OID reference

dot3PauseAdminMode

1.3.111.2.802.3.1.10.1.10.1.1

Description

This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If Auto-Negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines th…

Full description and source information

Identification

Identifier and names

Parent
1.3.111.2.802.3.1.10.1.10.1 (dot3PauseEntry)
Node code
1
Node name
dot3PauseAdminMode
Category
SNMP management object
Numeric OID
1.3.111.2.802.3.1.10.1.10.1.1
URN notation
urn:oid:1.3.111.2.802.3.1.10.1.10.1.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 111 2 802 3 1 10 1 10 1 1}

  • {iso(1) identified-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) identified-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) org(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) org(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) iso-identified-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) iso-identified-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) iso-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
  • {iso(1) iso-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023etherMIB(10) ieee8023etherMIBObjects(1) dot3PauseTable(10) dot3PauseEntry(1) dot3PauseAdminMode(1)}
OID-IRI notation
  • /1/3/111/2/802/3/1/10/1/10/1/1
  • /ISO/Identified-Organization/111/2/802/3/1/10/1/10/1/1
  • /ISO/3/111/2/802/3/1/10/1/10/1/1
Named path variants
  • /iso/identified-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/identified-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/org/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/org/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/iso-identified-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/iso-identified-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/iso-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode
  • /iso/iso-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023etherMIB/ieee8023etherMIBObjects/dot3PauseTable/dot3PauseEntry/dot3PauseAdminMode

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

ValueName
1disabled
2enabledXmit
3enabledRcv
4enabledXmitAndRcv

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: dot3StatsIndex.

snmpwalk [connection options] DEVICE .1.3.111.2.802.3.1.10.1.10.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

The displayed source records contain one distinct definition. Compare its source records.

dot3PauseAdminMode OBJECT-TYPE
           SYNTAX      INTEGER {
                           disabled(1),
                           enabledXmit(2),
                           enabledRcv(3),
                           enabledXmitAndRcv(4)
                       }

           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION "This object is used to configure the default
                       administrative PAUSE mode for this interface.

                       This object represents the
                       administratively-configured PAUSE mode for this
                       interface. If Auto-Negotiation is not enabled
                       or is not implemented for the active MAU
                       attached to this interface, the value of this
                       object determines the operational PAUSE mode
                       of the interface whenever it is operating in
                       full-duplex mode. In this case, a set to this
                       object will force the interface into the
                       specified mode.

                       If Auto-Negotiation is implemented and enabled
                       for the MAU attached to this interface, the
                       PAUSE mode for this interface is determined by
                       Auto-Negotiation, and the value of this object
                       denotes the mode to which the interface will
                       automatically revert if/when Auto-Negotiation is
                       later disabled. Note that when Auto-Negotiation
                       is running, administrative control of the PAUSE
                       mode may be accomplished using the
                       ifMauAutoNegCapAdvertisedBits object in the
                       MAU-MIB module.

                       Note that the value of this object is ignored
                       when the interface is not operating in
                       full-duplex mode.

                       An attempt to set this object to
                       'enabledXmit(2)' or 'enabledRcv(3)' will fail
                       on interfaces that do not support operation
                       at greater than 100 Mb/s."
           ::= { dot3PauseEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If Auto-Negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If Auto-Negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by Auto-Negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when Auto-Negotiation is later disabled. Note that when Auto-Negotiation is running, administrative control of the PAUSE mode may be accomplished using the ifMauAutoNegCapAdvertisedBits object in the MAU-MIB module. Note that the value of this object is ignored when the interface is not operating in full-duplex mode. An attempt to set this object to 'enabledXmit(2)' or 'enabledRcv(3)' will fail on interfaces that do not support operation at greater than 100 Mb/s.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBsNETGEAR official product and EOL MIB downloads

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), HPE Instant On official MIBs, and others1 record · 3 sources

Description 1

dot3PauseAdminMode · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), HPE Instant On official MIBs, and others3 sources

Status in source: current.

Names: dot3PauseAdminMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dot3PauseAdminMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "disabled",
    "(",
    "1",
    ")",
    ",",
    "enabledXmit",
    "(",
    "2",
    ")",
    ",",
    "enabledRcv",
    "(",
    "3",
    ")",
    ",",
    "enabledXmitAndRcv",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If Auto-Negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If Auto-Negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by Auto-Negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when Auto-Negotiation is later disabled. Note that when Auto-Negotiation is running, administrative control of the PAUSE mode may be accomplished using the ifMauAutoNegCapAdvertisedBits object in the MAU-MIB module. Note that the value of this object is ignored when the interface is not operating in full-duplex mode. An attempt to set this object to 'enabledXmit(2)' or 'enabledRcv(3)' will fail on interfaces that do not support operation at greater than 100 Mb/s.\"",
    "::=",
    "{",
    "dot3PauseEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "disabled",
            1
          ],
          [
            "enabledXmit",
            2
          ],
          [
            "enabledRcv",
            3
          ],
          [
            "enabledXmitAndRcv",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to configure the default administrative PAUSE mode for this interface. This object represents the administratively-configured PAUSE mode for this interface. If Auto-Negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode. If Auto-Negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by Auto-Negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when Auto-Negotiation is later disabled. Note that when Auto-Negotiation is running, administrative control of the PAUSE mode may be accomplished using the ifMauAutoNegCapAdvertisedBits object in the MAU-MIB module. Note that the value of this object is ignored when the interface is not operating in full-duplex mode. An attempt to set this object to 'enabledXmit(2)' or 'enabledRcv(3)' will fail on interfaces that do not support operation at greater than 100 Mb/s."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

Current Registration Authority (inferred from ancestor 1.3)

Frank Farance

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.111.2.802.3.1.10.1.10.1.2 dot3PauseOperMode00
1.3.111.2.802.3.1.10.1.10.1.3 dot3InPauseFrames00
1.3.111.2.802.3.1.10.1.10.1.4 dot3OutPauseFrames00
1.3.111.2.802.3.1.10.1.10.1.5 dot3HCInPauseFrames00
1.3.111.2.802.3.1.10.1.10.1.6 dot3HCOutPauseFrames00