Reference record for OID 1.3.6.1.2.1.264

g9982MIB

Status in source: unspecified.

Names: g9982MIB

{
  "smi_kind": "MODULE-IDENTITY",
  "definition": [
    "g9982MIB",
    "MODULE-IDENTITY",
    "LAST-UPDATED",
    [
      "literal",
      "223230313330323230303030305a22"
    ],
    "ORGANIZATION",
    "\"IETF ADSL MIB Working Group\"",
    "CONTACT-INFO",
    "\"WG charter: http://datatracker.ietf.org/wg/adslmib/charter/ Mailing Lists: General Discussion: adslmib@ietf.org To Subscribe: adslmib-request@ietf.org In Body: subscribe your_email_address Chair: Menachem Dodge Postal: ECI Telecom, Ltd. 30 Hasivim St. Petach-Tikva 4951169 Israel Phone: +972-3-926-8421 EMail: menachemdodge1@gmail.com Editor: Edward Beili Postal: Actelis Networks, Inc. 25 Bazel St., P.O.B. 10173 Petach-Tikva 49103 Israel Phone: +972-3-924-3491 EMail: edward.beili@actelis.com Editor: Moti Morgenstern Postal: ECI Telecom 30 Hasivim St. Petach-Tikva 4951169 Israel Phone: +972-3-926-6258 EMail: moti.morgenstern@ecitele.com\"",
    "DESCRIPTION",
    "\"The objects in this MIB module are used to manage the Ethernet-based multi-pair bonded xDSL interfaces, as defined in ITU-T Recommendation G.998.2 (G.Bond/Ethernet). This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [G.998.2] refers to: ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair bonding', January 2005. [G.998.2-Amd2] refers to: ITU-T Recommendation G.998.2 Amendment 2, December 2007. [802.3] refers to: IEEE Std 802.3-2005: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications', December 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: BACP - Bonding Aggregation Control Protocol BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer HDLC - High-level Data Link Control PTM-TC - Packet Transfer Mode Transmission Convergence (sub-layer) SNR - Signal to Noise Ratio TC - Transmission Convergence (sub-layer) UAS - Unavailable Seconds Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).\"",
    "REVISION",
    [
      "literal",
      "223230313330323230303030305a22"
    ],
    "DESCRIPTION",
    "\"Initial version, published as RFC 6767.\"",
    "::=",
    "{",
    "mib-2",
    "264",
    "}"
  ],
  "syntax_tree": [
    [
      "LAST-UPDATED",
      "201302200000Z"
    ],
    [
      "ORGANIZATION",
      "IETF ADSL MIB Working Group"
    ],
    [
      "CONTACT-INFO",
      "WG charter: http://datatracker.ietf.org/wg/adslmib/charter/ Mailing Lists: General Discussion: adslmib@ietf.org To Subscribe: adslmib-request@ietf.org In Body: subscribe your_email_address Chair: Menachem Dodge Postal: ECI Telecom, Ltd. 30 Hasivim St. Petach-Tikva 4951169 Israel Phone: +972-3-926-8421 EMail: menachemdodge1@gmail.com Editor: Edward Beili Postal: Actelis Networks, Inc. 25 Bazel St., P.O.B. 10173 Petach-Tikva 49103 Israel Phone: +972-3-924-3491 EMail: edward.beili@actelis.com Editor: Moti Morgenstern Postal: ECI Telecom 30 Hasivim St. Petach-Tikva 4951169 Israel Phone: +972-3-926-6258 EMail: moti.morgenstern@ecitele.com"
    ],
    [
      "DESCRIPTION",
      "The objects in this MIB module are used to manage the Ethernet-based multi-pair bonded xDSL interfaces, as defined in ITU-T Recommendation G.998.2 (G.Bond/Ethernet). This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [G.998.2] refers to: ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair bonding', January 2005. [G.998.2-Amd2] refers to: ITU-T Recommendation G.998.2 Amendment 2, December 2007. [802.3] refers to: IEEE Std 802.3-2005: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications', December 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: BACP - Bonding Aggregation Control Protocol BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer HDLC - High-level Data Link Control PTM-TC - Packet Transfer Mode Transmission Convergence (sub-layer) SNR - Signal to Noise Ratio TC - Transmission Convergence (sub-layer) UAS - Unavailable Seconds Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info)."
    ],
    [
      "Revisions",
      [
        [
          "201302200000Z",
          [
            "DESCRIPTION",
            "Initial version, published as RFC 6767."
          ]
        ]
      ]
    ]
  ]
}

• RFC Editor · RFC 6767 · RFC errata · Publisher's source file: Ethernet-Based xDSL Multi-Pair Bonding (G.Bond/Ethernet) MIB

  Module: G9982-MIB

  Published definition

  g9982MIB MODULE-IDENTITY
      LAST-UPDATED "201302200000Z"  -- 20 February 2013
      ORGANIZATION "IETF ADSL MIB Working Group"
      CONTACT-INFO
        "WG charter:
          http://datatracker.ietf.org/wg/adslmib/charter/
  
        Mailing Lists:
          General Discussion: adslmib@ietf.org
          To Subscribe: adslmib-request@ietf.org
          In Body: subscribe your_email_address
  
  
  
  
  
  
  
  
  
  
  
  
  
  
         Chair: Menachem Dodge
        Postal: ECI Telecom, Ltd.
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-8421
         EMail: menachemdodge1@gmail.com
  
        Editor: Edward Beili
        Postal: Actelis Networks, Inc.
                25 Bazel St., P.O.B. 10173
                Petach-Tikva  49103
                Israel
         Phone: +972-3-924-3491
         EMail: edward.beili@actelis.com
  
        Editor: Moti Morgenstern
        Postal: ECI Telecom
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-6258
         EMail: moti.morgenstern@ecitele.com"
  
      DESCRIPTION
        "The objects in this MIB module are used to manage the
        Ethernet-based multi-pair bonded xDSL interfaces, as defined in
        ITU-T Recommendation G.998.2 (G.Bond/Ethernet).
  
        This MIB module MUST be used in conjunction with the GBOND-MIB
        module, common to all G.Bond technologies.
  
        The following references are used throughout this MIB module:
  
        [G.998.2] refers to:
          ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
          bonding', January 2005.
  
        [G.998.2-Amd2] refers to:
          ITU-T Recommendation G.998.2 Amendment 2, December 2007.
  
        [802.3] refers to:
          IEEE Std 802.3-2005: 'IEEE Standard for Information
          technology - Telecommunications and information exchange
          between systems - Local and metropolitan area networks -
          Specific requirements -
  
  
  
  
  
  
  
  
  
  
  
          Part 3: Carrier Sense Multiple Access with Collision
          Detection (CSMA/CD) Access Method and Physical Layer
          Specifications', December 2005.
  
        [TR-159] refers to:
          Broadband Forum Technical Report: 'Management Framework for
          xDSL Bonding', December 2008.
  
        Naming Conventions:
          BACP   - Bonding Aggregation Control Protocol
          BCE    - Bonding Channel Entity
          BTU    - Bonding Terminating Unit
          BTU-C  - Bonding Terminating Unit, CO side
          BTU-R  - Bonding Terminating Unit, Remote Terminal (CPE) side
          CO     - Central Office
          CPE    - Customer Premises Equipment
          GBS    - Generic Bonding Sub-layer
          HDLC   - High-level Data Link Control
          PTM-TC - Packet Transfer Mode Transmission Convergence
                   (sub-layer)
          SNR    - Signal to Noise Ratio
          TC     - Transmission Convergence (sub-layer)
          UAS    - Unavailable Seconds
  
       Copyright (c) 2013 IETF Trust and the persons identified as
       authors of the code.  All rights reserved.
  
       Redistribution and use in source and binary forms, with or without
       modification, is permitted pursuant to, and subject to the license
       terms contained in, the Simplified BSD License set forth in Section
       4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
       (http://trustee.ietf.org/license-info)."
  
      REVISION    "201302200000Z"  -- 20 February 2013
      DESCRIPTION "Initial version, published as RFC 6767."
  
      ::= { mib-2 264 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'HC-PerfHist-TC-MIB': ['HCPerfCurrentCount', 'HCPerfValidIntervals', 'HCPerfInvalidIntervals', 'HCPerfTimeElapsed']}

  · Download Ethernet-Based xDSL Multi-Pair Bonding (G.Bond/Ethernet) MIB
  Source location: G9982-MIB::g9982MIB.
  Source version and references

  Downloaded: 2026-10-19T00:23:18.753468+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive.

  Module: G9982-MIB

  Published definition

  g9982MIB MODULE-IDENTITY
      LAST-UPDATED "201302200000Z"  -- 20 February 2013
      ORGANIZATION "IETF ADSL MIB Working Group"
      CONTACT-INFO
        "WG charter:
          http://datatracker.ietf.org/wg/adslmib/charter/
  
        Mailing Lists:
          General Discussion: adslmib@ietf.org
          To Subscribe: adslmib-request@ietf.org
          In Body: subscribe your_email_address
  
         Chair: Menachem Dodge
        Postal: ECI Telecom, Ltd.
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-8421
         EMail: menachemdodge1@gmail.com
  
        Editor: Edward Beili
        Postal: Actelis Networks, Inc.
                25 Bazel St., P.O.B. 10173
                Petach-Tikva  49103
                Israel
         Phone: +972-3-924-3491
         EMail: edward.beili@actelis.com
  
        Editor: Moti Morgenstern
        Postal: ECI Telecom
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-6258
         EMail: moti.morgenstern@ecitele.com"
      DESCRIPTION
        "The objects in this MIB module are used to manage the
        Ethernet-based multi-pair bonded xDSL interfaces, as defined in
        ITU-T Recommendation G.998.2 (G.Bond/Ethernet).
  
        This MIB module MUST be used in conjunction with the GBOND-MIB
        module, common to all G.Bond technologies.
  
        The following references are used throughout this MIB module:
  
        [G.998.2] refers to:
          ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
          bonding', January 2005.
  
        [G.998.2-Amd2] refers to:
          ITU-T Recommendation G.998.2 Amendment 2, December 2007.
  
        [802.3] refers to:
          IEEE Std 802.3-2005: 'IEEE Standard for Information
          technology - Telecommunications and information exchange
          between systems - Local and metropolitan area networks -
          Specific requirements -
  
          Part 3: Carrier Sense Multiple Access with Collision
          Detection (CSMA/CD) Access Method and Physical Layer
          Specifications', December 2005.
  
        [TR-159] refers to:
          Broadband Forum Technical Report: 'Management Framework for
          xDSL Bonding', December 2008.
  
        Naming Conventions:
          BACP   - Bonding Aggregation Control Protocol
          BCE    - Bonding Channel Entity
          BTU    - Bonding Terminating Unit
          BTU-C  - Bonding Terminating Unit, CO side
          BTU-R  - Bonding Terminating Unit, Remote Terminal (CPE) side
          CO     - Central Office
          CPE    - Customer Premises Equipment
          GBS    - Generic Bonding Sub-layer
          HDLC   - High-level Data Link Control
          PTM-TC - Packet Transfer Mode Transmission Convergence
                   (sub-layer)
          SNR    - Signal to Noise Ratio
          TC     - Transmission Convergence (sub-layer)
          UAS    - Unavailable Seconds
  
       Copyright (c) 2013 IETF Trust and the persons identified as
       authors of the code.  All rights reserved.
  
       Redistribution and use in source and binary forms, with or without
       modification, is permitted pursuant to, and subject to the license
       terms contained in, the Simplified BSD License set forth in Section
       4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
       (http://trustee.ietf.org/license-info)."
  
      REVISION    "201302200000Z"  -- 20 February 2013
      DESCRIPTION "Initial version, published as RFC 6767."
      ::= { mib-2 264 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'HC-PerfHist-TC-MIB': ['HCPerfCurrentCount', 'HCPerfValidIntervals', 'HCPerfInvalidIntervals', 'HCPerfTimeElapsed']}

  · Download G9982-MIB

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: G9982-MIB::g9982MIB.
  Source version and references

  Downloaded: 2026-10-24T02:14:26.673154+00:00.

• Netdisco MIB archive copies · Publisher's source file: G9982-MIB.txt

  Vendor MIB copy from the Netdisco archive.

  Module: G9982-MIB

  Published definition

  g9982MIB MODULE-IDENTITY
      LAST-UPDATED "201302200000Z"  -- 20 February 2013
      ORGANIZATION "IETF ADSL MIB Working Group"
      CONTACT-INFO
        "WG charter:
          http://datatracker.ietf.org/wg/adslmib/charter/
  
        Mailing Lists:
          General Discussion: adslmib@ietf.org
          To Subscribe: adslmib-request@ietf.org
          In Body: subscribe your_email_address
  
         Chair: Menachem Dodge
        Postal: ECI Telecom, Ltd.
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-8421
         EMail: menachemdodge1@gmail.com
  
        Editor: Edward Beili
        Postal: Actelis Networks, Inc.
                25 Bazel St., P.O.B. 10173
                Petach-Tikva  49103
                Israel
         Phone: +972-3-924-3491
         EMail: edward.beili@actelis.com
  
        Editor: Moti Morgenstern
        Postal: ECI Telecom
                30 Hasivim St.
                Petach-Tikva  4951169
                Israel
         Phone: +972-3-926-6258
         EMail: moti.morgenstern@ecitele.com"
      DESCRIPTION
        "The objects in this MIB module are used to manage the
        Ethernet-based multi-pair bonded xDSL interfaces, as defined in
        ITU-T Recommendation G.998.2 (G.Bond/Ethernet).
  
        This MIB module MUST be used in conjunction with the GBOND-MIB
        module, common to all G.Bond technologies.
  
        The following references are used throughout this MIB module:
  
        [G.998.2] refers to:
          ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
          bonding', January 2005.
  
        [G.998.2-Amd2] refers to:
          ITU-T Recommendation G.998.2 Amendment 2, December 2007.
  
        [802.3] refers to:
          IEEE Std 802.3-2005: 'IEEE Standard for Information
          technology - Telecommunications and information exchange
          between systems - Local and metropolitan area networks -
          Specific requirements -
  
          Part 3: Carrier Sense Multiple Access with Collision
          Detection (CSMA/CD) Access Method and Physical Layer
          Specifications', December 2005.
  
        [TR-159] refers to:
          Broadband Forum Technical Report: 'Management Framework for
          xDSL Bonding', December 2008.
  
        Naming Conventions:
          BACP   - Bonding Aggregation Control Protocol
          BCE    - Bonding Channel Entity
          BTU    - Bonding Terminating Unit
          BTU-C  - Bonding Terminating Unit, CO side
          BTU-R  - Bonding Terminating Unit, Remote Terminal (CPE) side
          CO     - Central Office
          CPE    - Customer Premises Equipment
          GBS    - Generic Bonding Sub-layer
          HDLC   - High-level Data Link Control
          PTM-TC - Packet Transfer Mode Transmission Convergence
                   (sub-layer)
          SNR    - Signal to Noise Ratio
          TC     - Transmission Convergence (sub-layer)
          UAS    - Unavailable Seconds
  
       Copyright (c) 2013 IETF Trust and the persons identified as
       authors of the code.  All rights reserved.
  
       Redistribution and use in source and binary forms, with or without
       modification, is permitted pursuant to, and subject to the license
       terms contained in, the Simplified BSD License set forth in Section
       4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
       (http://trustee.ietf.org/license-info)."
  
      REVISION    "201302200000Z"  -- 20 February 2013
      DESCRIPTION "Initial version, published as RFC 6767."
      ::= { mib-2 264 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'HC-PerfHist-TC-MIB': ['HCPerfCurrentCount', 'HCPerfValidIntervals', 'HCPerfInvalidIntervals', 'HCPerfTimeElapsed']}

  · Download G9982-MIB.txt

  Related source files and packages:

  • Netdisco archive revision metadata (not a manufacturer release date)File: repos/netdisco/netdisco-mibs/commits/master; 15,422 bytes
  • Netdisco MIB distribution at the selected archive revision38.9 MiB
  
  Source location: G9982-MIB::g9982MIB.
  Source version and references

  Downloaded: 2026-10-24T15:28:11.639979+00:00.