| 1.3.6.1.2.1.10.246.1.2.1.1 |
pwIndex | 0 | 0 |
A unique index for the conceptual row identifying a PW within this table. |
| 1.3.6.1.2.1.10.246.1.2.1.2 |
pwType | 0 | 0 |
This value indicates the emulated service to be carried over this PW. |
| 1.3.6.1.2.1.10.246.1.2.1.3 |
pwOwner | 0 | 0 |
This object is set by the operator to indicate the protocol responsible for establishing this PW. \manual\ is used in all cases… |
| 1.3.6.1.2.1.10.246.1.2.1.4 |
pwPsnType | 0 | 0 |
This object is set by the operator to indicate the PSN type. Based on this object, the relevant PSN table\s entry is created in… |
| 1.3.6.1.2.1.10.246.1.2.1.5 |
pwSetUpPriority | 0 | 0 |
This object defines the relative priority of the PW during set-up in a lowest-to-highest fashion, where 0 is the highest priori… |
| 1.3.6.1.2.1.10.246.1.2.1.6 |
pwHoldingPriority | 0 | 0 |
This object defines the relative holding priority of the PW in a lowest-to-highest fashion, where 0 is the highest priority. PW… |
| 1.3.6.1.2.1.10.246.1.2.1.8 |
pwPeerAddrType | 0 | 0 |
Denotes the address type of the peer node. It should be set to \unknown\ if PE/PW maintenance protocol is not used and the addr… |
| 1.3.6.1.2.1.10.246.1.2.1.9 |
pwPeerAddr | 0 | 0 |
This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a … |
| 1.3.6.1.2.1.10.246.1.2.1.10 |
pwAttachedPwIndex | 0 | 0 |
If the PW is attached to another PW instead of a local native service, this item indicates the pwIndex of the attached PW. Othe… |
| 1.3.6.1.2.1.10.246.1.2.1.11 |
pwIfIndex | 0 | 0 |
This object indicates the ifIndex of the PW if the PW is represented in the iftable. Otherwise, it MUST be set to zero. |
| 1.3.6.1.2.1.10.246.1.2.1.12 |
pwID | 0 | 0 |
Pseudowire identifier. If the pwOwner object is \pwIdFecSignaling\ or \l2tpControlProtocol\, then this object is signaled in th… |
| 1.3.6.1.2.1.10.246.1.2.1.13 |
pwLocalGroupID | 0 | 0 |
Used in the Group ID field sent to the peer PW End Service within the maintenance protocol used for PW setup. It SHOULD be set … |
| 1.3.6.1.2.1.10.246.1.2.1.14 |
pwGroupAttachmentID | 0 | 0 |
This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically iden… |
| 1.3.6.1.2.1.10.246.1.2.1.15 |
pwLocalAttachmentID | 0 | 0 |
This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. I… |
| 1.3.6.1.2.1.10.246.1.2.1.16 |
pwRemoteAttachmentID | 0 | 0 |
This object is an octet string representing the remote forwarder attachment individual identifier (AII) to be used by this PW. … |
| 1.3.6.1.2.1.10.246.1.2.1.17 |
pwCwPreference | 0 | 0 |
Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of a control word, a… |
| 1.3.6.1.2.1.10.246.1.2.1.18 |
pwLocalIfMtu | 0 | 0 |
If not equal to zero, the optional IfMtu object in the signaling protocol will be sent with this value, which represents the lo… |
| 1.3.6.1.2.1.10.246.1.2.1.19 |
pwLocalIfString | 0 | 0 |
A PW MAY be associated to an interface (or a virtual interface) in the iftable of the node as part of the service configuration… |
| 1.3.6.1.2.1.10.246.1.2.1.20 |
pwLocalCapabAdvert | 0 | 0 |
If a maintenance protocol is used, it indicates the capabilities the local node will advertise to the peer. The operator MAY se… |
| 1.3.6.1.2.1.10.246.1.2.1.21 |
pwRemoteGroupID | 0 | 0 |
This object is obtained from the Group ID field as received via the maintenance protocol used for PW setup. Value of zero will … |
| 1.3.6.1.2.1.10.246.1.2.1.22 |
pwCwStatus | 0 | 0 |
If signaling is used for PW establishment, this object indicates the status of the control word negotiation. For either signali… |
| 1.3.6.1.2.1.10.246.1.2.1.23 |
pwRemoteIfMtu | 0 | 0 |
The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. The object SHOULD report z… |
| 1.3.6.1.2.1.10.246.1.2.1.24 |
pwRemoteIfString | 0 | 0 |
Indicates the interface description string as received by the maintenance protocol. It MUST be a NULL string if a maintenance p… |
| 1.3.6.1.2.1.10.246.1.2.1.25 |
pwRemoteCapabilities | 0 | 0 |
Indicates the capabilities as received from the peer. |
| 1.3.6.1.2.1.10.246.1.2.1.26 |
pwFragmentCfgSize | 0 | 0 |
If set to a value other than zero, indicates that fragmentation is desired for this PW. This object MAY be changed only if the … |
| 1.3.6.1.2.1.10.246.1.2.1.27 |
pwRmtFragCapability | 0 | 0 |
The status of the fragmentation based on the local configuration and the peer capabilities as received from the peer when a con… |
| 1.3.6.1.2.1.10.246.1.2.1.28 |
pwFcsRetentionCfg | 0 | 0 |
The local configuration of Frame Check Sequence (FCS) retention for this PW. FCS retention can be configured for PW types High-… |
| 1.3.6.1.2.1.10.246.1.2.1.29 |
pwFcsRetentionStatus | 0 | 0 |
The status of the FCS retention negotiation process based on local configuration and the remote advertisement. remoteIndication… |
| 1.3.6.1.2.1.10.246.1.2.1.31 |
pwInboundLabel | 0 | 0 |
The PW label used in the inbound direction (i.e., packets received from the PSN). It may be set manually if pwOwner is \manual\… |
| 1.3.6.1.2.1.10.246.1.2.1.32 |
pwName | 0 | 0 |
The canonical name assigned to the PW. This object MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.33 |
pwDescr | 0 | 0 |
A textual string containing information about the PW. If there is no description, this object contains a zero- length string. T… |
| 1.3.6.1.2.1.10.246.1.2.1.34 |
pwCreateTime | 0 | 0 |
The value of sysUpTime at the time this PW was created. |
| 1.3.6.1.2.1.10.246.1.2.1.35 |
pwUpTime | 0 | 0 |
Specifies the time since last change of pwOperStatus to Up(1). |
| 1.3.6.1.2.1.10.246.1.2.1.36 |
pwLastChange | 0 | 0 |
The value of sysUpTime at the time the PW entered its current operational state. If the current state was entered prior to the … |
| 1.3.6.1.2.1.10.246.1.2.1.37 |
pwAdminStatus | 0 | 0 |
The desired operational status of this PW. This object MAY be set at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.38 |
pwOperStatus | 0 | 0 |
This object indicates the operational status of the PW; it does not reflect the status of the Customer Edge (CE) bound interfac… |
| 1.3.6.1.2.1.10.246.1.2.1.39 |
pwLocalStatus | 0 | 0 |
Indicates the status of the PW in the local node. The various indications in this object SHOULD be available independent of the… |
| 1.3.6.1.2.1.10.246.1.2.1.40 |
pwRemoteStatusCapable | 0 | 0 |
Indicates the remote node capability to advertise the PW status notification. notApplicable SHOULD be reported for a manually s… |
| 1.3.6.1.2.1.10.246.1.2.1.41 |
pwRemoteStatus | 0 | 0 |
Indicates the status of the PW as was advertised by the remote. If the remote is not capable of advertising the status object, … |
| 1.3.6.1.2.1.10.246.1.2.1.42 |
pwTimeElapsed | 0 | 0 |
The number of seconds, including partial seconds, that have elapsed since the beginning of the current interval measurement per… |
| 1.3.6.1.2.1.10.246.1.2.1.43 |
pwValidIntervals | 0 | 0 |
The number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.2.1.10.246.1.2.1.44 |
pwRowStatus | 0 | 0 |
For creating, modifying, and deleting this row. This object MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.45 |
pwStorageType | 0 | 0 |
This variable indicates the storage type for this object. |
| 1.3.6.1.2.1.10.246.1.2.1.46 |
pwOamEnable | 0 | 0 |
This variable indicates if OAM is enabled for this PW. It MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.47 |
pwGenAGIType | 0 | 0 |
This variable indicates the AGI type if generalized FEC (129) is used for PW signaling or configuration. It SHOULD return the v… |
| 1.3.6.1.2.1.10.246.1.2.1.48 |
pwGenLocalAIIType | 0 | 0 |
This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC … |
| 1.3.6.1.2.1.10.246.1.2.1.49 |
pwGenRemoteAIIType | 0 | 0 |
This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC… |