| 1.3.6.1.2.1.10.251.1.5.2.1.1.1 |
xdsl2ChConfProfProfileName | 0 | 0 |
This object identifies a row in this table. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.2 |
xdsl2ChConfProfMinDataRateDs | 0 | 0 |
Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.3 |
xdsl2ChConfProfMinDataRateUs | 0 | 0 |
Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.4 |
xdsl2ChConfProfMinResDataRateDs | 0 | 0 |
Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. … |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.5 |
xdsl2ChConfProfMinResDataRateUs | 0 | 0 |
Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. Th… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.6 |
xdsl2ChConfProfMaxDataRateDs | 0 | 0 |
Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.7 |
xdsl2ChConfProfMaxDataRateUs | 0 | 0 |
Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.8 |
xdsl2ChConfProfMinDataRateLowPwrDs | 0 | 0 |
This parameter specifies the minimum net data rate for the bearer channel as desired by the operator of the system during the low… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.9 |
xdsl2ChConfProfMinDataRateLowPwrUs | 0 | 0 |
This parameter specifies the minimum net data rate for the bearer channel as desired by the operator of the system during the low… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.10 |
xdsl2ChConfProfMaxDelayDs | 0 | 0 |
Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream … |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.11 |
xdsl2ChConfProfMaxDelayUs | 0 | 0 |
Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream dire… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.12 |
xdsl2ChConfProfMinProtectionDs | 0 | 0 |
This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.13 |
xdsl2ChConfProfMinProtectionUs | 0 | 0 |
This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.14 |
xdsl2ChConfProfMinProtection8Ds | 0 | 0 |
This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.15 |
xdsl2ChConfProfMinProtection8Us | 0 | 0 |
This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.16 |
xdsl2ChConfProfMaxBerDs | 0 | 0 |
Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.17 |
xdsl2ChConfProfMaxBerUs | 0 | 0 |
Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.18 |
xdsl2ChConfProfUsDataRateDs | 0 | 0 |
Data Rate Threshold Upshift for Downstream direction. An 'Up-Shift rate change' event is triggered when the actual downstream da… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.19 |
xdsl2ChConfProfDsDataRateDs | 0 | 0 |
Data Rate Threshold Downshift for Downstream direction. A 'Down-Shift rate change' event is triggered when the actual downstream… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.20 |
xdsl2ChConfProfUsDataRateUs | 0 | 0 |
Data Rate Threshold Upshift for Upstream direction. An 'Up-Shift rate change' event is triggered when the actual upstream data r… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.21 |
xdsl2ChConfProfDsDataRateUs | 0 | 0 |
Data Rate Threshold Downshift for Upstream direction. A 'Down-Shift rate change' event is triggered when the actual upstream dat… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.22 |
xdsl2ChConfProfImaEnabled | 0 | 0 |
IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data… |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.24 |
xdsl2ChConfProfInitPolicy | 0 | 0 |
Channel Initialization Policy Selection (CIPOLICY). This optional parameter indicates which policy shall be applied to determine … |
| 1.3.6.1.2.1.10.251.1.5.2.1.1.25 |
xdsl2ChConfProfRowStatus | 0 | 0 |
This object is used to create a new row or to modify or delete an existing row in this table.
A profile is activated by setting t… |