Count of the line initialization failed attempts during the interval.
Sources for this description
Huawei MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.2.1.10.94.1.1.8.1.65535
Count of the line initialization failed attempts during the interval.
Identification
{1 3 6 1 2 1 10 94 1 1 8 1 65535}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
hwAdslAtucIntervalFailFullInits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization failed attempts during the interval."
::= { adslAtucIntervalEntry 65535 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Count of the line initialization failed attempts during the interval.
Huawei MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hwAdslAtucIntervalFailFullInits
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwAdslAtucIntervalFailFullInits",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Count of the line initialization failed attempts during the interval.\"",
"::=",
"{",
"adslAtucIntervalEntry",
"65535",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Count of the line initialization failed attempts during the interval."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Huawei support.
Module: HUAWEI-ADSL-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'ifType'], 'SNMPv2-TC': ['RowStatus', 'PhysAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Unsigned32', 'Gauge32', 'Counter32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY'], 'ADSL-LINE-MIB': ['adslLineMib', 'adslMibObjects', 'adslLineConfProfileEntry', 'adslLineConfProfileName', 'adslLineEntry', 'adslAturChanEntry', 'adslAtucChanEntry', 'adslAtucChanPerfDataEntry', 'adslAturChanPerfDataEntry', 'adslAtucChanIntervalEntry', 'adslAturChanIntervalEntry', 'adslTraps', 'adslAturPhysEntry', 'adslAtucPhysEntry', 'adslAtucPerfDataEntry', 'adslAtucIntervalEntry', 'adslLineAlarmConfProfileEntry'], 'HUAWEI-TC-MIB': ['hwAlarmId', 'hwAlarmTime', 'hwAlarmSn', 'hwCauseId', 'hwTrapType'], 'HWMUSA-DEV-MIB': ['hwIasConfigChangeTrapID'], 'PerfHist-TC-MIB': ['PerfIntervalCount'], 'ADSL-LINE-EXT-MIB': ['adslLineExtEntry'], 'ADSL2-LINE-TC-MIB': ['Adsl2TransmissionModeType', 'Adsl2SymbolProtection', 'Adsl2PsdMaskDs', 'Adsl2PsdMaskUs'], 'HUAWEI-DEVICE-MIB': ['hwFrameIndex', 'hwSlotIndex', 'hwSubslotIndex', 'hwPortIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.94.1.1.8.1.1 | adslAtucIntervalNumber | 0 | 0 | SYNTAX INTEGER(1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number 1 is the the most … |
| 1.3.6.1.2.1.10.94.1.1.8.1.2 | adslAtucIntervalLofs | 0 | 0 | SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when… |
| 1.3.6.1.2.1.10.94.1.1.8.1.3 | adslAtucIntervalLoss | 0 | 0 | SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when… |
| 1.3.6.1.2.1.10.94.1.1.8.1.4 | adslAtucIntervalLols | 0 | 0 | SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when… |
| 1.3.6.1.2.1.10.94.1.1.8.1.5 | adslAtucIntervalLprs | 0 | 0 | SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when… |
| 1.3.6.1.2.1.10.94.1.1.8.1.6 | adslAtucIntervalESs | 0 | 0 | SYNTAX PerfIntervalCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the inter… |
| 1.3.6.1.2.1.10.94.1.1.8.1.7 | adslAtucIntervalInits | 0 | 0 | SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts during the … |
| 1.3.6.1.2.1.10.94.1.1.8.1.8 | adslAtucIntervalValidData | 0 | 0 | SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is val… |