Status in source: unspecified.
Technical details
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"ptpbaseMIB",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230313730353330303030305a22"
],
"ORGANIZATION",
"\"TICTOC Working Group\"",
"CONTACT-INFO",
"\"WG Email: tictoc@ietf.org Vinay Shankarkumar Cisco Systems Email: vinays@cisco.com Laurent Montini Cisco Systems Email: lmontini@cisco.com Tim Frost Calnex Solutions Ltd. Email: tim.frost@calnexsol.com Greg Dowd Microsemi Inc. Email: greg.dowd@microsemi.com\"",
"DESCRIPTION",
"\"The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType \"",
"REVISION",
[
"literal",
"223230313730353330303030305a22"
],
"DESCRIPTION",
"\"Initial version of this MIB module, published as RFC 8173.\"",
"::=",
"{",
"mib-2",
"241",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"201705300000Z"
],
[
"ORGANIZATION",
"TICTOC Working Group"
],
[
"CONTACT-INFO",
"WG Email: tictoc@ietf.org Vinay Shankarkumar Cisco Systems Email: vinays@cisco.com Laurent Montini Cisco Systems Email: lmontini@cisco.com Tim Frost Calnex Solutions Ltd. Email: tim.frost@calnexsol.com Greg Dowd Microsemi Inc. Email: greg.dowd@microsemi.com"
],
[
"DESCRIPTION",
"The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType"
],
[
"Revisions",
[
[
"201705300000Z",
[
"DESCRIPTION",
"Initial version of this MIB module, published as RFC 8173."
]
]
]
]
]
}