OID reference
1.3.6.1.3.37.1.1.1.1.8
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
Identification
{1 3 6 1 3 37 1 1 1 1 8}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ISIS-MIB, the row index isisSysInstance is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.3.37.1.1.1.1.8.<isisSysInstance>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.3.37.1.1.1.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The FS.COM catalogue lists MIB packages containing this definition for these models:
N5860-48SC, N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF.
S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC.
A definition in a model's MIB package does not establish that the device implements it or permits access.
Available source records contain 4 distinct definitions; some records may not include a definition.
isisSysPollESHelloRate OBJECT-TYPE
SYNTAX Unsigned16TC (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration."
REFERENCE "{ISIS.aoi pollESHelloRate (13)}"
DEFVAL { 50 }
::= { isisSysEntry 8 }isisSysMaxAreaAddresses OBJECT-TYPE
SYNTAX Integer32 (3..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of area addresses to be permitted for
the area in which this instance exists. Note that all
Intermediate Systems in the same area must have the same
value configured for this attribute if correct operation
is to be assumed. This object follows the
replaceOnlyWhileDisabled behaviour."
REFERENCE "ISIS.aoi maximumAreaAddresses (4)"
DEFVAL { 3 }
::= { isisSysEntry 8 }isisSysWaitTime OBJECT-TYPE
SYNTAX Unsigned16TC (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behavior."
REFERENCE "{ISIS.aoi waitingTime (15)}"
DEFVAL { 60 }
::= { isisSysEntry 8 }isisSysMaxAreaAddresses OBJECT-TYPE
SYNTAX Integer32 (3..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of area addresses to be permitted for
this instance of the protocol. Note that all
Intermediate Systems in the same area must have the same
value configured for this attribute if correct operation
is to be assumed. This object follows the
replaceOnlyWhileDisabled behavior."
REFERENCE "{ISIS.aoi maximumAreaAddresses (4)}"
DEFVAL { 3 }
::= { isisSysEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
D-Link official switch MIBsFS.COM official Documentation Hub native MIB packagesMIBdepot
Description 2
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.
Implementation notes: The actually supported access is read-create.
Huawei official enterprise MIB Query and object descriptions
Description 3
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. The value ranges from 1 to 65535 seconds. The default value is 60 seconds. It cannot be set up through device.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 4
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. The value ranges from 1 to 65535 seconds. The default value is 60 seconds. It cannot be set up through router.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 5
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 6
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. The value ranges from 1 to 65535 seconds. The default value is 60 seconds. It cannot be set up through wireless access controller.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 7
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. The value ranges from 1 to 65535 seconds. The default value is 60 seconds. It cannot be set up through switch.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 8
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.
Huawei MIB copies (LibreNMS/Observium Community)MIBdepot
Description 9
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.
Implementation notes: The actually supported access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 10
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.
Implementation notes: The actually supported access is read-createread-only.
Huawei official enterprise MIB Query and object descriptions
Description 11
The maximum number of area addresses to be permitted for this instance of the protocol. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behavior.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Belden, GarrettCom and Hirschmann IT official standalone MIBs
Description 12
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.
Implementation notes: The actually supported access is read-only
Huawei official enterprise MIB Query and object descriptions
Description 13
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior. The value ranges from 1 to 65535 seconds. The default value is 60 seconds. It cannot be set up through industrial switch router.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: isisSysPollESHelloRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisSysPollESHelloRate",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned16TC",
"(",
"1",
".",
".",
"65535",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.\"",
"REFERENCE",
"\"{ISIS.aoi pollESHelloRate (13)}\"",
"DEFVAL",
"{",
"50",
"}",
"::=",
"{",
"isisSysEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Unsigned16TC",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration."
],
[
"REFERENCE",
"{ISIS.aoi pollESHelloRate (13)}"
],
null,
null,
[
"DEFVAL",
50
]
]
}Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610-MIB.rar.
Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Same file in s3410-series-swithes-snmp-mib-files.zip.
Description 2 · Description 8 · Description 9 · Description 10 · Description 12
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32{(1,65535)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-create."
}Module: ISIS-MIB
· Download Huawei MIB Query — ISIS-MIB (derived data index)Related source files and packages:
Status in source: current.
Names: isisSysWaitTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisSysWaitTime",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned16TC",
"(",
"1",
".",
".",
"65535",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior.\"",
"REFERENCE",
"\"{ISIS.aoi waitingTime (15)}\"",
"DEFVAL",
"{",
"60",
"}",
"::=",
"{",
"isisSysEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Unsigned16TC",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behavior."
],
[
"REFERENCE",
"{ISIS.aoi waitingTime (15)}"
],
null,
null,
[
"DEFVAL",
60
]
]
}Module: ISIS-MIB
See published definition above
{'IF-MIB': ['ifName'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'RFC1213-MIB': ['ifEntry', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'HUAWEI-ISIS-CONF-MIB': ['hwIsisAdjChangeReason']}Vendor MIB copy from the Observium Community archive. Huawei support.
Module: ISIS-MIB
{'IF-MIB': ['ifName'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'RFC1213-MIB': ['ifEntry', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32{(1,65535)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32{(1,65535)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-createread-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32{(1,65535)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-only"
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "INTEGER (0..4294967295)",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: current.
Names: isisSysMaxAreaAddresses
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisSysMaxAreaAddresses",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"3",
".",
".",
"254",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.\"",
"REFERENCE",
"\"ISIS.aoi maximumAreaAddresses (4)\"",
"DEFVAL",
"{",
"3",
"}",
"::=",
"{",
"isisSysEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
3,
254
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour."
],
[
"REFERENCE",
"ISIS.aoi maximumAreaAddresses (4)"
],
null,
null,
[
"DEFVAL",
3
]
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "INTEGER (0..4294967295)",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "INTEGER (0..4294967295)",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: current.
Names: isisSysMaxAreaAddresses
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisSysMaxAreaAddresses",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"3",
".",
".",
"254",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The maximum number of area addresses to be permitted for this instance of the protocol. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behavior.\"",
"REFERENCE",
"\"{ISIS.aoi maximumAreaAddresses (4)}\"",
"DEFVAL",
"{",
"3",
"}",
"::=",
"{",
"isisSysEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
3,
254
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The maximum number of area addresses to be permitted for this instance of the protocol. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behavior."
],
[
"REFERENCE",
"{ISIS.aoi maximumAreaAddresses (4)}"
],
null,
null,
[
"DEFVAL",
3
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: unspecified.
Names: isisSysWaitTime
{
"syntax": "Unsigned32",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Historical records
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.37.1.1.1.1.1 | isisSysInstance | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.2 | isisSysVersion | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.3 | isisSysType | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.4 | isisSysID | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.5 | isisSysMaxPathSplits | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.6 | isisSysMaxLSPGenInt | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.7 | isisSysMaxAreaAddresses, isisSysPollESHelloRate, isisSysOrigL1LSPBuffSize | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.9 | isisSysWaitTime, isisSysAdminState, isisSysMinL1LSPGenInt | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.10 | isisSysAdminState, isisSysLogAdjacencyChanges, isisSysMinL2LSPGenInt | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.11 | isisSysLogAdjacencyChanges, isisSysNextCircIndex, isisSysPollESHelloRate | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.12 | isisSysNextCircIndex, isisSysL2toL1Leaking, isisSysWaitTime | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.13 | isisSysL2toL1Leaking, isisSysMaxAge, isisSysAdminState | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.14 | isisSysMaxAge, isisSysReceiveLSPBufferSize, isisSysL1State | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.15 | isisSysReceiveLSPBufferSize, isisSysExistState, isisSysCorrLSPs, isisSysOrigL2LSPBuffSize | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.16 | isisSysExistState, isisSysLSPL1DbaseOloads, isisSysL2State | 0 | 0 | |
| 1.3.6.1.3.37.1.1.1.1.17 | isisSysManAddrDropFromAreas, isisSysLogAdjacencyChanges | 0 | 0 | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.3.37.1.1.1.1.18 | isisSysAttmptToExMaxSeqNums, isisSysMaxAreaCheck | 0 | 0 | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.3.37.1.1.1.1.19 | isisSysSeqNumSkips, isisSysNextCircIndex | 0 | 0 | Number of times a sequence number skip has occurred. |
| 1.3.6.1.3.37.1.1.1.1.20 | isisSysOwnLSPPurges, isisSysExistState | 0 | 0 | Number of times a zero-aged copy of the system\s own LSP is received from some other node. |
| 1.3.6.1.3.37.1.1.1.1.21 | isisSysIDFieldLenMismatches, isisSysL2toL1Leaking | 0 | 0 | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.3.37.1.1.1.1.22 | isisSysMaxAreaAddrMismatches, isisSysSetOverload | 0 | 0 | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| 1.3.6.1.3.37.1.1.1.1.23 | isisSysOrigL2LSPBuffSize, isisSysL1MetricStyle | 0 | 0 | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.3.37.1.1.1.1.24 | isisSysL2State, isisSysL1SPFConsiders | 0 | 0 | The state of the Level 2 database. |
| 1.3.6.1.3.37.1.1.1.1.25 | isisSysLSPL2DbaseOloads, isisSysL2MetricStyle | 0 | 0 | Number of times the Level 2 LSP database has become overloaded. |
| 1.3.6.1.3.37.1.1.1.1.26 | isisSysAuthFails, isisSysL2SPFConsiders | 0 | 0 | The number of authentication failures recognized by this instance of the protocol. |
| 1.3.6.1.3.37.1.1.1.1.27 | isisSysLSPIgnoreErrors, isisSysTEEnabled | 0 | 0 | If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than… |
| 1.3.6.1.3.37.1.1.1.1.28 | isisSysLogAdjacencyChanges, isisSysMaxAge | 0 | 0 | If true, causes IS-IS to generate a log message when an IS-IS adjacency changes state (up or down). |
| 1.3.6.1.3.37.1.1.1.1.29 | isisSysPartChanges, isisSysReceiveLSPBufferSize | 0 | 0 | partition changes |
| 1.3.6.1.3.37.1.1.1.1.30 | isisSysMaxAreaCheck | 0 | 0 | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| 1.3.6.1.3.37.1.1.1.1.31 | isisSysNextCircIndex | 0 | 0 | This object is used to assign values to isisCircIndex as described in \Textual Conventions for SNMPv2\. The network manager rea… |
| 1.3.6.1.3.37.1.1.1.1.32 | isisSysExistState | 0 | 0 | The state of the ISIS router. Turning this off forces the router to forget all current state |
| 1.3.6.1.3.37.1.1.1.1.33 | isisSysL2toL1Leaking | 0 | 0 | If true, allow the router to leak L2 routes into L1. |
| 1.3.6.1.3.37.1.1.1.1.34 | isisSysSetOverload | 0 | 0 | Administrativly set the overload bit for each level. The overload bit will continue to be set if the implementation runs out of… |