| 1.3.6.1.2.1.10.251.1.5.1.2.1.1 |
xdsl2LConfProfProfileName | 0 | 0 |
This object identifies a row in this table. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.2 |
xdsl2LConfProfScMaskDs | 0 | 0 |
Subcarrier mask. A bitmap of 4096 bits that allows masking up to 4096 downstream subcarriers. If bit i (0 <= i < NSCds) is set … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.3 |
xdsl2LConfProfScMaskUs | 0 | 0 |
Subcarrier mask. A bitmap of 4096 bits that allows masking up to 4096 upstream subcarriers. If bit i (0 <= i < NSCus) is set to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.4 |
xdsl2LConfProfVdsl2CarMask | 0 | 0 |
VDSL2-specific subcarrier mask. This configuration parameter defines the restrictions, additional to the band plan, to determine… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.5 |
xdsl2LConfProfRfiBands | 0 | 0 |
For ITU-T Recommendation G.992.5, this configuration parameter defines the subset of downstream PSD mask breakpoints, as specifie… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.6 |
xdsl2LConfProfRaModeDs | 0 | 0 |
The mode of operation of a rate-adaptive xTU-C in the transmit direction. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.7 |
xdsl2LConfProfRaModeUs | 0 | 0 |
The mode of operation of a rate-adaptive xTU-R in the transmit direction. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.8 |
xdsl2LConfProfRaUsNrmDs | 0 | 0 |
The Downstream Up-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the downstream nois… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.9 |
xdsl2LConfProfRaUsNrmUs | 0 | 0 |
The Upstream Up-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream noise ma… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.10 |
xdsl2LConfProfRaUsTimeDs | 0 | 0 |
The Downstream Up-Shift Time Interval, to be used when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of time that t… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.11 |
xdsl2LConfProfRaUsTimeUs | 0 | 0 |
The Upstream Up-Shift Time Interval, to be used when xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of time the upst… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.12 |
xdsl2LConfProfRaDsNrmDs | 0 | 0 |
The Downstream Down-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. If the downstream no… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.13 |
xdsl2LConfProfRaDsNrmUs | 0 | 0 |
The Upstream Downshift Noise Margin value, to be used when xdsl2LConfProfRaModeUs is set to 'dynamicRa'. If the upstream noise m… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.14 |
xdsl2LConfProfRaDsTimeDs | 0 | 0 |
The Downstream Downshift Time Interval, to be used when xdsl2LConfProfRaModeDs is set to 'dynamicRa'. The interval of time the d… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.15 |
xdsl2LConfProfRaDsTimeUs | 0 | 0 |
The Upstream Down-Shift Time Interval, to be used when xdsl2LConfProfRaModeUs is set to 'dynamicRa'. The interval of time the up… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.16 |
xdsl2LConfProfTargetSnrmDs | 0 | 0 |
The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer chan… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.17 |
xdsl2LConfProfTargetSnrmUs | 0 | 0 |
The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channe… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.18 |
xdsl2LConfProfMaxSnrmDs | 0 | 0 |
The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall reque… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.19 |
xdsl2LConfProfMaxSnrmUs | 0 | 0 |
The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall reque… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.20 |
xdsl2LConfProfMinSnrmDs | 0 | 0 |
The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request t… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.21 |
xdsl2LConfProfMinSnrmUs | 0 | 0 |
The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request t… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.22 |
xdsl2LConfProfMsgMinUs | 0 | 0 |
Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in up… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.23 |
xdsl2LConfProfMsgMinDs | 0 | 0 |
Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.24 |
xdsl2LConfProfCeFlag | 0 | 0 |
This parameter is a bit that enables the use of the optional cyclic extension values. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.25 |
xdsl2LConfProfSnrModeDs | 0 | 0 |
This parameter enables the transmitter-referred virtual noise in the downstream direction. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.26 |
xdsl2LConfProfSnrModeUs | 0 | 0 |
This parameter enables the transmitter-referred virtual noise in the upstream direction. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.27 |
xdsl2LConfProfTxRefVnDs | 0 | 0 |
This configuration parameter defines the downstream transmitter-referred virtual noise. The TXREFVNds shall be specified through … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.28 |
xdsl2LConfProfTxRefVnUs | 0 | 0 |
This configuration parameter defines the upstream transmitter-referred virtual noise. The TXREFVNus shall be specified through a … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.29 |
xdsl2LConfProfXtuTransSysEna | 0 | 0 |
xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bitmap … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.30 |
xdsl2LConfProfPmMode | 0 | 0 |
Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this lin… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.31 |
xdsl2LConfProfL0Time | 0 | 0 |
The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 sec… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.32 |
xdsl2LConfProfL2Time | 0 | 0 |
The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecu… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.33 |
xdsl2LConfProfL2Atpr | 0 | 0 |
The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.34 |
xdsl2LConfProfL2Atprt | 0 | 0 |
The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reduct… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.36 |
xdsl2LConfProfDpboEPsd | 0 | 0 |
This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.37 |
xdsl2LConfProfDpboEsEL | 0 | 0 |
This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange-based DSL servic… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.38 |
xdsl2LConfProfDpboEsCableModelA | 0 | 0 |
The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.39 |
xdsl2LConfProfDpboEsCableModelB | 0 | 0 |
The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.40 |
xdsl2LConfProfDpboEsCableModelC | 0 | 0 |
The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange-based DSL services to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.41 |
xdsl2LConfProfDpboMus | 0 | 0 |
This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange-based services, used to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.42 |
xdsl2LConfProfDpboFMin | 0 | 0 |
This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as … |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.43 |
xdsl2LConfProfDpboFMax | 0 | 0 |
This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.44 |
xdsl2LConfProfUpboKL | 0 | 0 |
This configuration parameter defines the electrical length expressed in dB at 1 MHz, kl0, configured by the CO-MIB. The value ran… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.45 |
xdsl2LConfProfUpboKLF | 0 | 0 |
Defines the upstream power backoff force mode. |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.46 |
xdsl2LConfProfUs0Mask | 0 | 0 |
The configuration parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only def… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.47 |
xdsl2LConfProfForceInp | 0 | 0 |
This parameter, when set to 'true' indicates that the framer settings of the bearer shall be selected such that the impulse noise… |
| 1.3.6.1.2.1.10.251.1.5.1.2.1.48 |
xdsl2LConfProfRowStatus | 0 | 0 |
This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting t… |