OID reference
1.3.6.1.2.1.183.1.10.1.9
Number of dropped cells.
Identification
{1 3 6 1 2 1 183 1 10 1 9}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: pwIndex, pwAtmPerf1DayIntervalNumber.
snmpwalk [connection options] DEVICE .1.3.6.1.2.1.183.1.10.1.9
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
pwAtmPerf1DayIntervalCellsDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dropped cells."
::= { pwAtmPerf1DayIntervalEntry 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesRFC Editor
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pwAtmPerf1DayIntervalCellsDropped
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pwAtmPerf1DayIntervalCellsDropped",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of dropped cells.\"",
"::=",
"{",
"pwAtmPerf1DayIntervalEntry",
"9",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of dropped cells."
],
null,
null,
null,
null
]
}Module: PW-ATM-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'RowPointer'], 'ATM-TC-MIB': ['AtmVpIdentifier', 'AtmVcIdentifier'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Unsigned32', 'mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount']}Vendor MIB copy from the Observium Community archive.
Module: PW-ATM-MIB
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'RowPointer'], 'ATM-TC-MIB': ['AtmVpIdentifier', 'AtmVcIdentifier'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Unsigned32', 'mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: PW-ATM-MIB
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'RowPointer'], 'ATM-TC-MIB': ['AtmVpIdentifier', 'AtmVcIdentifier'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Unsigned32', 'mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.183.1.10.1.1 | pwAtmPerf1DayIntervalNumber | 0 | 0 | The number of intervals, where 1 indicates current day measured period and 2 and above indicate previous days, respectively. |
| 1.3.6.1.2.1.183.1.10.1.2 | pwAtmPerf1DayIntervalValidData | 0 | 0 | This object indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.183.1.10.1.3 | pwAtmPerf1DayIntervalDuration | 0 | 0 | The duration of a particular interval in seconds. Adjustments in the system\s time-of-day clock may cause the interval to be gr… |
| 1.3.6.1.2.1.183.1.10.1.4 | pwAtmPerf1DayIntervalMissingPkts | 0 | 0 | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.2.1.183.1.10.1.5 | pwAtmPerf1DayIntervalPktsReOrder | 0 | 0 | Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered. Note: some implemen… |
| 1.3.6.1.2.1.183.1.10.1.6 | pwAtmPerf1DayIntervalPktsMisOrder | 0 | 0 | Number of packets detected out of order (via control word sequence numbers) and that could not be re-ordered. |
| 1.3.6.1.2.1.183.1.10.1.7 | pwAtmPerf1DayIntervalPktsTimeout | 0 | 0 | Number of packets transmitted due to timeout expiration. |
| 1.3.6.1.2.1.183.1.10.1.8 | pwAtmPerf1DayIntervalCellsXmit | 0 | 0 | Number of transmitted cells. |
| 1.3.6.1.2.1.183.1.10.1.10 | pwAtmPerf1DayIntervalCellsReceived | 0 | 0 | Number of received cells. |
| 1.3.6.1.2.1.183.1.10.1.11 | pwAtmPerf1DayIntervalUnknownCells | 0 | 0 | Number of cells received from the PSN with unknown VPI or VCI values. This object is relevant only in N:1 mode. |