OID reference
1.3.6.1.4.1.10876.101.2.72.3.2
MAXIMUM permissible time allowed to negotiate the FORWARDING/ SWITCHOVER status with peer PEs. After expiry of this time operator notification will be triggered.
Identification
{1 3 6 1 4 1 10876 101 2 72 3 2}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.10876.101.2.72.3.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
fsL2VpnPwRedNegotiationTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAXIMUM permissible time allowed to negotiate the FORWARDING/
SWITCHOVER status with peer PEs. After expiry of this time operator
notification will be triggered."
DEFVAL { 60 }
::= { pwRedundancyScalar 2 }fsG8261TsAccuracy OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the current value of the time difference scalednanoseconds
between a master and a slave as computed by the slave.
The time interval field represents the values in scalednanoseconds.
The scalednanoseconds member is the time interval expressed in
units of nanoseconds and multiplied by 2^16.
Positive or negative time intervals outside the maximum range of
this data type shall be encoded as the largest positive and
negative values of this data type, respectively. For example, 2.5
nanoseconds, will be expressed as 2.5 * 2^16 and the value
converted to hexadecimal that will obviously evolve to
0000 0000 0002 8000 base 16."
::= { fsG8261TsOutput 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
MAXIMUM permissible time allowed to negotiate the FORWARDING/ SWITCHOVER status with peer PEs. After expiry of this time operator notification will be triggered.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of this data type, respectively. For example, 2.5 nanoseconds, will be expressed as 2.5 * 2^16 and the value converted to hexadecimal that will obviously evolve to 0000 0000 0002 8000 base 16.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsL2VpnPwRedNegotiationTimeOut
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsL2VpnPwRedNegotiationTimeOut",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"65535",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"MAXIMUM permissible time allowed to negotiate the FORWARDING/ SWITCHOVER status with peer PEs. After expiry of this time operator notification will be triggered.\"",
"DEFVAL",
"{",
"60",
"}",
"::=",
"{",
"pwRedundancyScalar",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"MAXIMUM permissible time allowed to negotiate the FORWARDING/ SWITCHOVER status with peer PEs. After expiry of this time operator notification will be triggered."
],
null,
null,
null,
[
"DEFVAL",
60
]
]
}Vendor MIB copy from the Observium Community archive.
Module: SUPERMICRO-L2VPN-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus', 'StorageType', 'TEXTUAL-CONVENTION'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'enterprises', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PW-TC-STD-MIB': ['PwIndexOrZeroType', 'PwIDType', 'PwGroupID', 'PwOperStatusTC'], 'MPLS-TC-STD-MIB': ['MplsLdpIdentifier', 'MplsLsrIdentifier'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: fsG8261TsAccuracy
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsG8261TsAccuracy",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of this data type, respectively. For example, 2.5 nanoseconds, will be expressed as 2.5 * 2^16 and the value converted to hexadecimal that will obviously evolve to 0000 0000 0002 8000 base 16.\"",
"::=",
"{",
"fsG8261TsOutput",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the largest positive and negative values of this data type, respectively. For example, 2.5 nanoseconds, will be expressed as 2.5 * 2^16 and the value converted to hexadecimal that will obviously evolve to 0000 0000 0002 8000 base 16."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SUPERMICRO-G8261TS-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Unsigned32', 'Integer32']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.72.3.1 | fsL2VpnPwRedundancyStatus, fsG8261TsMeanVariance | 0 | 0 | |
| 1.3.6.1.4.1.10876.101.2.72.3.3 | fsL2VpnPwRedundancySyncFailNotifyEnable, fsG8261TsDelay | 0 | 0 | |
| 1.3.6.1.4.1.10876.101.2.72.3.4 | fsL2VpnPwRedundancyPwStatusNotifyEnable | 0 | 0 |