OID reference

ipv6IfOperStatus

1.3.6.1.2.1.55.1.5.1.10

Description

The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be d…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.2.1.55.1.5.1 (ipv6IfEntry)
Node code
10
Node name
ipv6IfOperStatus
Category
SNMP management object
Numeric OID
1.3.6.1.2.1.55.1.5.1.10
URN notation
urn:oid:1.3.6.1.2.1.55.1.5.1.10
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 2 1 55 1 5 1 10}

  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) ipv6MIB(55) ipv6MIBObjects(1) ipv6IfTable(5) ipv6IfEntry(1) ipv6IfOperStatus(10)}
OID-IRI notation
  • /1/3/6/1/2/1/55/1/5/1/10
  • /ISO/Identified-Organization/6/1/2/1/55/1/5/1/10
  • /ISO/3/6/1/2/1/55/1/5/1/10
Named path variants
  • /iso/identified-organization/dod/internet/mgmt/mib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/org/dod/internet/mgmt/mib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/org/dod/internet/mgmt/mib/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/org/dod/internet/mgmt/stdmib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/stdmib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-organization/dod/internet/mgmt/mib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-organization/dod/internet/mgmt/mib/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus
  • /iso/iso-organization/dod/internet/mgmt/stdmib-2/ipv6MIB/ipv6MIBObjects/ipv6IfTable/ipv6IfEntry/ipv6IfOperStatus

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
obsolete, mandatory, current

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — RFC Editor, Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), and others

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
obsolete

Variant 2 — Cisco SMIv1

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Variant 3 — MIBdepot, Circitor, and others

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.

ValueName and source notesSource variants
1up
ready to pass packets
1, 2, 3
2down1, 2, 3
3noIfIdentifier
no interface identifier
1, 2, 3
4unknown
reason
1, 2, 3
5notPresent
missing
1, 2, 3

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: ipv6IfIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.2.1.55.1.5.1.10

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES, IES5220-6S-3ES, N5580-32C, N5580-48Y8C, N5850-48S6Q, N5860-48SC.

Show 24 more models

N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF, S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

Available source records contain 1 distinct definition; some records may not include a definition.

Show 1 published definition

ipv6IfOperStatus · obsolete

ipv6IfOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
             up(1),             -- ready to pass packets

             down(2),
             noIfIdentifier(3), -- no interface identifier

                                -- status can not be









                                -- determined for some
             unknown(4),        -- reason

                                -- some component is
             notPresent(5)      -- missing
            }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
      "The current operational state of the interface.
      The noIfIdentifier(3) state indicates that no valid
      Interface Identifier is assigned to the interface.
      This state usually indicates that the link-local
      interface address failed Duplicate Address Detection.
      If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
      should be down(2).  If ipv6IfAdminStatus is changed
      to up(1) then ipv6IfOperStatus should change to up(1)
      if the interface is ready to transmit and receive
      network traffic; it should remain in the down(2) or
      noIfIdentifier(3) state if and only if there is a
      fault that prevents it from going to the up(1) state;
      it should remain in the notPresent(5) state if
      the interface has missing (typically, lower layer)
      components.

      This object is obsolete.  IPv6 does not have a
      separate operational status; the operational status of the
      interface is represented by IF-MIB::ifOperStatus."
    ::= { ipv6IfEntry 10 }

Meaning

Descriptions

7 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components.
Original text from OID Repository
ipv6IfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
noIfIdentifier(3), -- no interface identifier
-- status can not be
-- determined for some
unknown(4), -- reason
-- some component is
notPresent(5) -- missing
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The noIfIdentifier(3) state indicates that no valid
Interface Identifier is assigned to the interface.
This state usually indicates that the link-local
interface address failed Duplicate Address Detection.
If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
should be down(2). If ipv6IfAdminStatus is changed
to up(1) then ipv6IfOperStatus should change to up(1)
if the interface is ready to transmit and receive
network traffic; it should remain in the down(2) or
noIfIdentifier(3) state if and only if there is a
fault that prevents it from going to the up(1) state;
it should remain in the notPresent(5) state if
the interface has missing (typically, lower layer)
components."
Sources for this description

See 3 matching source records

OID Repository

View at oid-base.com
Automatically extracted from RFC2465

Circitor

Parsed from IPV6-MIB.mib · IPV6-MIB

Source file: Download IPV6-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download rfc2465-ipv6.mib · Publisher's file

Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download IPV6-MIB.my · Publisher's file

Related source files and packages:

Source file: Download IPV6-MIB-2465.mib · Publisher's file

Other official packages with the same file

s3100-16tf-switch-snmp-mib-files.zip

s5860-series-swithes-snmp-mib-files.zip

s3910-series-swithes-snmp-mib-files.zip

s3410-series-swithes-snmp-mib-files.zip

Source file: Download stdipv6.mib · Publisher's file

Source file: Download ipv6_mib.my · Publisher's file

Other official packages with the same file

M4250H-v13.0.4.14-mibs.zip

M4250H-v13.0.4.13-mibs.zip

M4250L-v13.0.4.14-mibs.zip

Source file: Download ipv6_mib.my · Publisher's file

Other official packages with the same file

xsm72xxs-v9.0.1.46-mibs.zip

XS508TM_XS516TM-v7.8.11.13-Mibs.zip

mibs-m4500-48xf8c-7.0.5.6.tar.bz2

mibs-m4500-48xf8c-7.0.4.30.tar.bz2

Source file: Download ipv6_mib.my · Publisher's file

Other official packages with the same file

xs7xxt_6.6.3.2-mibs.zip

xs7xxt6.6.3.3-mibs.zip

xs7xxt-v6.6.1.7-mibs.zip

XS7xxT_V6.6.3.5-mibs.zip

Source file: Download ipv6_mib.my · Publisher's file

Other official packages with the same file

xs7xxtv7.0.0.24-mibs.zip

xs7xxtv7.0.0.20-mibs.zip

m6100v11.0.0.40-mibs.zip

m5300v11.0.0.40-mibs.zip

Source file: Download ipv6_mib.mib · Publisher's file

Other official packages with the same file

LC-YS-7154CF-5.30.0363-RU2-MIB.zip

LC-XS-6128QF-5.20.0534-RU12-MIB.zip

LC-XS-5116QF-5.20.0534-RU12-MIB.zip

LC-XS-5110F-5.20.0534-RU12-MIB.zip

Source file: Download IPV6-MIB.txt · Publisher's file Cisco ucs-C-Series-mibs UCS-C-SERIES-C3x60M3

Related source files and packages:

Browse all files from Cisco

Description 2

This object is used only as a VB bound variable of the alarm.

Implementation notes: This object is used only as a VB bound variable of the alarm.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 3

The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components. This object is obsolete. IPv6 does not have a separate operational status; the operational status of the interface is represented by IF-MIB::ifOperStatus.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Belden, GarrettCom and Hirschmann IT official standalone MIBsFS.COM official Documentation Hub native MIB packagesCommon and standard MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesRFC Editor

See 1 matching source record

Description 4

The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components.

Implementation notes: This object is used only as a VB bound variable of the alarm.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 3 matching source records

Description 5

The value of this object identifies the current operating status of this interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components.

Implementation notes: Currently, only the statuses up(1) and down(2) are supported.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 6

The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components.

Implementation notes: This object is used only as a VB bound variable of the alarm.

Sources for this description

Encoded line breaks have been normalized for display; the original file is unchanged.

Huawei official enterprise MIB Query and object descriptions

See 3 matching source records

Description 7

Operating state of the interface.

Sources for this description

H3C official MIB documentation and object descriptions

See 1 matching source record

Evidence

Source records

7 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 2

ipv6IfOperStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: ipv6IfOperStatus

Technical details
{
  "syntax": "INTEGER{(up,1),(down,2),(noIfIdentifier,3),(unknown,4),(notPresent,5)}",
  "max_access": "read-only",
  "object_class": "table column",
  "implementation_notes": "This object is used only as a VB bound variable of the alarm."
}
Records for description 3Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Belden, GarrettCom and Hirschmann IT official standalone MIBs, and others1 record · 6 sources

Description 3

ipv6IfOperStatus · obsoleteMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Belden, GarrettCom and Hirschmann IT official standalone MIBs, and others6 sources

Status in source: obsolete.

Names: ipv6IfOperStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "ipv6IfOperStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    ",",
    "noIfIdentifier",
    "(",
    "3",
    ")",
    ",",
    "unknown",
    "(",
    "4",
    ")",
    ",",
    "notPresent",
    "(",
    "5",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "obsolete",
    "DESCRIPTION",
    "\"The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components. This object is obsolete. IPv6 does not have a separate operational status; the operational status of the interface is represented by IF-MIB::ifOperStatus.\"",
    "::=",
    "{",
    "ipv6IfEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "up",
            1
          ],
          [
            "down",
            2
          ],
          [
            "noIfIdentifier",
            3
          ],
          [
            "unknown",
            4
          ],
          [
            "notPresent",
            5
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "obsolete"
    ],
    [
      "DESCRIPTION",
      "The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components. This object is obsolete. IPv6 does not have a separate operational status; the operational status of the interface is represented by IF-MIB::ifOperStatus."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 1, 4, 6Huawei official enterprise MIB Query and object descriptions3 records · 3 sources

Description 1 · Description 4 · Description 6

ipv6IfOperStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
ipv6IfOperStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: ipv6IfOperStatus

Technical details
{
  "syntax": "INTEGER{(up,1),(down,2),(noIfIdentifier,3),(unknown,4),(notPresent,5)}",
  "max_access": "read-only",
  "object_class": "table column",
  "implementation_notes": "This object is used only as a VB bound variable of the alarm."
}
ipv6IfOperStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: ipv6IfOperStatus

Technical details
{
  "syntax": "INTEGER{up(1),down(2),noIfIdentifier(3),unknown(4),notPresent(5)}",
  "max_access": "read-only",
  "object_class": "table column",
  "implementation_notes": "This object is used only as a VB bound variable of the alarm."
}
Records for description 5Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 5

ipv6IfOperStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
Records for description 7H3C official MIB documentation and object descriptions1 record · 38 sources

Description 7

ipv6IfOperStatus · unspecifiedH3C official MIB documentation and object descriptions38 sources

Status in source: unspecified.

Names: ipv6IfOperStatus

Technical details
{}

Browse all 38 supporting sources

Historical records

Additional source information

Information from Circitor
ipv6IfOperStatus OBJECT-TYPE
            SYNTAX  INTEGER {
                     up(1),             

                     down(2),

                     noIfIdentifier(3), 

                                        
                                        
                     unknown(4),        

                                        
                     notPresent(5)      
                    }
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
              "The current operational state of the interface.
              The noIfIdentifier(3) state indicates that no valid
              Interface Identifier is assigned to the interface.
              This state usually indicates that the link-local
              interface address failed Duplicate Address Detection.
              If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
              should be down(2).  If ipv6IfAdminStatus is changed
              to up(1) then ipv6IfOperStatus should change to up(1)
              if the interface is ready to transmit and receive
              network traffic; it should remain in the down(2) or
              noIfIdentifier(3) state if and only if there is a
              fault that prevents it from going to the up(1) state;
              it should remain in the notPresent(5) state if
              the interface has missing (typically, lower layer)
              components."
            ::= { ipv6IfEntry 10 }
Information from Cisco SMIv1
ipv6IfOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        up(1),
        down(2),
        noIfIdentifier(3),
        unknown(4),
        notPresent(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The current operational state of the interface.
        The noIfIdentifier(3) state indicates that no valid
        Interface Identifier is assigned to the interface.
        This state usually indicates that the link-local
        interface address failed Duplicate Address Detection.
        If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
        should be down(2).  If ipv6IfAdminStatus is changed
        to up(1) then ipv6IfOperStatus should change to up(1)
        if the interface is ready to transmit and receive
        network traffic; it should remain in the down(2) or
        noIfIdentifier(3) state if and only if there is a
        fault that prevents it from going to the up(1) state;
        it should remain in the notPresent(5) state if
        the interface has missing (typically, lower layer)
        components."
    ::= { ipv6IfEntry 10 }
Information from MIBdepot
ipv6IfOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
             up(1),             

             down(2),
             noIfIdentifier(3), 

                                
                                
             unknown(4),        

                                
             notPresent(5)      
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The current operational state of the interface.
      The noIfIdentifier(3) state indicates that no valid
      Interface Identifier is assigned to the interface.
      This state usually indicates that the link-local
      interface address failed Duplicate Address Detection.
      If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
      should be down(2).  If ipv6IfAdminStatus is changed
      to up(1) then ipv6IfOperStatus should change to up(1)
      if the interface is ready to transmit and receive
      network traffic; it should remain in the down(2) or
      noIfIdentifier(3) state if and only if there is a
      fault that prevents it from going to the up(1) state;
      it should remain in the notPresent(5) state if
      the interface has missing (typically, lower layer)
      components."
    ::= { ipv6IfEntry 10 }
Information from Cisco
ipv6IfOperStatus OBJECT-TYPE
            SYNTAX  INTEGER {
                     up(1),             

                     down(2),

                     noIfIdentifier(3), 

                                        
                                        
                     unknown(4),        

                                        
                     notPresent(5)      
                    }
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
              "The current operational state of the interface.
              The noIfIdentifier(3) state indicates that no valid
              Interface Identifier is assigned to the interface.
              This state usually indicates that the link-local
              interface address failed Duplicate Address Detection.
              If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus
              should be down(2).  If ipv6IfAdminStatus is changed
              to up(1) then ipv6IfOperStatus should change to up(1)
              if the interface is ready to transmit and receive
              network traffic; it should remain in the down(2) or
              noIfIdentifier(3) state if and only if there is a
              fault that prevents it from going to the up(1) state;
              it should remain in the notPresent(5) state if
              the interface has missing (typically, lower layer)
              components."
            ::= { ipv6IfEntry 10 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.2)

Internet Assigned Numbers Authority

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.2.1.55.1.5.1.1 ipv6IfIndex00 A unique non-zero value identifying
the particular IPv6 interface.
1.3.6.1.2.1.55.1.5.1.2 ipv6IfDescr00 A textual string containing information about the
interface. This string may be set by the network
management system.
1.3.6.1.2.1.55.1.5.1.3 ipv6IfLowerLayer00 This object identifies the protocol layer over
which this network interface operates. If this
network interface operates over th…
1.3.6.1.2.1.55.1.5.1.4 ipv6IfEffectiveMtu00 The size of the largest IPv6 packet which can be
sent/received on the interface, specified in
octets.
1.3.6.1.2.1.55.1.5.1.5 ipv6IfReasmMaxSize00 The size of the largest IPv6 datagram which this
entity can re-assemble from incoming IPv6 fragmented
datagrams received on this …
1.3.6.1.2.1.55.1.5.1.6 ipv6IfIdentifier00 The Interface Identifier for this interface that
is (at least) unique on the link this interface is
attached to. The Interface Id…
1.3.6.1.2.1.55.1.5.1.7 ipv6IfIdentifierLength00 The length of the Interface Identifier in bits.
1.3.6.1.2.1.55.1.5.1.8 ipv6IfPhysicalAddress00 The interface's physical address. For example, for
an IPv6 interface attached to an 802.x link, this
object normally contains a M…
1.3.6.1.2.1.55.1.5.1.9 ipv6IfAdminStatus00 The desired state of the interface. When a managed
system initializes, all IPv6 interfaces start with
ipv6IfAdminStatus in the …
1.3.6.1.2.1.55.1.5.1.11 ipv6IfLastChange00 The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior t…