Status in source: current.
Names: dot1qFutureGarpDebug
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1qFutureGarpDebug",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1048575",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enables the tracing in the selected submodule in GARP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace. Different submodule Tracing - BIT 16 - Tracing in GARP module. BIT 17 - Tracing in GMRP module. BIT 18 - Tracing in GVRP module. BIT 19 - Tracing in GARP redundancy module. The remaining bits are reserved. The combination of levels and submodules are allowed i.e. Tracing can be allowed at all failure and data path level in All submodules by setting the BIT appropriately. For Example, setting the debug value to the following bit stream, 00000000000000010000000000000100 will enable data path trace prints in GARP module. Multiple submodules and multiple levels can be combined by setting the corresponding bits. For Example, setting the debug value to the following bit stream, 00000000000001010000000000001100 will enable data path and control plane trace prints in GARP and GVRP modules. Note : BIT0 is the least significant bit and BIT31 is the most significant bit.\"",
"::=",
"{",
"dot1qFutureVlan",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1048575
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enables the tracing in the selected submodule in GARP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management trace. BIT 2 - Data path trace. BIT 3 - Control Plane trace. BIT 4 - Packet Dump. BIT 5 - OS Resource trace. BIT 6 - All Failure trace (All failures including Packet Validation) BIT 7 - Buffer Trace. Different submodule Tracing - BIT 16 - Tracing in GARP module. BIT 17 - Tracing in GMRP module. BIT 18 - Tracing in GVRP module. BIT 19 - Tracing in GARP redundancy module. The remaining bits are reserved. The combination of levels and submodules are allowed i.e. Tracing can be allowed at all failure and data path level in All submodules by setting the BIT appropriately. For Example, setting the debug value to the following bit stream, 00000000000000010000000000000100 will enable data path trace prints in GARP module. Multiple submodules and multiple levels can be combined by setting the corresponding bits. For Example, setting the debug value to the following bit stream, 00000000000001010000000000001100 will enable data path and control plane trace prints in GARP and GVRP modules. Note : BIT0 is the least significant bit and BIT31 is the most significant bit."
],
null,
null,
null,
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: SUPERMICRO-VLAN-MIB
See published definition above
Module imports
{'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION', 'MacAddress', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Unsigned32', 'enterprises', 'NOTIFICATION-TYPE', 'Counter32', 'IpAddress'], 'Q-BRIDGE-MIB': ['dot1qTpFdbPort', 'dot1qStaticUnicastEntry', 'dot1qVlanStaticEntry', 'VlanIdOrNone', 'dot1qTpFdbEntry', 'PortList']}
Related source files and packages: