informational purpose only.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.2.1.10.32.2.1.42
Type of routing entry. This field is intended for informational purpose only.
Identification
{1 3 6 1 2 1 10 32 2 1 42}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | local | 1, 2 |
| 2 | switch | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In RFC1315-MIB, the row index consists of these components in order:
frCircuitIfIndex (INTEGER): one numeric subidentifier for the non-negative value.frCircuitDlci (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.2.1.10.32.2.1.42.<frCircuitIfIndex>.<frCircuitDlci>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.2.1.10.32.2.1.42
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
frCircuitRouteType OBJECT-TYPE
SYNTAX INTEGER {
local(1), switch(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of routing entry. This field is intended for
informational purpose only."
DEFVAL { local }
::= { frCircuitEntry 42 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: frCircuitRouteType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"frCircuitRouteType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"local",
"(",
"1",
")",
",",
"switch",
"(",
"2",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Type of routing entry. This field is intended for informational purpose only.\"",
"DEFVAL",
"{",
"local",
"}",
"::=",
"{",
"frCircuitEntry",
"42",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"local",
1
],
[
"switch",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Type of routing entry. This field is intended for informational purpose only."
],
null,
null,
null,
[
"DEFVAL",
"local"
]
]
}Vendor MIB copy from the Observium Community archive.
Module: RFC1315-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['Counter', 'TimeTicks'], 'RFC1213-MIB': ['transmission']}Related source files and packages:
Historical records
frCircuitRouteType OBJECT-TYPE
SYNTAX INTEGER {
local(1), switch(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type of routing entry. This field is intended for
informational purpose only."
::= { frCircuitEntry 42 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.32.2.1.1 | frCircuitIfIndex | 0 | 0 | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.2.1.10.32.2.1.2 | frCircuitDlci | 0 | 0 | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.2.1.10.32.2.1.3 | frCircuitState | 0 | 0 | Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interf… |
| 1.3.6.1.2.1.10.32.2.1.4 | frCircuitReceivedFECNs | 0 | 0 | Number of frames received from the network in- dicating forward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.5 | frCircuitReceivedBECNs | 0 | 0 | Number of frames received from the network in- dicating backward congestion since the virtual circuit was created. |
| 1.3.6.1.2.1.10.32.2.1.6 | frCircuitSentFrames | 0 | 0 | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.7 | frCircuitSentOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.8 | frCircuitReceivedFrames | 0 | 0 | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.9 | frCircuitReceivedOctets | 0 | 0 | Number of octets received over this virtual circuit since it was created. |
| 1.3.6.1.2.1.10.32.2.1.10 | frCircuitCreationTime | 0 | 0 | The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or … |
| 1.3.6.1.2.1.10.32.2.1.11 | frCircuitLastTimeChange | 0 | 0 | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.2.1.10.32.2.1.12 | frCircuitCommittedBurst | 0 | 0 | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions,… |
| 1.3.6.1.2.1.10.32.2.1.13 | frCircuitExcessBurst | 0 | 0 | This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurem… |
| 1.3.6.1.2.1.10.32.2.1.14 | frCircuitThroughput | 0 | 0 | Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network inter… |
| 1.3.6.1.2.1.10.32.2.1.15 | frCircuitMulticast | 0 | 0 | This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to |
| 1.3.6.1.2.1.10.32.2.1.16 | frCircuitType | 0 | 0 | Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management… |
| 1.3.6.1.2.1.10.32.2.1.17 | frCircuitDiscards | 0 | 0 | The number of inbound frames dropped because of format errors, or because the VC is inactive. |
| 1.3.6.1.2.1.10.32.2.1.18 | frCircuitReceivedDEs | 0 | 0 | Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. … |
| 1.3.6.1.2.1.10.32.2.1.19 | frCircuitSentDEs | 0 | 0 | Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This… |
| 1.3.6.1.2.1.10.32.2.1.20 | frCircuitLogicalIfIndex | 0 | 0 | Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of… |
| 1.3.6.1.2.1.10.32.2.1.21 | frCircuitRowStatus | 0 | 0 | This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the Row… |
| 1.3.6.1.2.1.10.32.2.1.43 | frCircuitRouteIfIndex | 0 | 0 | The destination IfIndex is a pointer to either a second frame relay interface (frame relay switching) or to a frame relay virtual… |
| 1.3.6.1.2.1.10.32.2.1.44 | frCircuitRouteDlci | 1 | 1 | The destination DLCI. When the circuit is used for switching, all packets are sent using this DLCI. This field is void for multip… |