that if using static RP configuration, this is in addition to, not instead of, the pimStaticRP[Multi]Table entries that must be configured for the Anycast-RPs. The set of rows with the same values of both pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress corresponds to the Anycast-RP set for that Anycast-RP address. The maximum number of remote routers in an Anycast-RP set is given by the value of the customizable constant QPTM_ANYCAST_RP_MAX_REM_RTR. Exactly one entry per Anycast-RP set corresponds to the local router. That entry is identified by the pimAnycastRPSetLocalRouter object, and determines the source address used by the local router when forwarding PIM Register messages to the other routers in the Anycast-RP set. This table is only used by PIM-SM. Rows are ignored if any of the following are true: - pimTmEntMgmdProxy is set to 'true' - 'sparse' is clear for pimTmEntMode."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.2.826)

The UK Name Registration Authority

Current Registration Authority (inferred from ancestor 1.2.826)

Mark Barratt or Vanessa Tatler

Direct children (1)

OIDNameDirect childrenDescendantsDescription
1.2.826.42.1.1578918.5.71.1.1.1.12.1 pimAnycastRPSetEntry66

Siblings (22)

OIDNameDirect childrenDescendantsDescription
1.2.826.42.1.1578918.5.71.1.1.1.1 pimInterfaceTable152
1.2.826.42.1.1578918.5.71.1.1.1.2 pimNeighborTable119
1.2.826.42.1.1578918.5.71.1.1.1.3 pimNbrSecAddressTable15
1.2.826.42.1.1578918.5.71.1.1.1.4 pimStarGTable121
1.2.826.42.1.1578918.5.71.1.1.1.5 pimStarGITable114
1.2.826.42.1.1578918.5.71.1.1.1.6 pimSGTable128
1.2.826.42.1.1578918.5.71.1.1.1.7 pimSGITable114
1.2.826.42.1.1578918.5.71.1.1.1.8 pimSGRptTable15
1.2.826.42.1.1578918.5.71.1.1.1.9 pimSGRptITable17
1.2.826.42.1.1578918.5.71.1.1.1.11 pimStaticRPTable19
1.2.826.42.1.1578918.5.71.1.1.1.13 pimGroupMappingTable19
1.2.826.42.1.1578918.5.71.1.1.1.14 pimNbrStatsTable118
1.2.826.42.1.1578918.5.71.1.1.1.15 pimIfStatsTable121
1.2.826.42.1.1578918.5.71.1.1.1.16 pimNmEntTable120
1.2.826.42.1.1578918.5.71.1.1.1.17 pimNmEntStatsTable144
1.2.826.42.1.1578918.5.71.1.1.1.18 pimTmEntTable170
1.2.826.42.1.1578918.5.71.1.1.1.19 pimTmMjTable18
1.2.826.42.1.1578918.5.71.1.1.1.20 pimTmSjTable16
1.2.826.42.1.1578918.5.71.1.1.1.21 pimBidirDFElectionTable111
1.2.826.42.1.1578918.5.71.1.1.1.22 pimStaticRPMultiTable112
1.2.826.42.1.1578918.5.71.1.1.1.23 pimGroupAddrMappingTable16
1.2.826.42.1.1578918.5.71.1.1.1.24 pimTmEntStatsTable17