OID reference

pingCtlByPassRouteTable

1.3.6.1.2.1.80.1.2.1.21

Description

The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the ping operat…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.2.1.80.1.2.1 (pingCtlEntry)
Node code
21
Node names
  • pingCtlByPassRouteTable
  • pingCtlRowStatus
Category
SNMP management object
Numeric OID
1.3.6.1.2.1.80.1.2.1.21
URN notation
urn:oid:1.3.6.1.2.1.80.1.2.1.21
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 2 1 80 1 2 1 21}

  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlByPassRouteTable(21)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) pingMIB(80) pingObjects(1) pingCtlTable(2) pingCtlEntry(1) pingCtlRowStatus(21)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/2/1/80/1/2/1/21
  • /ISO/Identified-Organization/6/1/2/1/80/1/2/1/21
  • /ISO/3/6/1/2/1/80/1/2/1/21
Named path variants
  • /iso/identified-organization/dod/internet/mgmt/mib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/identified-organization/dod/internet/mgmt/mib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/identified-organization/dod/internet/mgmt/mib/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/org/dod/internet/mgmt/mib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/org/dod/internet/mgmt/mib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/org/dod/internet/mgmt/mib/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/org/dod/internet/mgmt/mib/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • /iso/org/dod/internet/mgmt/stdmib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlByPassRouteTable
  • /iso/org/dod/internet/mgmt/stdmib-2/pingMIB/pingObjects/pingCtlTable/pingCtlEntry/pingCtlRowStatus
  • Additional combinations skipped.

SNMP properties

Value type
TruthValue
Maximum access defined by MIB
read-create, read-write
Status in MIB
current, mandatory
Default value
false

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — RFC Editor, MIBdepot, and others

Value type
TruthValue
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
false

Variant 2 — Cisco SMIv1

Value type
TruthValue
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Default value
false

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES, IES5220-6S-3ES, N5580-32C, N5580-48Y8C, N5850-48S6Q, N5860-48SC.

Show 24 more models

N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF, S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:

These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

pingCtlByPassRouteTable · current

pingCtlByPassRouteTable OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-create
       STATUS      current

       DESCRIPTION
          "The purpose of this object is to enable optional
          bypassing the route table.  If enabled, the remote
          host will bypass the normal routing tables and send
          directly to a host on an attached network.  If the
          host is not on a directly attached network, an
          error is returned.  This option can be used to perform
          the ping operation to a local host through an
          interface that has no route defined (e.g., after the
          interface was dropped by the routing daemon at the host)."









       DEFVAL { false }
       ::= { pingCtlEntry 21 }

pingCtlByPassRouteTable · current

pingCtlByPassRouteTable OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-create
       STATUS      current

       DESCRIPTION
          "The purpose of this object is to enable optional
          bypassing the route table.  If enabled, the remote
          host will bypass the normal routing tables and send
          directly to a host on an attached network.  If the
          host is not on a directly attached network, an
          error is returned.  This option can be used to perform
          the ping operation to a local host through an
          interface that has no route defined (e.g., after the
          interface was dropped by the routing daemon at the host)."
       DEFVAL { false }
       ::= { pingCtlEntry 21 }

pingCtlByPassRouteTable · current

pingCtlByPassRouteTable OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-create
   STATUS      current

   DESCRIPTION
      "The purpose of this object is to enable optional
      bypassing the route table.  If enabled, the remote
      host will bypass the normal routing tables and send
      directly to a host on an attached network.  If the
      host is not on a directly attached network, an
      error is returned.  This option can be used to perform
      the ping operation to a local host through an
      interface that has no route defined (e.g., after the
      interface was dropped by the routing daemon at the host)."
   DEFVAL { false }
   ::= { pingCtlEntry 21 }

pingCtlByPassRouteTable · current

pingCtlByPassRouteTable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The purpose of this object is to enable optional
       bypassing the route table.  If enabled, the remote
       host will bypass the normal routing tables and send
       directly to a host on an attached network.  If the
       host is not on a directly attached network, an
       error is returned.  This option can be used to perform
       the ping operation to a local host through an
       interface that has no route defined (e.g., after the
       interface was dropped by the routing daemon at the host)."
    DEFVAL { false }
    ::= { pingCtlEntry 21 }

Meaning

Descriptions

5 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the ping operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed).
Original text from OID Repository
pingCtlByPassRouteTable OBJECT-TYPE SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the ping operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed)."
DEFVAL { false }
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from RFC2925

Circitor

Parsed from DISMAN-PING-MIB.mib · DISMAN-PING-MIB

Source file: Download DISMAN-PING-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download rfc2925-disman-ping.mib · Publisher's file

Related source files and packages:

Show more related files and packages
Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download rfc2925.mib · Publisher's file

Related source files and packages:

Show more related files and packages
Other official packages with the same file

MIB-6.5.1.22.zip

XS728T_XS748T_mib_files.zip

XS728T_XS748T_MIB_V6.5.1.59.zip

XS728T_XS748T_MIB_V6.5.1.42.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages
Other official packages with the same file

M4250H-v13.0.4.14-mibs.zip

M4250H-v13.0.4.13-mibs.zip

M4250L-v13.0.4.14-mibs.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages

Browse all related files for rfc2925_ping.my

Other official packages with the same file

XS508TM_XS516TM-v7.8.11.13-Mibs.zip

M4350-v14.0.9.10-mibs.zip

M4350-v14.0.6.9-mibs.zip

M4350-v14.0.6.19-mibs.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages

Browse all related files for rfc2925_ping.my

Other official packages with the same file

mibs-m4500-48xf8c-7.0.5.6.tar.bz2

mibs-m4500-48xf8c-7.0.4.30.tar.bz2

mibs-m4500-48xf8c-7.0.4.23.tar.bz2

mibs-m4500-48xf8c-7.0.4.18.tar.bz2

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages
Other official packages with the same file

xsm72xxs-v9.0.1.46-mibs.zip

gs7xxts_tps-v5.3.0.31-mibs.zip

gs7xxts_tps-v5.3.0.29-mibs.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages

Browse all related files for rfc2925_ping.my

Other official packages with the same file

xs7xxt_6.6.3.2-mibs.zip

xs712t-v6.1.0.36-mibs.zip

xs712t-v6.1.0.34-mibs.zip

xs7xxt6.6.3.3-mibs.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages

Browse all related files for rfc2925_ping.my

Other official packages with the same file

xs7xxtv7.0.0.24-mibs.zip

xs7xxtv7.0.0.20-mibs.zip

s3300v6.6.4.26-mibs.zip

s3300v6.6.4.25-mibs.zip

Source file: Download rfc2925_ping.my · Publisher's file

Related source files and packages:

Show more related files and packages
Other official packages with the same file

GSM72xxP-mibs-fwv9.0.2.2.zip

gs7xxts_tps-v5.3.0.36-mibs.zip

gs7xxts_tps-v5.3.0.35-mibs.zip

fs728tp_5.0.2.50-mibs.zip

Source file: Download rfc2925_ping.mib · Publisher's file

Related source files and packages:

Show more related files and packages

Browse all related files for rfc2925_ping.mib

Other official packages with the same file

LC-YS-7154CF-5.30.0363-RU2-MIB.zip

LC-XS-6128QF-5.20.0534-RU12-MIB.zip

LC-XS-5116QF-5.20.0534-RU12-MIB.zip

LC-XS-5110F-5.20.0534-RU12-MIB.zip

Browse all files from Cisco

Cisco SMIv1

Source file: Download DISMAN-PING-MIB-V1SMI.my · Publisher's file

Browse all files from Cisco SMIv1

Description 2

This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in all corresponding (same
pingCtlOwnerIndex and pingCtlTestName index values)
pingResultsTable and pingProbeHistoryTable entries
being deleted.

A value MUST be specified for pingCtlTargetAddress
prior to a transition to active(1) state being
accepted.

Activation of a remote ping operation is controlled
via pingCtlAdminStatus and not by transitioning of
this object's value to active(1).

Transitions in and out of active(1) state are not
allowed while an entry's pingResultsOperStatus is
active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active
ping operation.

The operational state of a ping operation
can be determined by examination of its
pingResultsOperStatus object.
Sources for this description

MIBdepot

Description 3

The purpose of this object is to optionally enable bypassing the routing table.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 4

The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned. This option can be used to perform the ping operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by the routing daemon at the host).

Sources for this description

Encoded line breaks have been normalized for display; the original file is unchanged.

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Belden, GarrettCom and Hirschmann IT official standalone MIBsD-Link official switch MIBsFS.COM official Documentation Hub native MIB packagesHuawei official enterprise MIB Query and object descriptionsMIBdepotCommon and standard MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesRFC Editor

See 4 matching source records

Description 5

Whether to bypass the routing table when sending data packets.

Sources for this description

H3C official MIB documentation and object descriptions

See 1 matching source record

Evidence

Source records

7 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3Huawei official enterprise MIB Query and object descriptions2 records · 2 sources

Description 3

pingCtlByPassRouteTable · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{
  "syntax": "TruthValue",
  "max_access": "read-create",
  "object_class": "table column"
}
pingCtlByPassRouteTable · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{
  "syntax": "INTEGER{true(1),false(2)}",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 4Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Belden, GarrettCom and Hirschmann IT official standalone MIBs, and others4 records · 13 sources

Description 4

pingCtlByPassRouteTable · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{
  "syntax": "INTEGER{true(1),false(2)}",
  "max_access": "read-create",
  "object_class": "table column"
}
pingCtlByPassRouteTable · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{
  "syntax": "INTEGER{true(1),false(2)}",
  "max_access": "read-create",
  "object_class": "table column"
}
pingCtlByPassRouteTable · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Belden, GarrettCom and Hirschmann IT official standalone MIBs, and others10 sources

Status in source: current.

Names: pingCtlByPassRouteTable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pingCtlByPassRouteTable",
    "OBJECT-TYPE",
    "SYNTAX",
    "TruthValue",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned. This option can be used to perform the ping operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by the routing daemon at the host).\"",
    "DEFVAL",
    "{",
    "false",
    "}",
    "::=",
    "{",
    "pingCtlEntry",
    "21",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "TruthValue"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned. This option can be used to perform the ping operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by the routing daemon at the host)."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "false"
    ]
  ]
}
pingCtlByPassRouteTable · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{
  "syntax": "INTEGER{(true,1),(false,2)}",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 5H3C official MIB documentation and object descriptions1 record · 36 sources

Description 5

pingCtlByPassRouteTable · unspecifiedH3C official MIB documentation and object descriptions36 sources

Status in source: unspecified.

Names: pingCtlByPassRouteTable

Technical details
{}

Browse all 36 supporting sources

Historical records

Additional source information

Information from Circitor 
pingCtlByPassRouteTable OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The purpose of this object is to optionally enable
       bypassing the route table.  If enabled, the remote
       host will bypass the normal routing tables and send
       directly to a host on an attached network.  If the
       host is not on a directly-attached network, an
       error is returned.  This option can be used to perform
       the ping operation to a local host through an
       interface that has no route defined (e.g., after the
       interface was dropped by routed)."
    DEFVAL { false }
    ::= { pingCtlEntry 21 }
Information from Cisco SMIv1 
pingCtlByPassRouteTable OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The purpose of this object is to optionally enable
        bypassing the route table.  If enabled, the remote
        host will bypass the normal routing tables and send
        directly to a host on an attached network.  If the
        host is not on a directly-attached network, an
        error is returned.  This option can be used to perform
        the ping operation to a local host through an
        interface that has no route defined (e.g., after the
        interface was dropped by routed)."
    DEFVAL { false }
    ::= { pingCtlEntry 21 }
Information from MIBdepot 
pingCtlRowStatus OBJECT-TYPE
      SYNTAX      RowStatus
      ACCESS  read-write
      STATUS      mandatory
      DESCRIPTION
          "This object allows entries to be created and deleted
          in the pingCtlTable.  Deletion of an entry in this
          table results in all corresponding (same
          pingCtlOwnerIndex and pingCtlTestName index values)
          pingResultsTable and pingProbeHistoryTable entries
          being deleted.
 
          A value MUST be specified for pingCtlTargetAddress
          prior to a transition to active(1) state being
          accepted.
 
          Activation of a remote ping operation is controlled
          via pingCtlAdminStatus and not by transitioning of
          this object's value to active(1).
 
          Transitions in and out of active(1) state are not
          allowed while an entry's pingResultsOperStatus is
          active(1) with the exception that deletion of
          an entry in this table by setting its RowStatus
          object to destroy(6) will stop an active
          ping operation.
 
          The operational state of a ping operation
          can be determined by examination of its
          pingResultsOperStatus object."
      REFERENCE
          "RFC 2579, 'Textual Conventions for SMIv2.'"
      ::= { pingCtlEntry 21 }
Information from Cisco 
pingCtlByPassRouteTable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The purpose of this object is to optionally enable
        bypassing the route table.  If enabled, the remote
        host will bypass the normal routing tables and send
        directly to a host on an attached network.  If the
        host is not on a directly-attached network, an
        error is returned.  This option can be used to perform
        the ping operation to a local host through an
        interface that has no route defined (e.g., after the
        interface was dropped by routed)."
    DEFVAL          { false } 
    ::= { pingCtlEntry 21 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.2)

Internet Assigned Numbers Authority

Siblings (22)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.2.1.80.1.2.1.1 pingCtlOwnerIndex00 To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575,…
1.3.6.1.2.1.80.1.2.1.2 pingCtlTestName00 The name of the ping test. This is locally unique, within
the scope of an pingCtlOwnerIndex.
1.3.6.1.2.1.80.1.2.1.3 pingCtlTargetAddressType00 Specifies the type of host address to be used at a remote
host for performing a ping operation.
1.3.6.1.2.1.80.1.2.1.4 pingCtlTargetAddress00 Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by t…
1.3.6.1.2.1.80.1.2.1.5 pingCtlDataSize00 Specifies the size of the data portion to be
transmitted in a ping operation in octets. A ping
request is usually an ICMP messag…
1.3.6.1.2.1.80.1.2.1.6 pingCtlTimeOut00 Specifies the time-out value, in seconds, for a
remote ping operation.
1.3.6.1.2.1.80.1.2.1.7 pingCtlProbeCount00 Specifies the number of times to perform a ping
operation at a remote host.
1.3.6.1.2.1.80.1.2.1.8 pingCtlAdminStatus00 Reflects the desired state that a pingCtlEntry should be
in:

enabled(1) - Attempt to activate the test as defined by
this pingCtl…
1.3.6.1.2.1.80.1.2.1.9 pingCtlDataFill00 The content of this object is used together with the
corresponding pingCtlDataSize value to determine how to
fill the data portio…
1.3.6.1.2.1.80.1.2.1.10 pingCtlFrequency00 The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding ro…
1.3.6.1.2.1.80.1.2.1.11 pingCtlMaxRows00 The maximum number of entries allowed in the
pingProbeHistoryTable. An implementation of this
MIB will remove the oldest entry i…
1.3.6.1.2.1.80.1.2.1.12 pingCtlStorageType00 The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columna…
1.3.6.1.2.1.80.1.2.1.13 pingCtlTrapGeneration00 The value of this object determines when and if
to generate a notification for this entry:

probeFailure(0) - Generate a pingPro…
1.3.6.1.2.1.80.1.2.1.14 pingCtlTrapProbeFailureFilter, pingCtlTrapFilter00 The value of this object is used to determine when
to generate a pingProbeFailed NOTIFICATION.

Setting pingCtlTrapGeneration
to pr…
1.3.6.1.2.1.80.1.2.1.15 pingCtlTrapTestFailureFilter, pingCtlType00 The value of this object is used to determine when
to generate a pingTestFailed NOTIFICATION.

Setting pingCtlTrapGeneration to te…
1.3.6.1.2.1.80.1.2.1.16 pingCtlType, pingCtlDescr00 The value of this object is used to either report or
select the implementation method to be used for
calculating a ping response …
1.3.6.1.2.1.80.1.2.1.17 pingCtlDescr, pingCtlSourceAddress00 The purpose of this object is to provide a
descriptive name of the remote ping test.
1.3.6.1.2.1.80.1.2.1.18 pingCtlSourceAddressType, pingCtlIfIndex00 Specifies the type of the source address,
pingCtlSourceAddress, to be used at a remote host
when performing a ping operation.
1.3.6.1.2.1.80.1.2.1.19 pingCtlSourceAddress, pingCtlByPassRouteTable00 Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe pac…
1.3.6.1.2.1.80.1.2.1.20 pingCtlIfIndex, pingCtlDSField00 Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted…
1.3.6.1.2.1.80.1.2.1.22 pingCtlDSField00 Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The …
1.3.6.1.2.1.80.1.2.1.23 pingCtlRowStatus00 This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in all corr…