OID reference

teLinkBandwidthEntry

1.3.6.1.3.114.1.5.1

Description

An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a teLinkBandwidthEntry using the same ifIndex is created. If a TE link entry in the ifTable is destroyed, then so are all entries in the teLinkBandwidthTable that use the ifIndex of t…

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.3.114.1.5 (teLinkBandwidthTable)
Node code: 1
Node name: teLinkBandwidthEntry
Category: SNMP management object
Numeric OID: 1.3.6.1.3.114.1.5.1
URN notation: urn:oid:1.3.6.1.3.114.1.5.1
Type: OBJECT-TYPE

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 3 114 1 5 1}

{iso(1) identified-organization(3) dod(6) internet(1) experimental(3) teLinkMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) identified-organization(3) dod(6) internet(1) experimental(3) linkBundlingMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) org(3) dod(6) internet(1) experimental(3) teLinkMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) org(3) dod(6) internet(1) experimental(3) linkBundlingMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) teLinkMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) linkBundlingMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) iso-organization(3) dod(6) internet(1) experimental(3) teLinkMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}
{iso(1) iso-organization(3) dod(6) internet(1) experimental(3) linkBundlingMIB(114) linkBundlingObjects(1) teLinkBandwidthTable(5) teLinkBandwidthEntry(1)}

OID-IRI notation

/1/3/6/1/3/114/1/5/1
/ISO/Identified-Organization/6/1/3/114/1/5/1
/ISO/3/6/1/3/114/1/5/1

Named path variants

/iso/identified-organization/dod/internet/experimental/teLinkMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/identified-organization/dod/internet/experimental/linkBundlingMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/identified-organization/dod/internet/experimental/TE-LINK-MIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/org/dod/internet/experimental/teLinkMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/org/dod/internet/experimental/linkBundlingMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/org/dod/internet/experimental/TE-LINK-MIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-identified-organization/dod/internet/experimental/teLinkMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-identified-organization/dod/internet/experimental/linkBundlingMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-identified-organization/dod/internet/experimental/TE-LINK-MIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-organization/dod/internet/experimental/teLinkMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-organization/dod/internet/experimental/linkBundlingMIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry
/iso/iso-organization/dod/internet/experimental/TE-LINK-MIB/linkBundlingObjects/teLinkBandwidthTable/teLinkBandwidthEntry

SNMP properties

Value type: TeLinkBandwidthEntry
Maximum access defined by MIB: not-accessible
Status in MIB: current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

An entry in this table contains information about
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a teLinkBandwidthEntry using the
same ifIndex is created. If a TE link entry in the ifTable
is destroyed, then so are all entries in the teLinkBandwidthTable
that use the ifIndex of this TE link.

Sources for this description

MIBdepot

Parsed from LINK-BUNDLING-MIB-mpls-00.txt · ietf_drafts · LINK-BUNDLING-MIB

Source file: Download draft-ietf-mpls-bundle-mib-04 — Link Bundling Management Information Base · Publisher's file

Related source files and packages:

Show more related files and packages

Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-04; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.

Source data warning: Qualified interim interpretation: this draft leaves the permanent root as { mib-2 xxx }, but explicitly says experimental 114 can be used in the interim. The earlier -03 draft independently declares that experimental root. This record follows only that published experimental alternative; no permanent mib-2 allocation is inferred. The original unassigned clause and both editions remain available.

Source file: Download draft-ietf-mpls-bundle-mib-03 — Link Bundling Management Information Base · Publisher's file

Related source files and packages:

Related link-bundling draft edition 04

Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-03; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.

Source file: Download LINK-BUNDLING-MIB-mpls-00.txt

Browse all files from MIBdepot

Historical records

Additional source information

Information from MIBdepot

teLinkBandwidthEntry OBJECT-TYPE
   SYNTAX        TeLinkBandwidthEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table contains information about
        the priority-based bandwidth of TE links. An ifEntry in the
        ifTable must exist before a teLinkBandwidthEntry using the
        same ifIndex is created. If a TE link entry in the ifTable
        is destroyed, then so are all entries in the teLinkBandwidthTable
        that use the ifIndex of this TE link."
   INDEX         { ifIndex, teLinkPriority }
   ::= { teLinkBandwidthTable 1 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.3.114)

Dubuc Martin

Current Registration Authority (inferred from ancestor 1.3.6.1.3)

Internet Assigned Numbers Authority

Direct children (5)

OID	Name	Description
1.3.6.1.3.114.1.5.1.1	teLinkPriority	This attribute specifies the priority. It should be mapped to a number between 0 and 7
1.3.6.1.3.114.1.5.1.2	teLinkUnreservedBandwidth	This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p…
1.3.6.1.3.114.1.5.1.3	teLinkMaximumLspBandwidth	This attribute specifies the TE link maximum LSP bandwidth at priority p. It is the maximum of all maximum LSP bandwidth at prior…
1.3.6.1.3.114.1.5.1.4	teLinkBandwidthRowStatus	This variable is used to create, modify, and/or delete a row in this table.
1.3.6.1.3.114.1.5.1.5	teLinkBandwidthStorageType	This variable indicates the storage type for this object.