| 1.3.6.1.2.1.10.251.1.5.1.3.1.1 |
xdsl2LConfProfXdslMode | 0 | 0 |
The DSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.2 |
xdsl2LConfProfMaxNomPsdDs | 0 | 0 |
The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 uni… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.3 |
xdsl2LConfProfMaxNomPsdUs | 0 | 0 |
The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.4 |
xdsl2LConfProfMaxNomAtpDs | 0 | 0 |
The maximum nominal aggregate to transmit power in the downstream direction during initialization and Showtime. It ranges from 0… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.5 |
xdsl2LConfProfMaxNomAtpUs | 0 | 0 |
The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 2… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.6 |
xdsl2LConfProfMaxAggRxPwrUs | 0 | 0 |
The maximum upstream aggregate receive power over the relevant set of subcarriers. The xTU-C should verify that the upstream pow… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.7 |
xdsl2LConfProfPsdMaskDs | 0 | 0 |
The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD rest… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.8 |
xdsl2LConfProfPsdMaskUs | 0 | 0 |
The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5, and it may impose PSD restr… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.9 |
xdsl2LConfProfPsdMaskSelectUs | 0 | 0 |
The selected upstream PSD mask. This parameter is used only for Annexes J and M of G.992.3 and G.992.5, and the same selection i… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.10 |
xdsl2LConfProfClassMask | 0 | 0 |
In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped … |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.11 |
xdsl2LConfProfLimitMask | 0 | 0 |
This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on … |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.12 |
xdsl2LConfProfUs0Disable | 0 | 0 |
This configuration parameter indicates if the use of the US0 is disabled for each limit PSD mask enabled in the xdsl2LConfProfLim… |
| 1.3.6.1.2.1.10.251.1.5.1.3.1.13 |
xdsl2LConfProfModeSpecRowStatus | 0 | 0 |
This object is used to create a new row or to modify or delete an existing row in this table.
This row is activated by setting th… |