OID reference

rpMauStatus

1.3.111.2.802.3.1.13.1.1.1.1.5

Description

The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state oth…

Full description and source information

Identification

Identifier and names

Parent
1.3.111.2.802.3.1.13.1.1.1.1 (rpMauEntry)
Node code
5
Node name
rpMauStatus
Category
SNMP management object
Numeric OID
1.3.111.2.802.3.1.13.1.1.1.1.5
URN notation
urn:oid:1.3.111.2.802.3.1.13.1.1.1.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 111 2 802 3 1 13 1 1 1 1 5}

  • {iso(1) identified-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) identified-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) org(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) org(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) iso-identified-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) iso-identified-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) iso-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
  • {iso(1) iso-organization(3) ieee(111) standards-association-numbers-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) ieee8023mauMIB(13) ieee8023snmpDot3MauMgt(1) dot3RpMauBasicGroup(1) rpMauTable(1) rpMauEntry(1) rpMauStatus(5)}
OID-IRI notation
  • /1/3/111/2/802/3/1/13/1/1/1/1/5
  • /ISO/Identified-Organization/111/2/802/3/1/13/1/1/1/1/5
  • /ISO/3/111/2/802/3/1/13/1/1/1/1/5
Named path variants
  • /iso/identified-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/identified-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/org/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/org/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/iso-identified-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/iso-identified-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/iso-organization/ieee/standards-association-numbered-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus
  • /iso/iso-organization/ieee/standards-association-numbers-series-standards/lan-man-stds/ieee802dot3/ieee802dot3dot1mibs/ieee8023mauMIB/ieee8023snmpDot3MauMgt/dot3RpMauBasicGroup/rpMauTable/rpMauEntry/rpMauStatus

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

ValueName
1other
2unknown
3operational
4standby
5shutdown
6reset

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In IEEE8023-MAU-MIB, the row index consists of these components in order:

  1. rpMauGroupIndex (Integer32): one numeric subidentifier for the non-negative value.
  2. rpMauPortIndex (Integer32): one numeric subidentifier for the non-negative value.
  3. rpMauIndex (Integer32): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.111.2.802.3.1.13.1.1.1.1.5.<rpMauGroupIndex>.<rpMauPortIndex>.<rpMauIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.111.2.802.3.1.13.1.1.1.1.5

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

The displayed source records contain one distinct definition. Compare its source records.

rpMauStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                      other(1),
                      unknown(2),
                      operational(3),
                      standby(4),
                      shutdown(5),
                      reset(6)
                  }
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION "The current state of the MAU. This object may
                  be implemented as a read-only object by those
                  agents and MAUs that do not implement software
                  control of the MAU state. Some agents may not
                  support setting the value of this object to some
                  of the enumerated values.

                  The value other(1) is returned if the MAU is in
                  a state other than one of the states 2 through
                  6.
                  The value unknown(2) is returned when the MAU's
                  true state is unknown; for example, when it is
                  being initialized.

                  A MAU in the operational(3) state is fully
                  functional; it operates, and passes signals to its
                  attached DTE or repeater port in accordance to
                  its specification.

                  A MAU in standby(4) state forces DI and CI to
                  idle, and the media transmitter to idle or fault,
                  if supported. Standby(4) mode only applies to
                  link type MAUs. The state of
                  rpMauMediaAvailable is unaffected.

                  A MAU in shutdown(5) state assumes the same
                  condition on DI, CI, and the media transmitter,
                  as though it were powered down or not connected.
                  The MAU may return other(1) value for the
                  rpMauJabberState and rpMauMediaAvailable objects
                  when it is in this state. For an AUI, this
                  state will remove power from the AUI.

                  Setting this variable to the value reset(6)
                  resets the MAU in the same manner as a
                  power-off, power-on cycle of at least one-half
                  second would. The agent is not required to
                  return the value reset(6).

                  Setting this variable to the value
                  operational(3), standby(4), or shutdown(5)
                  causes the MAU to assume the respective state,
                  except that setting a mixing-type MAU or an AUI
                  to standby(4) will cause the MAU to enter the
                  shutdown state."
      REFERENCE   "IEEE Std 802.3, 30.5.1.1.7, aMAUAdminState,
                  30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
                  acResetMAU."
      ::= { rpMauEntry 5 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU\s true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU may return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.
Original text from OID Repository
rpMauStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(2),
operational(3),
standby(4),
shutdown(5),
reset(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current state of the MAU. This object may
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents may not
support setting the value of this object to some
of the enumerated values.
The value other(1) is returned if the MAU is in
a state other than one of the states 2 through
6.
The value unknown(2) is returned when the MAU\s
true state is unknown; for example, when it is
being initialized.
A MAU in the operational(3) state is fully
functional; it operates, and passes signals to its
attached DTE or repeater port in accordance to
its specification.
A MAU in standby(4) state forces DI and CI to
idle, and the media transmitter to idle or fault,
if supported. Standby(4) mode only applies to
link type MAUs. The state of
rpMauMediaAvailable is unaffected.
A MAU in shutdown(5) state assumes the same
condition on DI, CI, and the media transmitter,
as though it were powered down or not connected.
The MAU may return other(1) value for the
rpMauJabberState and rpMauMediaAvailable objects
when it is in this state. For an AUI, this
state will remove power from the AUI.
Setting this variable to the value reset(6)
resets the MAU in the same manner as a
power-off, power-on cycle of at least one-half
second would. The agent is not required to
return the value reset(6).
Setting this variable to the value
operational(3), standby(4), or shutdown(5)
causes the MAU to assume the respective state,
except that setting a mixing-type MAU or an AUI
to standby(4) will cause the MAU to enter the
shutdown state."
REFERENCE "IEEE Std 802.3, 30.5.1.1.7, aMAUAdminState,
30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,
acResetMAU."
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from IEEE Management Information Bases (MIBs).

Description 2

The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU may return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBsNETGEAR official product and EOL MIB downloads

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), HPE Instant On official MIBs, and others1 record · 4 sources

Description 2

rpMauStatus · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), HPE Instant On official MIBs, and others4 sources

Status in source: current.

Names: rpMauStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rpMauStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "unknown",
    "(",
    "2",
    ")",
    ",",
    "operational",
    "(",
    "3",
    ")",
    ",",
    "standby",
    "(",
    "4",
    ")",
    ",",
    "shutdown",
    "(",
    "5",
    ")",
    ",",
    "reset",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU may return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.\"",
    "REFERENCE",
    "\"IEEE Std 802.3, 30.5.1.1.7, aMAUAdminState, 30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1, acResetMAU.\"",
    "::=",
    "{",
    "rpMauEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "unknown",
            2
          ],
          [
            "operational",
            3
          ],
          [
            "standby",
            4
          ],
          [
            "shutdown",
            5
          ],
          [
            "reset",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU may return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state."
    ],
    [
      "REFERENCE",
      "IEEE Std 802.3, 30.5.1.1.7, aMAUAdminState, 30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1, acResetMAU."
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

Current Registration Authority (inferred from ancestor 1.3)

Frank Farance

Siblings (9)

OIDNameDirect childrenDescendantsDescription
1.3.111.2.802.3.1.13.1.1.1.1.1 rpMauGroupIndex00
1.3.111.2.802.3.1.13.1.1.1.1.2 rpMauPortIndex00 This variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is co…
1.3.111.2.802.3.1.13.1.1.1.1.3 rpMauIndex00 This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same port (rpMauPortIn…
1.3.111.2.802.3.1.13.1.1.1.1.4 rpMauType00 This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB m…
1.3.111.2.802.3.1.13.1.1.1.1.6 rpMauMediaAvailable00 This object identifies Media Available state of the MAU, complementary to the rpMauStatus. Values for the standard IEEE 802.3 M…
1.3.111.2.802.3.1.13.1.1.1.1.7 rpMauMediaAvailableStateExits00 A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in…
1.3.111.2.802.3.1.13.1.1.1.1.8 rpMauJabberState00 The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent shall return other(1) for MAU type dot3MauTypeA…
1.3.111.2.802.3.1.13.1.1.1.1.9 rpMauJabberingStateEnters00 A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). For MAUs of type dot3Ma…
1.3.111.2.802.3.1.13.1.1.1.1.10 rpMauFalseCarriers00 A count of the number of false carrier events during IDLE in 100BASE-X links. This counter does not increment at the symbol rat…