OID reference

dot3adAggActorSystemID

1.2.840.10006.300.43.1.1.1.1.4

Description

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the…

Full description and source information

Identification

Identifier and names

Parent
1.2.840.10006.300.43.1.1.1.1 (dot3adAggEntry)
Node code
4
Node name
dot3adAggActorSystemID
Category
SNMP management object
Numeric OID
1.2.840.10006.300.43.1.1.1.1.4
URN notation
urn:oid:1.2.840.10006.300.43.1.1.1.1.4
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 2 840 10006 300 43 1 1 1 1 4}

  • {iso(1) member-body(2) us(840) ieee802dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) member-body(2) us(840) dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) member-body(2) us(840) ate02dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) member-body(2) us-iso(840) ieee802dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) member-body(2) us-iso(840) dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) member-body(2) us-iso(840) ate02dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us(840) ieee802dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us(840) dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us(840) ate02dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us-iso(840) ieee802dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us-iso(840) dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
  • {iso(1) memberBody(2) us-iso(840) ate02dot3(10006) snmpmibs(300) lagMIB(43) lagMIBObjects(1) dot3adAgg(1) dot3adAggTable(1) dot3adAggEntry(1) dot3adAggActorSystemID(4)}
OID-IRI notation
  • /1/2/840/10006/300/43/1/1/1/1/4
  • /ISO/Member-Body/US/10006/300/43/1/1/1/1/4
  • /ISO/Member-Body/840/10006/300/43/1/1/1/1/4
  • /ISO/2/840/10006/300/43/1/1/1/1/4
Named path variants
  • /iso/member-body/us/ieee802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us/dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us/ate02dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us/802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us-iso/ieee802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us-iso/dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us-iso/ate02dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/member-body/us-iso/802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us/ieee802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us/dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us/ate02dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us/802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us-iso/ieee802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us-iso/dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us-iso/ate02dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID
  • /iso/memberBody/us-iso/802dot3/snmpmibs/lagMIB/lagMIBObjects/dot3adAgg/dot3adAggTable/dot3adAggEntry/dot3adAggActorSystemID

SNMP properties

Value type
MacAddress
Maximum access defined by MIB
read-only, read-write
Status in MIB
current, mandatory

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — D-Link official switch MIBs, Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), and others

Value type
MacAddress
Maximum access defined by MIB
read-only
Status in MIB
current

Variant 2 — IEEE 802

Value type
MacAddress
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 3 — Cisco SMIv1

Value type
MacAddress
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3110-8TFP-R, IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES, IES5220-6S-3ES, S5800-48F4S, S5800-48F4SR, S5800-48T4S.

Show 12 more models

S5800-8TF12S, S5850-24S2Q, S5850-24T16B, S5850-24T16S, S5850-32S2Q, S5850-48S2Q4C, S5850-48S6Q, S5850-48T4Q, S5850-48XMG8C, S8050-20Q4C, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

The Zyxel catalogue lists MIB packages containing this definition for these models:

RGS200-12P.

A definition in a model's MIB package does not establish that the device implements it or permits access.

Available source records contain 13 distinct definitions; some records may not include a definition.

Show 13 published definitions

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
         identifier for the System that contains this Aggregator.
         NOTE: From the perspective of the Link Aggregation mechanisms
               described in Clause 43, only a single combination of Actor’s
               System ID and System Priority are considered, and no
               distinction is made between the values of these parameters
               for an Aggregator and the port(s) that are associated with
               it;, i. e., the protocol is described in terms of the
               operation of aggregation within a single System.
               However, the managed objects provided for the Aggregator and
               the port both allow management of these parameters. The result
               of this is to permit a single piece of equipment to be
               configured by management to contain more than one System
               from the point of view of the operation of Link Aggregation.
               This may be of particular use in the configuration of equipment
               that has limited aggregation capability (see 43.6)."
    REFERENCE
        "IEEE 802.3 Section 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
         identifier for the System that contains this Aggregator.
         NOTE: From the perspective of the Link Aggregation mechanisms
               described in Clause 43, only a single combination of Actor's
               System ID and System Priority are considered, and no
               distinction is made between the values of these parameters
               for an Aggregator and the port(s) that are associated with
               it;, i. e., the protocol is described in terms of the
               operation of aggregation within a single System.
               However, the managed objects provided for the Aggregator and
               the port both allow management of these parameters. The result
               of this is to permit a single piece of equipment to be
               configured by management to contain more than one System
               from the point of view of the operation of Link Aggregation.
               This may be of particular use in the configuration of equipment
               that has limited aggregation capability (see 43.6)."
    REFERENCE
        "IEEE 802.3 Section 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 6, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        can be of particular use in the configuration of
        equipment that has limited aggregation capability (see 6.7)."
    REFERENCE
        "7.3.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
  SYNTAX MacAddress
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "A 6-octet read-write MAC address value used as a unique
    identifier for the System that contains this Aggregator.
    NOTE -- From the perspective of the Link Aggregation mechanisms described
    in Clause 43, only a single combination of Actor's System ID and System
    Priority are considered, and no distinction is made between the values of
    these parameters for an Aggregator and the port(s) that are associated
    with it; i.e., the protocol is described in terms of the operation of
    aggregation within a single System.  However, the managed objects provided
    for the Aggregator and the port both allow management of these parameters.
    The result of this is to permit a single piece of equipment to be
    configured by management to contain more than one System from the point of
    view of the operation of Link Aggregation.  This may be of particular use
    in the configuration of equipment that has limited aggregation capability
    (see 43.6)."
  REFERENCE
   "IEEE 802.3 Subclause 30.7.1.1.4"
::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
  SYNTAX MacAddress
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "A 6-octet read-write MAC address value used as a unique
    identifier for the System that contains this Aggregator.
    NOTE -- From the perspective of the Link Aggregation mechanisms described
    in Clause 43, only a single combination of Actor's System ID and System
    Priority are considered, and no distinction is made between the values of
    these parameters for an Aggregator and the port(s) that are associated
    with it; i.e., the protocol is described in terms of the operation of
    aggregation within a single System.  However, the managed objects provided
    for the Aggregator and the port both allow management of these parameters.
    The result of this is to permit a single piece of equipment to be
    configured by management to contain more than one System from the point of
    view of the operation of Link Aggregation.  This may be of particular use
    in the configuration of equipment that has limited aggregation capability
    (see 43.6)."
  REFERENCE
   "IEEE 802.3 Subclause 30.7.1.1.4"
::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 5, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        may be of particular use in the configuration of
        equipment that has limited aggregation capability (see 5.6)."
    REFERENCE
        "6.3.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.

NOTE¡ªFrom the perspective of the Link Aggregation mechanisms described in Clause 43,
only a single combination of Actor¡¯s System ID and System Priority are considered, and no
distinction is made between the values of these parameters for an Aggregator and the port(s) that
are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
a single System. However, the managed objects provided for the Aggregator and the port both
allow management of these parameters. The result of this is to permit a single piece of equipment
to be configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of equipment
that has limited aggregation capability (see 43.6)."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.4"
::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation mechanisms
        described in Clause , only a single combination of
        Actor's System ID and System Priority are considered, and no
        distinction is made between the values of these parameters
        for an Aggregator and the port(s) that are associated with
        it; i.e., the protocol is described in terms of the operation
        of aggregation within a single System. However, the managed
        objects provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the point of
        view of the operation of Link Aggregation. This may be of
        particular use in the configuration of equipment that has
        limited aggregation capability (see )."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
        ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE—From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3],
        only a single combination of Actor’s System ID and System Priority are considered, and no
        distinction is made between the values of these parameters for an Aggregator and the port(s) that
        are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
        a single System. However, the managed objects provided for the Aggregator and the port both
        allow management of these parameters. The result of this is to permit a single piece of equipment
        to be configured by management to contain more than one System from the point of view of the
        operation of Link Aggregation. This may be of particular use in the configuration of equipment
        that has limited aggregation capability (see 43.6 [Part 3])."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.

        NOTE - From the perspective of the Link Aggregation mechanisms
        described in Clause 43, only a single combination of Actor's
        System ID and System Priority are considered, and no distinction
        is made between the values of these parameters for an Aggregator
        and the port(s) that are associated with it;, i.e., the protocol
        is described in terms of the operation of aggregation within a
        single System. However, the managed objects provided for the
        Aggregator and the port both allow management of these parameters.
        The result of this is to permit a single piece of equipment to
        be configured by management to contain more than one System from
        the point of view of the operation of Link Aggregation. This may
        be of particular use in the configuration of equipment that has
        limited aggregation capability (see 43.6)."
    REFERENCE
        "IEEE 802.3 Section 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.

        NOTE - From the perspective of the Link Aggregation mechanisms
        described in Clause 43, only a single combination of Actor's
        System ID and System Priority are considered, and no distinction
        is made between the values of these parameters for an Aggregator
        and the port(s) that are associated with it;, i.e., the protocol
        is described in terms of the operation of aggregation within a
        single System. However, the managed objects provided for the
        Aggregator and the port both allow management of these parameters.
        The result of this is to permit a single piece of equipment to
        be configured by management to contain more than one System from
        the point of view of the operation of Link Aggregation. This may
        be of particular use in the configuration of equipment that has
        limited aggregation capability (see 43.6)."
    REFERENCE
        "IEEE 802.3 Section 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

dot3adAggActorSystemID · unspecified

3.4.1.5 dot3adAggActorSystemID(1.2.840.10006.300.43.1.1.1.1.4)
定義
システムに対してユニークなシステム ID として使用される MAC アドレスを示す。 MLAG 動作中、かつ mlag lacp‑static‑system‑id コマンド未設定時は、デフォルトで MLAG ド メイン名から生成されたシステム ID を示す。 MLAG 動作中、かつ mlag lacp‑static‑system‑id コマンド設定時は、コマンドで設定したシ ステム ID を示す。
実装
静的 LAG 時は取得不可

dot3adAggActorSystemID · current

dot3adAggActorSystemID OBJECT-TYPE
   SYNTAX MacAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "A 6-octet read-write MAC address value used as a unique
      identifier for the System that contains this Aggregator..

      NOTE:From the perspective of the Link Aggregation mechanisms described in Clause 43,
      only a single combination of Actor's System ID and System Priority are considered, and no
      distinction is made between the values of these parameters for an Aggregator and the port(s) that
      are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within
      a single System. However, the managed objects provided for the Aggregator and the port both
      allow management of these parameters. The result of this is to permit a single piece of equipment
      to be configured by management to contain more than one System from the point of view of the
      operation of Link Aggregation. This may be of particular use in the configuration of equipment
      that has limited aggregation capability (see 43.6)."
   REFERENCE
      "IEEE 802.3 Section 30.7.1.1.4"
::= { dot3adAggEntry 4 }

Meaning

Descriptions

19 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actors System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
Original text from OID Repository
dot3adAggActorSystemID OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "A 6-octet read-write MAC address value used as a unique identifier for the
System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single combination of Actors System ID and
System Priority are considered, and no distinction is made between the values of these
parameters for an Aggregator and the port(s) that are associated with it; i.e., the
protocol is described in terms of the operation of aggregation within a single System.
However, the managed objects provided for the Aggregator and the port both allow management
of these parameters. The result of this is to permit a single piece of equipment to be
configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of
equipment that has limited aggregation capability (see 43.6)."
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.4"
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from a file named S3M_AGENT

Description 2

A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
43.6).
Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Circitor

Parsed from IEEE8023-LAG-MIB.mib · IEEE8023-LAG-MIB

Source file: Download IEEE8023-LAG-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download ieee8023-lag.mib · Publisher's file

Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download stdla.mib · Publisher's file

Source file: Download IEEE8023-LAG-MIB.mib · Publisher's file

Other official packages with the same file

GS724TPv2 MIB V1.1.1.29.zip

FS728TLP_FS526Tv2_FS726Tv2_MIB_File_20140110.zip

FS728TLP_FS526Tv2_FS726Tv2_MIB_File_20140110.zip

Source file: Download IEEE8023-LAG-MIB.mib · Publisher's file

Other official packages with the same file

DXS-3610_A1_MIB_v1.01.zip

MIB.rar

MIB.rar

DXS3400_MIB_20181212.zip

Source file: Download IEEE8023-LAG-MIB.mib · Publisher's file

Other official packages with the same file

DSS-200G-xx_A1_MIB_V1-00-020.7z

DSS-200G-xx_A1_MIB_V1-00-020.7z

DSS-200G-xx_A1_MIB_V1-00-020.7z

DSS-200G-xx_A1_MIB_V1-00-020.7z

Source file: Download 802.3ad.txt · Publisher's file Junos OS Evolved 26.2R1

Other official packages with the same file

Junos OS 26.2R1

Source file: Download IEEE8023-LAG-MIB.my · Publisher's file

Source file: Download ieee802_3ad.mib.txt

Source file: Download LAG-MIB.mib.txt

Source file: Download ieee8023lag.mib.txt

Browse all files from Cisco

Description 3

A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 6, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see 6.7).
Sources for this description

Description 4

A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3],
only a single combination of Actors System ID and System Priority are considered, and no
distinction is made between the values of these parameters for an Aggregator and the port(s) that
are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
a single System. However, the managed objects provided for the Aggregator and the port both
allow management of these parameters. The result of this is to permit a single piece of equipment
to be configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of equipment
that has limited aggregation capability (see 43.6 [Part 3]).
Sources for this description

Description 5

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 6

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 7

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This can be of particular use in the configuration of equipment that has limited aggregation capability (see 6.7).

Sources for this description

IEEE 802

See 1 matching source record

Description 8

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE -- From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)D-Link official switch MIBsLANCOM official release MIBsNETGEAR official product and EOL MIB downloads

See 1 matching source record

Description 9

This object indicates a 6-octet MAC address value used as a unique identifier for the System that contains this Aggregator.

Implementation notes: The returned value of this node is always the global system ID.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 10

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 5, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 5.6).

Sources for this description

D-Link official switch MIBsIEEE 802

See 1 matching source record

Description 11

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE¡ªFrom the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor¡¯s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

FS.COM official Documentation Hub native MIB packages

See 1 matching source record

Description 12

Local system ID.

Sources for this description

H3C official MIB documentation and object descriptions

See 1 matching source record

Description 13

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ).

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 14

This object indicates a 6-octet MAC address value used as a unique identifier for the System that contains this Aggregator.

Implementation notes: The returned value of this node is always the global system ID, irrespective of whether Eth-Trunk interfaces are E-Trunk member interfaces.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 15

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE—From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3], only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6 [Part 3]).

Sources for this description

D-Link official switch MIBsHPE Instant On official MIBsNETGEAR official product and EOL MIB downloads

See 1 matching source record

Description 16

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE - From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBsFS.COM official Documentation Hub native MIB packagesMIBdepotZyxel official Download Library MIBs

See 1 matching source record

Description 17

This object indicates a 6-octet MAC address value used as a unique identifier for the System that contains this Aggregator.

Implementation notes: If Eth-Trunk interfaces are E-Trunk member interfaces, the returned value of this node is the configured E-Trunk system ID.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 18

Definition: システムに対してユニークなシステム ID として使用される MAC アドレスを示す。 MLAG 動作中、かつ mlag lacp‑static‑system‑id コマンド未設定時は、デフォルトで MLAG ド メイン名から生成されたシステム ID を示す。 MLAG 動作中、かつ mlag lacp‑static‑system‑id コマンド設定時は、コマンドで設定したシ ステム ID を示す。 AEOS 8.45 implementation: 静的 LAG 時は取得不可

Sources for this description

APRESIA AEOS 8.45 official MIB implementation manual

See 1 matching source record

Description 19

A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.. NOTE:From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).

Sources for this description

MIBdepot

See 1 matching source record

Evidence

Source records

17 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 5D-Link official switch MIBs1 record · 2 sources

Description 5

dot3adAggActorSystemID · currentD-Link official switch MIBs2 sources

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Section 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Section 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 6Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 6

dot3adAggActorSystemID · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Section 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE: From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i. e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Section 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 7IEEE 8021 record · 1 source

Description 7

dot3adAggActorSystemID · currentIEEE 8021 source

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This can be of particular use in the configuration of equipment that has limited aggregation capability (see 6.7).\"",
    "REFERENCE",
    "\"7.3.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This can be of particular use in the configuration of equipment that has limited aggregation capability (see 6.7)."
    ],
    [
      "REFERENCE",
      "7.3.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 8Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), D-Link official switch MIBs, and others1 record · 14 sources

Description 8

dot3adAggActorSystemID · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), D-Link official switch MIBs, and others14 sources

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE -- From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Subclause 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE -- From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Subclause 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}

Browse all 14 supporting sources

Records for description 9, 14, 17Huawei official enterprise MIB Query and object descriptions4 records · 4 sources

Description 9 · Description 14 · Description 17

dot3adAggActorSystemID · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
dot3adAggActorSystemID · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
dot3adAggActorSystemID · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: dot3adAggActorSystemID

Technical details
{
  "syntax": "MacAddress",
  "max_access": "read-only",
  "object_class": "table column",
  "implementation_notes": "The returned value of this node is always the global system ID, irrespective of whether Eth-Trunk interfaces are E-Trunk member interfaces."
}
dot3adAggActorSystemID · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: dot3adAggActorSystemID

Technical details
{
  "syntax": "MacAddress",
  "max_access": "read-only",
  "object_class": "table column",
  "implementation_notes": "If Eth-Trunk interfaces are E-Trunk member interfaces, the returned value of this node is the configured E-Trunk system ID."
}
Records for description 10D-Link official switch MIBs, IEEE 8021 record · 2 sources

Description 10

dot3adAggActorSystemID · currentD-Link official switch MIBs, IEEE 8022 sources

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 5, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 5.6).\"",
    "REFERENCE",
    "\"6.3.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 5, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 5.6)."
    ],
    [
      "REFERENCE",
      "6.3.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 2Huawei official enterprise MIB Query and object descriptions1 record · 1 source
Records for description 11FS.COM official Documentation Hub native MIB packages1 record · 1 source

Description 11

dot3adAggActorSystemID · currentFS.COM official Documentation Hub native MIB packages1 source

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE¡ªFrom the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor¡¯s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Subclause 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE¡ªFrom the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor¡¯s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Subclause 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 12H3C official MIB documentation and object descriptions1 record · 36 sources

Description 12

dot3adAggActorSystemID · unspecifiedH3C official MIB documentation and object descriptions36 sources

Status in source: unspecified.

Names: dot3adAggActorSystemID

Technical details
{}

Browse all 36 supporting sources

Records for description 13D-Link official switch MIBs1 record · 1 source

Description 13

dot3adAggActorSystemID · currentD-Link official switch MIBs1 source

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see ).\"",
    "REFERENCE",
    "\"IEEE 802.3 Subclause 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause , only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see )."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Subclause 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 15D-Link official switch MIBs, HPE Instant On official MIBs, and others1 record · 4 sources

Description 15

dot3adAggActorSystemID · currentD-Link official switch MIBs, HPE Instant On official MIBs, and others4 sources

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE—From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3], only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6 [Part 3]).\"",
    "REFERENCE",
    "\"IEEE 802.3 Subclause 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE—From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3], only a single combination of Actor’s System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6 [Part 3])."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Subclause 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 16Belden, GarrettCom and Hirschmann IT official standalone MIBs, FS.COM official Documentation Hub native MIB packages, and others1 record · 4 sources

Description 16

dot3adAggActorSystemID · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs, FS.COM official Documentation Hub native MIB packages, and others4 sources

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE - From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Section 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE - From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Section 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
Records for description 18APRESIA AEOS 8.45 official MIB implementation manual1 record · 1 source

Description 18

dot3adAggActorSystemID · unspecifiedAPRESIA AEOS 8.45 official MIB implementation manual1 source

Status in source: unspecified.

Names: dot3adAggActorSystemID

Technical details
{
  "definition": [
    "3",
    ".",
    "4",
    ".",
    "1",
    ".",
    "5",
    "dot3adAggActorSystemID",
    "(",
    "1",
    ".",
    "2",
    ".",
    "840",
    ".",
    "10006",
    ".",
    "300",
    ".",
    "43",
    ".",
    "1",
    ".",
    "1",
    ".",
    "1",
    ".",
    "1",
    ".",
    "4",
    ")",
    "定",
    "義",
    "シ",
    "ス",
    "テ",
    "ム",
    "に",
    "対",
    "し",
    "て",
    "ユ",
    "ニ",
    "ー",
    "ク",
    "な",
    "シ",
    "ス",
    "テ",
    "ム",
    "ID",
    "と",
    "し",
    "て",
    "使",
    "用",
    "さ",
    "れ",
    "る",
    "MAC",
    "ア",
    "ド",
    "レ",
    "ス",
    "を",
    "示",
    "す",
    "。",
    "MLAG",
    "動",
    "作",
    "中",
    "、",
    "か",
    "つ",
    "mlag",
    "lacp",
    "‑",
    "static",
    "‑",
    "system",
    "‑",
    "id",
    "コ",
    "マ",
    "ン",
    "ド",
    "未",
    "設",
    "定",
    "時",
    "は",
    "、",
    "デ",
    "フ",
    "ォ",
    "ル",
    "ト",
    "で",
    "MLAG",
    "ド",
    "メ",
    "イ",
    "ン",
    "名",
    "か",
    "ら",
    "生",
    "成",
    "さ",
    "れ",
    "た",
    "シ",
    "ス",
    "テ",
    "ム",
    "ID",
    "を",
    "示",
    "す",
    "。",
    "MLAG",
    "動",
    "作",
    "中",
    "、",
    "か",
    "つ",
    "mlag",
    "lacp",
    "‑",
    "static",
    "‑",
    "system",
    "‑",
    "id",
    "コ",
    "マ",
    "ン",
    "ド",
    "設",
    "定",
    "時",
    "は",
    "、",
    "コ",
    "マ",
    "ン",
    "ド",
    "で",
    "設",
    "定",
    "し",
    "た",
    "シ",
    "ス",
    "テ",
    "ム",
    "ID",
    "を",
    "示",
    "す",
    "。",
    "実",
    "装",
    "静",
    "的",
    "LAG",
    "時",
    "は",
    "取",
    "得",
    "不",
    "可"
  ]
}
Records for description 19MIBdepot1 record · 1 source

Description 19

dot3adAggActorSystemID · currentMIBdepot1 source

Status in source: current.

Names: dot3adAggActorSystemID

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3adAggActorSystemID",
    "OBJECT-TYPE",
    "SYNTAX",
    "MacAddress",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.. NOTE:From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).\"",
    "REFERENCE",
    "\"IEEE 802.3 Section 30.7.1.1.4\"",
    "::=",
    "{",
    "dot3adAggEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "MacAddress"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.. NOTE:From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it;, i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)."
    ],
    [
      "REFERENCE",
      "IEEE 802.3 Section 30.7.1.1.4"
    ],
    null,
    null,
    null
  ]
}
  • Preserved mibdepot archive

    Module: LAG-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'TEXTUAL-CONVENTION', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['PortList']}
    · Download LAG-MIB.txt

Historical records

Additional source information

Information from Cisco SMIv1
dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX MacAddress

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 43, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        may be of particular use in the configuration of
        equipment that has limited aggregation capability (see
        43.6)."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }
Information from Cisco
dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 43, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        may be of particular use in the configuration of
        equipment that has limited aggregation capability (see
        43.6)."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }
Information from IEEE 802
dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 6, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        may be of particular use in the configuration of
        equipment that has limited aggregation capability (see 6.7)."
    REFERENCE
        "7.3.1.1.4"
    ::= { dot3adAggEntry 4 }
Information from MIBdepot
dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE From the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3],
        only a single combination of Actors System ID and System Priority are considered, and no
        distinction is made between the values of these parameters for an Aggregator and the port(s) that
        are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
        a single System. However, the managed objects provided for the Aggregator and the port both
        allow management of these parameters. The result of this is to permit a single piece of equipment
        to be configured by management to contain more than one System from the point of view of the
        operation of Link Aggregation. This may be of particular use in the configuration of equipment
        that has limited aggregation capability (see 43.6 [Part 3])."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }
Information from Circitor
dot3adAggActorSystemID OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 6-octet read-write MAC address value used as a unique
        identifier for the System that contains this Aggregator.
        NOTE-From the perspective of the Link Aggregation
        mechanisms described in Clause 43, only a single
        combination of Actor's System ID and System Priority are
        considered, and no distinction is made between the
        values of these parameters for an Aggregator and the
        port(s) that are associated with it; i.e., the protocol
        is described in terms of the operation of aggregation
        within a single System. However, the managed objects
        provided for the Aggregator and the port both allow
        management of these parameters. The result of this is to
        permit a single piece of equipment to be configured by
        management to contain more than one System from the
        point of view of the operation of Link Aggregation. This
        may be of particular use in the configuration of
        equipment that has limited aggregation capability (see
        43.6)."
    REFERENCE
        "IEEE 802.3 Subclause 30.7.1.1.4"
    ::= { dot3adAggEntry 4 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.2.840.10006)

IEEE 802.3 Working Group

Current Registration Authority (inferred from ancestor 1.2.840)

Joyce Hsu

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.2.840.10006.300.43.1.1.1.1.1 dot3adAggIndex00 The unique identifier allocated to this Aggregator by
the local System. This attribute identifies an
Aggregator instance among t…
1.2.840.10006.300.43.1.1.1.1.2 dot3adAggMACAddress00 A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator.
1.2.840.10006.300.43.1.1.1.1.3 dot3adAggActorSystemPriority00 A 2-octet read-write value indicating the priority
value associated with the Actor's System ID.
1.2.840.10006.300.43.1.1.1.1.5 dot3adAggAggregateOrIndividual00 A read-only Boolean value indicating whether the
Aggregator represents an Aggregate (`TRUE') or
an Individual link (`FALSE').
1.2.840.10006.300.43.1.1.1.1.6 dot3adAggActorAdminKey00 The current administrative value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key …
1.2.840.10006.300.43.1.1.1.1.7 dot3adAggActorOperKey00 The current operational value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key val…
1.2.840.10006.300.43.1.1.1.1.8 dot3adAggPartnerSystemID00 A 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of
this Aggregator. A …
1.2.840.10006.300.43.1.1.1.1.9 dot3adAggPartnerSystemPriority00 A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manual…
1.2.840.10006.300.43.1.1.1.1.10 dot3adAggPartnerOperKey00 The current operational value of the Key for the
Aggregator's current protocol Partner. This is a 16-bit
read-only value. If the …
1.2.840.10006.300.43.1.1.1.1.11 dot3adAggCollectorMaxDelay00 The value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that may be
imposed by the Fram…