Status in source: current.
Technical details
{
"smi_kind": "MODULE-COMPLIANCE",
"definition": [
"dot3Compliance2",
"MODULE-COMPLIANCE",
"STATUS",
"current",
"DESCRIPTION",
"\"The compliance statement for managed network entities which have Ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (IETF RFC 2863). In addition, compliance with this MIB module requires compliance with the mauModIfCompl3 MODULE-COMPLIANCE statement of the MAU-MIB module defined in Clause 13.\"",
"MODULE",
"MANDATORY-GROUPS",
"{",
"etherStatsBaseGroup2",
"}",
"GROUP",
"etherDuplexGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating in full-duplex mode. It is highly recommended for all Ethernet-like network interfaces.\"",
"GROUP",
"etherRateControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating at speeds faster than 1000 Mb/s. It is highly recommended for all Ethernet-like network interfaces.\"",
"GROUP",
"etherStatsLowSpeedGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating at 10 Mb/s or slower in half-duplex mode.\"",
"GROUP",
"etherStatsHighSpeedGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating at 100 Mb/s or faster.\"",
"GROUP",
"etherStatsHalfDuplexGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating in half-duplex mode.\"",
"GROUP",
"etherHCStatsGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces which are capable of operating at 10 Gb/s or faster. It is recommended for all Ethernet-like network interfaces which are capable of operating at 1000 Mb/s or faster.\"",
"GROUP",
"etherControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that support the MAC Control sublayer.\"",
"GROUP",
"etherHCControlGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that support the MAC Control sublayer and are capable of operating at 10 Gb/s or faster.\"",
"GROUP",
"etherControlPauseGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that support the MAC Control PAUSE function.\"",
"GROUP",
"etherHCControlPauseGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that support the MAC Control PAUSE function and are capable of operating at 10 Gb/s or faster.\"",
"GROUP",
"etherCollisionTableGroup",
"DESCRIPTION",
"\"This group is optional. It is appropriate for all Ethernet-like network interfaces which are capable of operating in half-duplex mode and have the necessary metering. Implementation in systems with such interfaces is highly recommended.\"",
"GROUP",
"etherHCStatsLpiGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that support the Low Power Idle function.\"",
"GROUP",
"etherSlowProtocolsGroup",
"DESCRIPTION",
"\"This group is optional. It is appropriate for Ethernet-like network interfaces that implement OAM as defined in Clause 57 of IEEE Std 802.3.\"",
"GROUP",
"etherExtensionMacCtrlGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that implement Extension MAC Control.\"",
"GROUP",
"etherPfcGroup",
"DESCRIPTION",
"\"This group is mandatory for all Ethernet-like network interfaces that implement Priority Flow Control.\"",
"::=",
"{",
"etherCompliances",
"1",
"}"
],
"syntax_tree": [
[
"Status",
"current"
],
[
"DESCRIPTION",
"The compliance statement for managed network entities which have Ethernet-like network interfaces. Note that compliance with this MIB module requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (IETF RFC 2863). In addition, compliance with this MIB module requires compliance with the mauModIfCompl3 MODULE-COMPLIANCE statement of the MAU-MIB module defined in Clause 13."
],
null,
[
"ComplianceModules",
[
[
null,
[
"etherStatsBaseGroup2",
"etherDuplexGroup",
"etherRateControlGroup",
"etherStatsLowSpeedGroup",
"etherStatsHighSpeedGroup",
"etherStatsHalfDuplexGroup",
"etherHCStatsGroup",
"etherControlGroup",
"etherHCControlGroup",
"etherControlPauseGroup",
"etherHCControlPauseGroup",
"etherCollisionTableGroup",
"etherHCStatsLpiGroup",
"etherSlowProtocolsGroup",
"etherExtensionMacCtrlGroup",
"etherPfcGroup"
]
]
]
]
]
}