OID reference

addressMapSource

1.3.6.1.2.1.16.13.5.1.3

Description

The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [3,5], for the desired interface. For example, if an entry were to receive data from interface #1, this…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.2.1.16.13.5.1 (addressMapEntry)
Node code
3
Node name
addressMapSource
Category
SNMP management object
Numeric OID
1.3.6.1.2.1.16.13.5.1.3
URN notation
urn:oid:1.3.6.1.2.1.16.13.5.1.3
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 2 1 16 13 5 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) rmon(16) addressMap(13) addressMapTable(5) addressMapEntry(1) addressMapSource(3)}
OID-IRI notation
  • /1/3/6/1/2/1/16/13/5/1/3
  • /ISO/Identified-Organization/6/1/2/1/16/13/5/1/3
  • /ISO/3/6/1/2/1/16/13/5/1/3
Named path variants
  • /iso/identified-organization/dod/internet/mgmt/mib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/identified-organization/dod/internet/mgmt/mib/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/org/dod/internet/mgmt/mib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/org/dod/internet/mgmt/mib/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/org/dod/internet/mgmt/stdmib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-identified-organization/dod/internet/mgmt/stdmib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-organization/dod/internet/mgmt/mib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-organization/dod/internet/mgmt/mib/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource
  • /iso/iso-organization/dod/internet/mgmt/stdmib-2/rmon/addressMap/addressMapTable/addressMapEntry/addressMapSource

SNMP properties

Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
not-accessible
Status in MIB
current, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — MIBdepot, Belden, GarrettCom and Hirschmann IT official standalone MIBs, and others

Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
not-accessible
Status in MIB
current

Variant 2 — Cisco SMIv1

Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
not-accessible
Status in MIB
mandatory

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: addressMapTimeMark, protocolDirLocalIndex, addressMapNetworkAddress, addressMapSource.

A query example is omitted because the source variants do not establish compatible read access.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3100-16TM, IES3100-8T4F-P, IES3100-8TF, IES3100-8TF-P, IES3110-8TFP-R, IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES.

Show 48 more models

IES5220-6S-3ES, N5580-32C, N5580-48Y8C, N5850-48S6Q, N5860-48SC, N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF, S3150-8T2FP, S3400-24T4FP, S3400-24T4SP, S3400-48T4SP, S3400-48T6SP, S3410-24TS-P, S3910-24TS, S3910-48TS, S5500-48T6SP-R, S5800-48F4S, S5800-48F4SR, S5800-48T4S, S5800-8TF12S, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5850-24S2Q, S5850-24T16B, S5850-24T16S, S5850-32S2Q, S5850-48S2Q4C, S5850-48S6Q, S5850-48T4Q, S5850-48XMG8C, S5860-20SQ, S5860-24XB-U, S5860-48SC, S8050-20Q4C, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

The Zyxel catalogue lists MIB packages containing this definition for these models:

RGS200-12P.

A definition in a model's MIB package does not establish that the device implements it or permits access.

Available source records contain 3 distinct definitions; some records may not include a definition.

Show 3 published definitions

addressMapSource · current

addressMapSource OBJECT-TYPE
      SYNTAX      OBJECT IDENTIFIER
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION "The interface or port on which the associated network address was most recently 
         seen.
        If this address mapping was discovered on an interface, this object 
        shall identify the instance of the ifIndex object, defined in [3,5], 
        for the desired interface. For example, if an entry were to receive 
        data from interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this object shall 
        identify the instance of the rptrGroupPortIndex object, defined in [RFC1
        516], for the desired port. For example, if an entry were to receive 
        data from group #1, port #1, this object would be set to 
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry may only 
        point to index objects, this object may at times point to repeater port 
        objects. This situation occurs when the dataSource points to an 
        interface which is a locally attached repeater and the agent has 
        additional information about the source port of traffic seen on that 
        repeater."
      ::= {addressMapEntry 3}

addressMapSource · current

addressMapSource OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.

        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [RFC 2863], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC 2108], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects.  This situation occurs when
        the dataSource points to an interface that is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }

addressMapSource · current

addressMapSource OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.

        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [17], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC2108], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects. This situation occurs when
        the dataSource points to an interface which is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }

Meaning

Descriptions

5 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [3,5], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC1516], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.
Original text from OID Repository
addressMapSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface or port on which the associated network
address was most recently seen.
If this address mapping was discovered on an interface, this
object shall identify the instance of the ifIndex
object, defined in [3,5], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.
If this address mapping was discovered on a port, this
object shall identify the instance of the rptrGroupPortIndex
object, defined in [RFC1516], for the desired port.
For example, if an entry were to receive data from
group #1, port #1, this object would be set to
rptrGroupPortIndex.1.1.
Note that while the dataSource associated with this entry
may only point to index objects, this object may at times
point to repeater port objects. This situation occurs when
the dataSource points to an interface which is a locally
attached repeater and the agent has additional information
about the source port of traffic seen on that repeater."
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from RFC2021

Circitor

Parsed from RMON2-MIB.mib · RMON2-MIB

Source file: Download RMON2-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download RMON2.mib · Publisher's file

Other official packages with the same file

s5850-and-s8050-series-switches-snmp-mib-files.zip

s5800-8tf12s-switch-snmp-mib-files.zip

s5800-48t4s-switch-snmp-mib-files.zip

s5800-48f4sr-switch-snmp-mib-files.zip

Source file: Download RMON2-MIB-2021.mib · Publisher's file

Other official packages with the same file

s3100-16tf-switch-snmp-mib-files.zip

s5860-series-swithes-snmp-mib-files.zip

s3910-series-swithes-snmp-mib-files.zip

s3410-series-swithes-snmp-mib-files.zip

Source file: Download S5500-48T6SP-R Switch SNMP MIB Files.rar!RMON2-MIB.my · Publisher's file

Other official packages with the same file

s3150-8t2fp-switch-snmp-mib-files.zip

ies3100-series-switches-snmp-mib-files.zip

n-series-switches-fsos-snmp-mib-files.zip

202305060956260ayqlm.zip

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

M4250H-v13.0.4.14-mibs.zip

M4250H-v13.0.4.13-mibs.zip

M4250L-v13.0.4.14-mibs.zip

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

XS508TM_XS516TM-v7.8.11.13-Mibs.zip

M4350-v14.0.9.10-mibs.zip

M4350-v14.0.6.9-mibs.zip

M4350-v14.0.6.19-mibs.zip

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

GS348T-v1.0.0.43-Mibs.zip

GS324Tx_Mibs.zip

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

GS348T-v1.0.0.38-mibs.zip

GS348T-v1.0.0.33-mibs.zip

GS348T-v1.0.0.26-mibs.zip

GS348T-v1.0.0.17-mibs.zip

Source file: Download RMON2-MIB.my · Publisher's file

Other official packages with the same file

mibs-m4500-48xf8c-7.0.5.6.tar.bz2

mibs-m4500-48xf8c-7.0.4.30.tar.bz2

mibs-m4500-48xf8c-7.0.4.23.tar.bz2

mibs-m4500-48xf8c-7.0.4.18.tar.bz2

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

xs7xxt_6.6.3.2-mibs.zip

xs712t-v6.1.0.36-mibs.zip

xs712t-v6.1.0.34-mibs.zip

xs7xxt6.6.3.3-mibs.zip

Source file: Download rmon2.my · Publisher's file

Other official packages with the same file

xs7xxtv7.0.0.24-mibs.zip

xs7xxtv7.0.0.20-mibs.zip

s3300v6.6.4.26-mibs.zip

s3300v6.6.4.25-mibs.zip

Browse all files from Cisco

Description 2

The interface or port on which the associated network
address was most recently seen.

If this address mapping was discovered on an interface, this
object shall identify the instance of the ifIndex
object, defined in [RFC2863], for the desired interface.
For example, if an entry were to receive data from
interface #1, this object would be set to ifIndex.1.

If this address mapping was discovered on a port, this
object shall identify the instance of the rptrGroupPortIndex
object, defined in [RFC2108], for the desired port.
For example, if an entry were to receive data from
group #1, port #1, this object would be set to
rptrGroupPortIndex.1.1.

Note that while the dataSource associated with this entry
may only point to index objects, this object may at times
point to repeater port objects. This situation occurs when
the dataSource points to an interface that is a locally
attached repeater and the agent has additional information
about the source port of traffic seen on that repeater.
Sources for this description

MIBdepot

Source file: Download RMON2-MIB.txt · Publisher's file

Vendor MIB copy from the Netdisco archive.

Source file: Download RMON2-MIB · Publisher's file

Vendor MIB copy from the LibreNMS archive.

Source file: Download rfc4502-rmon2.mib · Publisher's file

Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download RMON2-MIB.txt · Publisher's file

Other official packages with the same file

MS510TXM_TXUP_V1.1.1.9_MIBs.zip

MS510TXM_TXUP_V1.1.1.8_MIBs.zip

MS510TXM_TXUP_V1.1.1.11_MIBs.zip

MS510TXM_TXUP_V1.1.0.8_MIBs.zip

Source file: Download RMON2-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive.

Related source files and packages:

Source file: Download RMON2-MIB.mib · Publisher's file

Other official packages with the same file

MIB.rar

MIB.rar

DXS-1210-R1.00-MIB-20200515.7z

DXS-1210-R1.00-MIB-20200515.7z

Source file: Download RMON2-MIB.mib · Publisher's file

Other official packages with the same file

DES-3810_Series_A1_MIB_of_FW_v2.20.010.zip

DES-3810_Series_A1_MIB_of_FW_v2.20.010.zip

Source file: Download rfc4502.txt · Publisher's file Junos OS Evolved 26.2R1

Other official packages with the same file

Junos OS 26.2R1

Source file: Download RFC 4502 · Publisher's file · RFC errata

Source file: Download RMON2-MIB.mib.txt

Browse all files from MIBdepot

Description 3

The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [3,5], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC1 516], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.

Sources for this description

MIBdepot

See 1 matching source record

Description 4

The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC 2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC 2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBs

See 1 matching source record

Description 5

The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBsFS.COM official Documentation Hub native MIB packagesZyxel official Download Library MIBs

See 1 matching source record

Evidence

Source records

3 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3MIBdepot1 record · 1 source

Description 3

addressMapSource · currentMIBdepot1 source

Status in source: current.

Names: addressMapSource

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "addressMapSource",
    "OBJECT-TYPE",
    "SYNTAX",
    "OBJECT",
    "IDENTIFIER",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [3,5], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC1 516], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.\"",
    "::=",
    "{",
    "addressMapEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "OBJECT IDENTIFIER",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [3,5], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC1 516], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Preserved mibdepot archive

    Module: RMON2-MIB

    See published definition above

    Module imports
    {'RMON-MIB': ['OwnerString', 'statistics', 'history', 'hosts', 'matrix', 'filter', 'etherStatsEntry', 'historyControlEntry', 'hostControlEntry', 'matrixControlEntry', 'filterEntry', 'channelEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'DisplayString', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'Gauge32', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['mib-2', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'TOKEN-RING-RMON-MIB': ['tokenRing', 'tokenRingMLStatsEntry', 'tokenRingPStatsEntry', 'ringStationControlEntry', 'sourceRoutingStatsEntry']}
    · Download RFC2021-RMON2-MIB.mib.txt
Records for description 4Belden, GarrettCom and Hirschmann IT official standalone MIBs1 record · 1 source

Description 4

addressMapSource · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs1 source

Status in source: current.

Names: addressMapSource

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "addressMapSource",
    "OBJECT-TYPE",
    "SYNTAX",
    "OBJECT",
    "IDENTIFIER",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC 2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC 2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.\"",
    "::=",
    "{",
    "addressMapEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "OBJECT IDENTIFIER",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC 2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC 2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 5Belden, GarrettCom and Hirschmann IT official standalone MIBs, FS.COM official Documentation Hub native MIB packages, and others1 record · 3 sources

Description 5

addressMapSource · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs, FS.COM official Documentation Hub native MIB packages, and others3 sources

Status in source: current.

Names: addressMapSource

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "addressMapSource",
    "OBJECT-TYPE",
    "SYNTAX",
    "OBJECT",
    "IDENTIFIER",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.\"",
    "::=",
    "{",
    "addressMapEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "OBJECT IDENTIFIER",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface which is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater."
    ],
    null,
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from Circitor
addressMapSource OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.

        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [3,5], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC1516], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects. This situation occurs when
        the dataSource points to an interface which is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }
Information from Cisco SMIv1
addressMapSource OBJECT-TYPE
    SYNTAX OBJECT IDENTIFIER
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.
        
        
        
        
        
        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [3,5], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.
        
        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC1516], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.
        
        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects. This situation occurs when
        the dataSource points to an interface which is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }
Information from MIBdepot
addressMapSource OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER



    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.

        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [RFC2863], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC2108], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects.  This situation occurs when
        the dataSource points to an interface that is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }
Information from Cisco
addressMapSource OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface or port on which the associated network
         address was most recently seen.





        If this address mapping was discovered on an interface, this
        object shall identify the instance of the ifIndex
        object, defined in [3,5], for the desired interface.
        For example, if an entry were to receive data from
        interface #1, this object would be set to ifIndex.1.

        If this address mapping was discovered on a port, this
        object shall identify the instance of the rptrGroupPortIndex
        object, defined in [RFC1516], for the desired port.
        For example, if an entry were to receive data from
        group #1, port #1, this object would be set to
        rptrGroupPortIndex.1.1.

        Note that while the dataSource associated with this entry
        may only point to index objects, this object may at times
        point to repeater port objects. This situation occurs when
        the dataSource points to an interface which is a locally
        attached repeater and the agent has additional information
        about the source port of traffic seen on that repeater."
    ::= { addressMapEntry 3 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.2)

Internet Assigned Numbers Authority

Siblings (4)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.2.1.16.13.5.1.1 addressMapTimeMark00 A TimeFilter for this entry. See the TimeFilter textual
convention to see how this works.
1.3.6.1.2.1.16.13.5.1.2 addressMapNetworkAddress00 The network address for this relation.

This is represented as an octet string with
specific semantics and length as identified
by …
1.3.6.1.2.1.16.13.5.1.4 addressMapPhysicalAddress00 The last source physical address on which the associated
network address was seen. If the protocol of the associated
network add…
1.3.6.1.2.1.16.13.5.1.5 addressMapLastChange00 The value of sysUpTime at the time this entry was last
created or the values of the physical address changed.

This can be used to…