OID reference

msdpPeerStatus

1.3.6.1.3.92.1.1.5.1.25

Description

The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP Start Event to be generated. A transition out of the 'active' state will cause the MSDP Stop Event to be generated. Care should be used in providing write access to this object without adequate authentication.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.3.92.1.1.5.1 (msdpPeerEntry, msdpMeshGroupEntry)
Node code
25
Node name
msdpPeerStatus
Category
SNMP management object
Numeric OID
1.3.6.1.3.92.1.1.5.1.25
URN notation
urn:oid:1.3.6.1.3.92.1.1.5.1.25
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 3 92 1 1 5 1 25}

  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpPeerTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpPeerTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpMeshGroupTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpMeshGroupTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpSAStatePeriod(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdp(1) msdpSAStatePeriod(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpPeerTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpPeerTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpMeshGroupTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpMeshGroupTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpSAStatePeriod(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdpMIBobjects(1) msdpScalars(1) msdpSAStatePeriod(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdp(1) msdp(1) msdpPeerTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdp(1) msdp(1) msdpPeerTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdp(1) msdp(1) msdpMeshGroupTable(5) msdpPeerEntry(1) msdpPeerStatus(25)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) msdpMIB(92) msdp(1) msdp(1) msdpMeshGroupTable(5) msdpMeshGroupEntry(1) msdpPeerStatus(25)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/3/92/1/1/5/1/25
  • /ISO/Identified-Organization/6/1/3/92/1/1/5/1/25
  • /ISO/3/6/1/3/92/1/1/5/1/25
Named path variants
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpPeerTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpPeerTable/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpMeshGroupTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpMeshGroupTable/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpSAStatePeriod/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdp/msdpSAStatePeriod/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpPeerTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpPeerTable/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpMeshGroupTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpMeshGroupTable/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpSAStatePeriod/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdpMIBobjects/msdpScalars/msdpSAStatePeriod/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdp/msdp/msdpPeerTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdp/msdp/msdpPeerTable/msdpMeshGroupEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdp/msdp/msdpMeshGroupTable/msdpPeerEntry/msdpPeerStatus
  • /iso/identified-organization/dod/internet/experimental/msdpMIB/msdp/msdp/msdpMeshGroupTable/msdpMeshGroupEntry/msdpPeerStatus
  • Additional combinations skipped.

SNMP properties

Value type
RowStatus
Maximum access defined by MIB
read-create, read-write
Status in MIB
current, mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — MIBdepot, Cisco, and others

Value type
RowStatus
Maximum access defined by MIB
read-create
Status in MIB
current

Variant 2 — Cisco SMIv1

Value type
RowStatus
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Product context

Documented MIB packages

The FS.COM catalogue lists MIB packages containing this definition for these models:

IES3220-8T4F, IES3220-8T4F-U, IES5120-28TF, IES5120-28TS, IES5120-28TS-P, IES5120-48T4S, IES5220-30TS-3ES, IES5220-6S-3ES, TSN3220-10S, TSN3220-10S-U.

A definition in a model's MIB package does not establish that the device implements it or permits access.

Meaning

Descriptions

8 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The RowStatus object by which peers can be added and deleted. A transition to active will cause the MSDP Start Event to be generated. A transition out of the active state will cause the MSDP Stop Event to be generated. Care should be used in providing write access to this object without adequate authentication.
Original text from OID Repository
msdpPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus object by which peers can be added and
deleted. A transition to active will cause the MSDP
Start Event to be generated. A transition out of the
active state will cause the MSDP Stop Event to be
generated. Care should be used in providing write
access to this object without adequate
authentication."
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from Cisco "SNMP v2 MIBs".

Description 2

The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
Start Event to be generated. A transition out of the
'active' state will cause the MSDP Stop Event to be
generated. Care should be used in providing write
access to this object without adequate
authentication.
Sources for this description

Circitor

Parsed from MSDP-MIB.mib · MSDP-MIB

Source file: Download MSDP-MIB.mib

Source file: Download DRAFT-MSDP-MIB.mib

Browse all files from Circitor

Cisco

Source file: Download MSDP-MIB.my · Publisher's file

Vendor MIB copy from the Netdisco archive.

Source file: Download DRAFT-MSDP-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive. Cisco support.

Related source files and packages:

Source file: Download MSDP-MIB.my · Publisher's file

Source file: Download MSDP-MIB.my.txt

Browse all files from Cisco

Description 3

The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated.
Care should be used in providing write access to this
object without adequate authentication.

msdpPeerRemoteAddress is the only variable that must be
set to a valid value before the row can be activated.
Since this is the table's INDEX, a row can be activated
by simply setting the msdpPeerStatus variable.

It is possible to modify other columns in the same
conceptual row when the status value is active(1).
Sources for this description

See 2 matching source records

MIBdepot

Source file: Download MSDP-MIB.txt · Publisher's file

Vendor MIB copy from the Netdisco archive.

Source file: Download rfc4624-msdp.mib · Publisher's file

Other official packages with the same file

tsn3220-10s-u-switch-snmp-mib-files.zip

tsn3220-10s-switch-snmp-mib-files.zip

ies5220-6s-3es-switch-snmp-mib-files.zip

ies5220-30ts-3es-switch-snmp-mib-files.zip

Source file: Download MSDP-MIB · Publisher's file

Vendor MIB copy from the Observium Community archive.

Related source files and packages:

Source file: Download MSDP-MIB.mib · Publisher's file

Other official packages with the same file

DGS-6600_MIB_4.10.009.zip

Source file: Download Msdp-mib.mib · Publisher's file

Other official packages with the same file

DXS-3610_A1_MIB_v1.01.zip

DXS-3600_32S_MIB_R2.40.zip

DXS-3600_32S_MIB_R2.40.zip

MIB.rar

Source file: Download RFC 4624 · Publisher's file · RFC errata

Source file: Download rfc4624-Multicast-Source-Discovery-Protocol-MSDP.mib.txt

Source file: Download MSDP-MIB.mib.txt

Browse all files from MIBdepot

Description 4

The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. msdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the msdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1).

Implementation notes: The actually supported access is read-only. Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned. When you perform the Get operation on this object, 1 is returned.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 5

The RowStatus object by which peers can be added and deleted.

Implementation notes: Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code "Generic error" is returned. When you perform the Get operation on this object, 1 is returned.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 6

The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. msdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the msdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1).

Implementation notes: The actually supported access is read-only Currently; the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object; an error code "Generic error" is returned. When you perform the Get operation on this object; 1 is returned.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 7

Add or delete a peer.

Sources for this description

H3C official MIB documentation and object descriptions

See 1 matching source record

Description 8

Currently, the. Set operation is not supported. If the Set operation is performed. to set the value within the range defined by the protocol for this. object, an error code "Generic error" is returned. When you. perform the Get operation on this object, 1 is returned.

Implementation notes: The actually supported access is read-only. Currently, the. Set operation is not supported. If the Set operation is performed. to set the value within the range defined by the protocol for this. object, an error code "Generic error" is returned. When you. perform the Get operation on this object, 1 is returned.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Evidence

Source records

6 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3, 4, 6Huawei official enterprise MIB Query and object descriptions2 records · 2 sources

Description 3 · Description 4 · Description 6

msdpPeerStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{
  "syntax": "INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The actually supported access is read-only. Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code \"Generic error\" is returned. When you perform the Get operation on this object, 1 is returned."
}
msdpPeerStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{
  "syntax": "INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The actually supported access is read-only Currently; the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object; an error code \"Generic error\" is returned. When you perform the Get operation on this object; 1 is returned."
}
Records for description 5Huawei official enterprise MIB Query and object descriptions2 records · 2 sources

Description 5

msdpPeerStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{
  "syntax": "RowStatus",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code \"Generic error\" is returned. When you perform the Get operation on this object, 1 is returned."
}
msdpPeerStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{
  "syntax": "INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "Currently, the Set operation is not supported. If the Set operation is performed to set the value within the range defined by the protocol for this object, an error code \"Generic error\" is returned. When you perform the Get operation on this object, 1 is returned."
}
Records for description 7H3C official MIB documentation and object descriptions1 record · 11 sources

Description 7

msdpPeerStatus · unspecifiedH3C official MIB documentation and object descriptions11 sources

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{}

Browse all 11 supporting sources

Records for description 8Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 8

msdpPeerStatus · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: msdpPeerStatus

Technical details
{
  "syntax": "INTEGER{(active,1),(notInService,2),(notReady,3),(createAndGo,4),(createAndWait,5),(destroy,6)}",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The actually supported access is read-only. Currently, the. Set operation is not supported. If the Set operation is performed. to set the value within the range defined by the protocol for this. object, an error code \"Generic error\" is returned. When you. perform the Get operation on this object, 1 is returned."
}

Historical records

Additional source information

Information from Circitor
msdpPeerStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The RowStatus object by which peers can be added and
            deleted.  A transition to 'active' will cause the MSDP
            Start Event to be generated.  A transition out of the
            'active' state will cause the MSDP Stop Event to be
            generated.  Care should be used in providing write
            access to this object without adequate
            authentication."
    ::= { msdpPeerEntry 25 }
Information from Cisco SMIv1
msdpPeerStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The RowStatus object by which peers can be added and
        deleted.  A transition to 'active' will cause the MSDP
        Start Event to be generated.  A transition out of the
        'active' state will cause the MSDP Stop Event to be
        generated.  Care should be used in providing write
        access to this object without adequate
        authentication."
    ::= { msdpPeerEntry 25 }
Information from MIBdepot
msdpPeerStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The RowStatus object by which peers can be added and
            deleted.  A transition to 'active' will cause the MSDP
            'Enable MSDP peering with P' Event to be generated.  A
            transition out of the 'active' state will cause the MSDP
            'Disable MSDP peering with P' Event to be generated.
            Care should be used in providing write access to this
            object without adequate authentication.

            msdpPeerRemoteAddress is the only variable that must be
            set to a valid value before the row can be activated.
            Since this is the table's INDEX, a row can be activated
            by simply setting the msdpPeerStatus variable.

            It is possible to modify other columns in the same
            conceptual row when the status value is active(1)."
    REFERENCE "RFC 3618 section 11.1"
    ::= { msdpPeerEntry 25 }
Information from Cisco
msdpPeerStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The RowStatus object by which peers can be added and
            deleted.  A transition to 'active' will cause the MSDP
            Start Event to be generated.  A transition out of the
            'active' state will cause the MSDP Stop Event to be
            generated.  Care should be used in providing write
            access to this object without adequate
            authentication."
    ::= { msdpPeerEntry 25 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.3)

Internet Assigned Numbers Authority

Siblings (33)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.3.92.1.1.5.1.1 msdpPeerRemoteAddress, msdpPeerAddressType, msdpMeshGroupName00 The address of the remote MSDP peer.
1.3.6.1.3.92.1.1.5.1.2 msdpMeshGroupPeerAddressType, msdpPeerConfigMethod00 How this peer was configured; manually (1) or via one
of the automatic mechanisms described in the MSDP
spec.
1.3.6.1.3.92.1.1.5.1.3 msdpPeerState, msdpMeshGroupPeerAddress00 The state of the MSDP TCP connection with this peer.
1.3.6.1.3.92.1.1.5.1.4 msdpPeerRPFFailures, msdpMeshGroupStatus00 The number of RPF failures on SA messages received
from this peer.
1.3.6.1.3.92.1.1.5.1.5 msdpPeerInSAs00 The number of MSDP SA messages received on this
connection. This object should be initialized to zero
when the connection is est…
1.3.6.1.3.92.1.1.5.1.6 msdpPeerOutSAs00 The number of MSDP SA messages transmitted on this
connection. This object should be initialized to zero
when the connection is …
1.3.6.1.3.92.1.1.5.1.7 msdpPeerInSARequests00 The number of MSDP SA-Request messages received on
this connection. This object should be initialized to
zero when the connectio…
1.3.6.1.3.92.1.1.5.1.8 msdpPeerOutSARequests00 The number of MSDP SA-Request messages transmitted on
this connection. This object should be initialized to
zero when the connec…
1.3.6.1.3.92.1.1.5.1.9 msdpPeerInSAResponses00 The number of MSDP SA-Response messages received on
this connection. This object should be initialized to
zero when the connecti…
1.3.6.1.3.92.1.1.5.1.10 msdpPeerOutSAResponses00 The number of MSDP SA Response messages transmitted
on this TCP connection. This object should be
initialized to zero when the c…
1.3.6.1.3.92.1.1.5.1.11 msdpPeerInControlMessages00 The total number of MSDP messages received on this
TCP connection. This object should be initialized to
zero when the connection…
1.3.6.1.3.92.1.1.5.1.12 msdpPeerOutControlMessages00 The total number of MSDP messages transmitted on this
TCP connection. This object should be initialized to
zero when the connect…
1.3.6.1.3.92.1.1.5.1.13 msdpPeerInDataPackets00 The total number of encapsulated data packets
received from this peer. This object should be
initialized to zero when the connec…
1.3.6.1.3.92.1.1.5.1.14 msdpPeerOutDataPackets00 The total number of encapsulated data packets sent to
this peer. This object should be initialized to zero
when the connection i…
1.3.6.1.3.92.1.1.5.1.15 msdpPeerFsmEstablishedTransitions00 The total number of times the MSDP FSM transitioned
into the established state.
1.3.6.1.3.92.1.1.5.1.16 msdpPeerFsmEstablishedTime00 This timer indicates how long (in seconds) this peer
has been in the Established state or how long since
this peer was last in th…
1.3.6.1.3.92.1.1.5.1.17 msdpPeerInMessageElapsedTime, msdpPeerInMessageTime00 Elapsed time in seconds since the last MSDP message
was received from the peer. Each time
msdpPeerInControlMessages is increment…
1.3.6.1.3.92.1.1.5.1.18 msdpPeerLocalAddress00 The local IP address of this entry's MSDP
connection.
1.3.6.1.3.92.1.1.5.1.19 msdpPeerSAAdvPeriod00 Time interval in seconds for the
MinSAAdvertisementInterval MSDP timer.
1.3.6.1.3.92.1.1.5.1.20 msdpPeerConnectRetryInterval00 Time interval in seconds for the ConnectRetry timer.
1.3.6.1.3.92.1.1.5.1.21 msdpPeerHoldTimeConfigured00 Time interval in seconds for the Hold Timer
configured for this MSDP speaker with this peer.
1.3.6.1.3.92.1.1.5.1.22 msdpPeerKeepAliveConfigured00 Time interval in seconds for the KeepAlive timer
configured for this MSDP speaker with this peer. A
reasonable maximum value for…
1.3.6.1.3.92.1.1.5.1.23 msdpPeerDataTtl00 The minimum TTL a packet is required to have before
it may be forwarded using SA encapsulation to this
peer.
1.3.6.1.3.92.1.1.5.1.24 msdpPeerProcessRequestsFrom00 This object indicates whether or not to process MSDP
SA Request messages from this peer. If True(1), MSDP
SA Request messages fr…
1.3.6.1.3.92.1.1.5.1.26 msdpPeerRemotePort00 The remote port for the TCP connection between the
MSDP peers.
1.3.6.1.3.92.1.1.5.1.27 msdpPeerLocalPort00 The local port for the TCP connection between the
MSDP peers.
1.3.6.1.3.92.1.1.5.1.28 msdpPeerEncapsulationState00 The status of the encapsulation negotiation state
machine.
1.3.6.1.3.92.1.1.5.1.29 msdpPeerEncapsulationType00 The encapsulation in use when encapsulating data in
SA messages to this peer.
1.3.6.1.3.92.1.1.5.1.30 msdpPeerConnectionAttempts00 The number of times the state machine has
transitioned from inactive to connecting.
1.3.6.1.3.92.1.1.5.1.31 msdpPeerInNotifications00 The number of MSDP Notification messages received on
this connection. This object should be initialized to
zero when the connect…
1.3.6.1.3.92.1.1.5.1.32 msdpPeerOutNotifications, msdpPeerIfIndex00 The number of MSDP Notification messages transmitted
on this connection. This object should be initialized
to zero when the conn…
1.3.6.1.3.92.1.1.5.1.33 msdpPeerLastError, msdpPeerDiscontinuityTime00 The last error code and subcode seen by this peer on
this connection. If no error has occurred, this field
is zero. Otherwise, …
1.3.6.1.3.92.1.1.5.1.34 msdpPeerDiscontinuityTime00 The value of sysUpTime on the most recent occasion at
which one or more of this entry's counters suffered a
discontinuity. See t…