OID reference

mplsVpnVrfRouteType

1.3.6.1.3.118.1.4.1.1.9

Description

The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for that the next hop is not the final destination. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored int…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.3.118.1.4.1.1 (mplsVpnVrfRouteEntry)
Node code
9
Node name
mplsVpnVrfRouteType
Category
SNMP management object
Numeric OID
1.3.6.1.3.118.1.4.1.1.9
URN notation
urn:oid:1.3.6.1.3.118.1.4.1.1.9
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 3 118 1 4 1 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) mplsVpnMIB(118) mplsVpnObjects(1) mplsVpnRoute(4) mplsVpnVrfRouteTable(1) mplsVpnVrfRouteEntry(1) mplsVpnVrfRouteType(9)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) mplsVpnMIB(118) mplsVpnObjects(1) mplsVpnRoute(4) mplsVpnVrfRouteTable(1) mplsVpnVrfRouteEntry(1) mplsVpnVrfRouteType(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) mplsVpnMIB(118) mplsVpnObjects(1) mplsVpnRoute(4) mplsVpnVrfRouteTable(1) mplsVpnVrfRouteEntry(1) mplsVpnVrfRouteType(9)}
  • {iso(1) iso-organization(3) dod(6) internet(1) experimental(3) mplsVpnMIB(118) mplsVpnObjects(1) mplsVpnRoute(4) mplsVpnVrfRouteTable(1) mplsVpnVrfRouteEntry(1) mplsVpnVrfRouteType(9)}
OID-IRI notation
  • /1/3/6/1/3/118/1/4/1/1/9
  • /ISO/Identified-Organization/6/1/3/118/1/4/1/1/9
  • /ISO/3/6/1/3/118/1/4/1/1/9
Named path variants
  • /iso/identified-organization/dod/internet/experimental/mplsVpnMIB/mplsVpnObjects/mplsVpnRoute/mplsVpnVrfRouteTable/mplsVpnVrfRouteEntry/mplsVpnVrfRouteType
  • /iso/org/dod/internet/experimental/mplsVpnMIB/mplsVpnObjects/mplsVpnRoute/mplsVpnVrfRouteTable/mplsVpnVrfRouteEntry/mplsVpnVrfRouteType
  • /iso/iso-identified-organization/dod/internet/experimental/mplsVpnMIB/mplsVpnObjects/mplsVpnRoute/mplsVpnVrfRouteTable/mplsVpnVrfRouteEntry/mplsVpnVrfRouteType
  • /iso/iso-organization/dod/internet/experimental/mplsVpnMIB/mplsVpnObjects/mplsVpnRoute/mplsVpnVrfRouteTable/mplsVpnVrfRouteEntry/mplsVpnVrfRouteType

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-create, read-write
Status in MIB
current, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Cisco, MIBdepot, and others

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Variant 2 — Cisco SMIv1

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.

ValueName and source notesSource variants
1other
not specified
1, 2
2reject
route to discard traffic
1, 2
3local
local interface
1, 2
4remote
remote destination
1, 2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: mplsVpnVrfName, mplsVpnVrfRouteDest, mplsVpnVrfRouteMask, mplsVpnVrfRouteTos, mplsVpnVrfRouteNextHop.

snmpwalk [connection options] DEVICE .1.3.6.1.3.118.1.4.1.1.9

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

N5860-48SC, N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF.

Show 11 more models

S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC.

A definition in a model's MIB package does not establish that the device implements it or permits access.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination; remote(4) refers to a route for
that the next hop is not the final destination.
Routes which do not result in traffic forwarding or
rejection should not be displayed even if the
implementation keeps them stored internally.

reject (2) refers to a route which, if matched,
discards the message as unreachable. This is used
in some protocols as a means of correctly aggregating
routes.
Sources for this description

Circitor

Parsed from MPLS-VPN-MIB.mib · MPLS-VPN-MIB

Source file: Download MPLS-VPN-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download draft-ietf-l3vpn-mpls-vpn-mib-01 — MPLS/BGP Layer 3 Virtual Private Network (VPN) Management Information Base · Publisher's file

Source data warning: Historical Internet-Draft draft-ietf-l3vpn-mpls-vpn-mib-01; current Datatracker states: RFC, RFC Published. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.

Source file: Download MPLS-VPN-MIB.my · Publisher's file

Vendor MIB copy from the Netdisco archive.

Source file: Download MPLS-VPN-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive. Cisco support.

Related source files and packages:

Source file: Download MPLS-VPN-MIB · Publisher's file

Vendor MIB copy from the LibreNMS archive.

Source file: Download MPLS-VPN-MIB-DRAFT-05.mib · Publisher's file

Other official packages with the same file

s3100-16tf-switch-snmp-mib-files.zip

s5860-series-swithes-snmp-mib-files.zip

s3910-series-swithes-snmp-mib-files.zip

s3410-series-swithes-snmp-mib-files.zip

Source file: Download MPLS-VPN-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive.

Source file: Download MPLS-VPN-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive.

Source file: Download l3vpnmib.txt · Publisher's file Junos OS Evolved 26.2R1

Other official packages with the same file

Junos OS 26.2R1

Source file: Download MPLS-VPN-MIB.my · Publisher's file

Browse all files from Cisco

Historical records

Additional source information

Information from Circitor
mplsVpnVrfRouteType  OBJECT-TYPE
      SYNTAX  INTEGER { other  (1), 
                        reject (2), 
                        local  (3), 
                        remote (4)  
                      }
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The type of route.  Note that local(3)  refers
           to a route for which the next hop is the final
           destination; remote(4) refers to a route for
           that the next  hop is not the final destination.
           Routes which do not result in traffic forwarding or
           rejection should not be displayed even if the
           implementation keeps them stored internally.

           reject (2) refers to a route which, if matched,
           discards the message as unreachable. This is used
           in some protocols as a means of correctly aggregating
           routes."
      ::= { mplsVpnVrfRouteEntry 9 }
Information from Cisco SMIv1
mplsVpnVrfRouteType OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        reject(2),
        local(3),
        remote(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of route.  Note that local(3)  refers
         to a route for which the next hop is the final
         destination; remote(4) refers to a route for
         that the next  hop is not the final destination.
         Routes which do not result in traffic forwarding or
         rejection should not be displayed even if the
         implementation keeps them stored internally.
        
         reject (2) refers to a route which, if matched,
         discards the message as unreachable. This is used
         in some protocols as a means of correctly aggregating
         routes."
    ::= { mplsVpnVrfRouteEntry 9 }
Information from OID Repository
Vendor: Cisco Systems
Module: MPLS-VPN-MIB (MPLS-VPN-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: INTEGER

Automatically extracted from www.mibdepot.com
Information from MIBdepot
mplsVpnVrfRouteType  OBJECT-TYPE
      SYNTAX  INTEGER { other  (1), 
                        reject (2), 
                        local  (3), 
                        remote (4)  
                      }
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The type of route.  Note that local(3)  refers
           to a route for which the next hop is the final
           destination; remote(4) refers to a route for
           that the next  hop is not the final destination.
           Routes which do not result in traffic forwarding or
           rejection should not be displayed even if the
           implementation keeps them stored internally.

           reject (2) refers to a route which, if matched,
           discards the message as unreachable. This is used
           in some protocols as a means of correctly aggregating
           routes."
      ::= { mplsVpnVrfRouteEntry 9 }
Information from Cisco
mplsVpnVrfRouteType  OBJECT-TYPE
      SYNTAX  INTEGER { other  (1), 
                        reject (2), 
                        local  (3), 
                        remote (4)  
                      }
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The type of route.  Note that local(3)  refers
           to a route for which the next hop is the final
           destination; remote(4) refers to a route for
           that the next  hop is not the final destination.
           Routes which do not result in traffic forwarding or
           rejection should not be displayed even if the
           implementation keeps them stored internally.

           reject (2) refers to a route which, if matched,
           discards the message as unreachable. This is used
           in some protocols as a means of correctly aggregating
           routes."
      ::= { mplsVpnVrfRouteEntry 9 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.3.118)

Nadeau Thomas D.

Current Registration Authority (inferred from ancestor 1.3.6.1.3)

Internet Assigned Numbers Authority

Siblings (20)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.3.118.1.4.1.1.1 mplsVpnVrfRouteDest, mplsVpnVrfRouteDestAddrType00 The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.

Any assignment (implicit o…
1.3.6.1.3.118.1.4.1.1.2 mplsVpnVrfRouteDestAddrType, mplsVpnVrfRouteDest00 The address type of the mplsVpnVrfRouteDest
entry.
1.3.6.1.3.118.1.4.1.1.3 mplsVpnVrfRouteMask, mplsVpnVrfRouteMaskAddrType00 Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the mplsVpnVrfRout…
1.3.6.1.3.118.1.4.1.1.4 mplsVpnVrfRouteMaskAddrType, mplsVpnVrfRouteMask00 The address type of mplsVpnVrfRouteMask.
1.3.6.1.3.118.1.4.1.1.5 mplsVpnVrfRouteTos00 The IP TOS Field is used to specify the policy to
be applied to this route. The encoding of IP TOS
is as specified by the fol…
1.3.6.1.3.118.1.4.1.1.6 mplsVpnVrfRouteNextHop, mplsVpnVrfRouteNextHopAddrType00 On remote routes, the address of the next
system en route; Otherwise, 0.0.0.0. .
1.3.6.1.3.118.1.4.1.1.7 mplsVpnVrfRouteNextHopAddrType, mplsVpnVrfRouteNextHop00 The address type of the mplsVpnVrfRouteNextHopAddrType
object.
1.3.6.1.3.118.1.4.1.1.8 mplsVpnVrfRouteIfIndex00 The ifIndex value that identifies the local
interface through which the next hop of this
route should be reached.
1.3.6.1.3.118.1.4.1.1.10 mplsVpnVrfRouteProto00 The routing mechanism via which this route was
learned. Inclusion of values for gateway rout-
ing protocols is not intended to…
1.3.6.1.3.118.1.4.1.1.11 mplsVpnVrfRouteAge00 The number of seconds since this route was
last updated or otherwise determined to be
correct. Note that no semantics of `too old…
1.3.6.1.3.118.1.4.1.1.12 mplsVpnVrfRouteInfo00 A reference to MIB definitions specific to the
particular routing protocol which is responsi-


ble for this route, as determined b…
1.3.6.1.3.118.1.4.1.1.13 mplsVpnVrfRouteNextHopAS00 The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in th…
1.3.6.1.3.118.1.4.1.1.14 mplsVpnVrfRouteMetric100 The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the …
1.3.6.1.3.118.1.4.1.1.15 mplsVpnVrfRouteMetric200 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the…
1.3.6.1.3.118.1.4.1.1.16 mplsVpnVrfRouteMetric300 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the…
1.3.6.1.3.118.1.4.1.1.17 mplsVpnVrfRouteMetric400 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the…
1.3.6.1.3.118.1.4.1.1.18 mplsVpnVrfRouteMetric500 An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the…
1.3.6.1.3.118.1.4.1.1.19 mplsVpnVrfRouteRowStatus, mplsVpnVrfRouteXCPointer00 Row status for this table. It is used according
to row installation and removal conventions.
1.3.6.1.3.118.1.4.1.1.20 mplsVpnVrfRouteStorageType, mplsVpnVrfRouteRowStatus00 Storage type value.
1.3.6.1.3.118.1.4.1.1.21 mplsVpnVrfRouteStorageType00