| 1.3.111.2.802.3.1.13.1.2.1.1.1 |
ifMauIfIndex | 0 | 0 |
|
| 1.3.111.2.802.3.1.13.1.2.1.1.2 |
ifMauIndex | 0 | 0 |
This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (ifMauI… |
| 1.3.111.2.802.3.1.13.1.2.1.1.3 |
ifMauType | 0 | 0 |
This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB m… |
| 1.3.111.2.802.3.1.13.1.2.1.1.4 |
ifMauStatus | 0 | 0 |
The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not impleme… |
| 1.3.111.2.802.3.1.13.1.2.1.1.5 |
ifMauMediaAvailable | 0 | 0 |
This object identifies Media Available state of the MAU, complementary to the ifMauStatus. Values for the standard IEEE 802.3 M… |
| 1.3.111.2.802.3.1.13.1.2.1.1.6 |
ifMauMediaAvailableStateExits | 0 | 0 |
A count of the number of times that ifMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in… |
| 1.3.111.2.802.3.1.13.1.2.1.1.7 |
ifMauJabberState | 0 | 0 |
The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent shall return other(1) for MAU type dot3MauTypeA… |
| 1.3.111.2.802.3.1.13.1.2.1.1.8 |
ifMauJabberingStateEnters | 0 | 0 |
A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). This counter will indic… |
| 1.3.111.2.802.3.1.13.1.2.1.1.9 |
ifMauFalseCarriers | 0 | 0 |
A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this coun… |
| 1.3.111.2.802.3.1.13.1.2.1.1.10 |
ifMauDefaultType | 0 | 0 |
This object identifies the default administrative baseband MAU type to be used in conjunction with the operational MAU type den… |
| 1.3.111.2.802.3.1.13.1.2.1.1.11 |
ifMauAutoNegSupported | 0 | 0 |
This object indicates whether or not Auto-Negotiation is supported on this MAU. |
| 1.3.111.2.802.3.1.13.1.2.1.1.12 |
ifMauTypeListBits | 0 | 0 |
A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. If Auto-Negotiation is present on … |
| 1.3.111.2.802.3.1.13.1.2.1.1.13 |
ifMauHCFalseCarriers | 0 | 0 |
A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this coun… |
| 1.3.111.2.802.3.1.13.1.2.1.1.14 |
ifMauPCSCodingViolations | 0 | 0 |
Generalized nonresettable counter. This counter has a maximum increment rate of 25 000 000 counts per second for 100 Mb/s imple… |
| 1.3.111.2.802.3.1.13.1.2.1.1.15 |
ifMauFECAbility | 0 | 0 |
A read-only value that indicates if the PHY supports an optional FEC sublayer for forward error correction (see IEEE Std 802.3,… |
| 1.3.111.2.802.3.1.13.1.2.1.1.16 |
ifMauFECMode | 0 | 0 |
A read-write value that indicates the mode of operation of the optional FEC sublayer for forward error correction (see IEEE Std… |
| 1.3.111.2.802.3.1.13.1.2.1.1.17 |
ifMauFECCorrectedBlocks | 0 | 0 |
********** THIS OBJECT IS DEPRECATED ********** Generalized nonresettable counter. This counter has a maximum increment rate of… |
| 1.3.111.2.802.3.1.13.1.2.1.1.18 |
ifMauFECUnCorrectableBlocks | 0 | 0 |
********** THIS OBJECT IS DEPRECATED ********** Generalized nonresettable counter. This counter has a maximum increment rate of… |
| 1.3.111.2.802.3.1.13.1.2.1.1.19 |
ifMauSNROpMarginChnlA | 0 | 0 |
The current SNR operating margin measured at the slicer input for channel A for the 10GBASE-T PMA. It is reported in units of 0… |
| 1.3.111.2.802.3.1.13.1.2.1.1.20 |
ifMauSNROpMarginChnlB | 0 | 0 |
The current SNR operating margin measured at the slicer input for channel B for the 10GBASE-T PMA. It is reported in units of 0… |
| 1.3.111.2.802.3.1.13.1.2.1.1.21 |
ifMauSNROpMarginChnlC | 0 | 0 |
The current SNR operating margin measured at the slicer input for channel C for the 10GBASE-T PMA. It is reported in units of 0… |
| 1.3.111.2.802.3.1.13.1.2.1.1.22 |
ifMauSNROpMarginChnlD | 0 | 0 |
The current SNR operating margin measured at the slicer input for channel D for the 10GBASE-T PMA. It is reported in units of 0… |
| 1.3.111.2.802.3.1.13.1.2.1.1.23 |
ifMauEEESupportList | 0 | 0 |
A read-only list of the possible PHY types for which the underlying system supports Energy-Efficient Ethernet (EEE) as defined … |
| 1.3.111.2.802.3.1.13.1.2.1.1.24 |
ifMauEEELDFastRetrainCount | 0 | 0 |
A count of the number of 10GBASE-T fast retrains initiated by the local device. The indication reflects the state of the PHY ev… |
| 1.3.111.2.802.3.1.13.1.2.1.1.25 |
ifMauEEELPFastRetrainCount | 0 | 0 |
A count of the number of 10GBASE-T fast retrains initiated by the link partner. The indication reflects the state of the PHY ev… |
| 1.3.111.2.802.3.1.13.1.2.1.1.26 |
ifMauTimeSyncCapabilityTX | 0 | 0 |
This object indicates whether or not transmit Time Sync is supported on this MAU. |
| 1.3.111.2.802.3.1.13.1.2.1.1.27 |
ifMauTimeSyncCapabilityRX | 0 | 0 |
This object indicates whether or not receive Time Sync is supported on this MAU. |
| 1.3.111.2.802.3.1.13.1.2.1.1.28 |
ifMauTimeSyncDelayTXmax | 0 | 0 |
The maximum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Inter… |
| 1.3.111.2.802.3.1.13.1.2.1.1.30 |
ifMauTimeSyncDelayRXmax | 0 | 0 |
The maximum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Inter… |
| 1.3.111.2.802.3.1.13.1.2.1.1.31 |
ifMauTimeSyncDelayRXmin | 0 | 0 |
The minimum data delay as specified in IEEE Std 802.3 90.7, expressed in units of ns. If an IEEE Std 802.3 Clause 45 MDIO Inter… |