OID reference
1.3.6.1.4.1.11.2.110.1.1.6.1.3
The integer value is used to identify the interface number (port, trunk or vlan) that the port will advertise its management addresses. Value 0 means that the management address will be taken from the port that advertise.
Identification
{1 3 6 1 4 1 11 2 110 1 1 6 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: lldpPortConfigEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.110.1.1.6.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlLldpPortConfigAutoAdvManAddrOwnerIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The integer value is used to identify the interface number
(port, trunk or vlan) that the port will advertise its management addresses.
Value 0 means that the management address will be taken from the port that advertise."
DEFVAL { 0 }
::= { rlLldpPortConfigEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The integer value is used to identify the interface number (port, trunk or vlan) that the port will advertise its management addresses. Value 0 means that the management address will be taken from the port that advertise.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlLldpPortConfigAutoAdvManAddrOwnerIfId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlLldpPortConfigAutoAdvManAddrOwnerIfId",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The integer value is used to identify the interface number (port, trunk or vlan) that the port will advertise its management addresses. Value 0 means that the management address will be taken from the port that advertise.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlLldpPortConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The integer value is used to identify the interface number (port, trunk or vlan) that the port will advertise its management addresses. Value 0 means that the management address will be taken from the port that advertise."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-LLDP-MIB
See published definition above
{'HPE-MIB': ['nm', 'rndNotifications'], 'LLDP-MIB': ['LldpPortList', 'LldpPortNumber', 'LldpManAddress', 'lldpRemEntry', 'lldpPortConfigEntry', 'lldpPortConfigPortNum', 'lldpRemTimeMark', 'lldpRemLocalPortNum', 'lldpRemIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE'], 'LLDP-V2-MIB': ['lldpV2LocPortIfIndex', 'lldpV2RemLocalIfIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DIFFSERV-DSCP-TC': ['Dscp'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetVersion'], 'LLDP-EXT-MED-MIB': ['LldpXMedCapabilities'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-LLDP-MIB
{'HPE-MIB': ['nm', 'rndNotifications'], 'LLDP-MIB': ['LldpPortList', 'LldpPortNumber', 'LldpManAddress', 'lldpRemEntry', 'lldpPortConfigEntry', 'lldpPortConfigPortNum', 'lldpRemTimeMark', 'lldpRemLocalPortNum', 'lldpRemIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE'], 'LLDP-V2-MIB': ['lldpV2LocPortIfIndex', 'lldpV2RemLocalIfIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DIFFSERV-DSCP-TC': ['Dscp'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetVersion'], 'LLDP-EXT-MED-MIB': ['LldpXMedCapabilities'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.110.1.1.6.1.1 | rlLldpPortConfig4wireTxEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.1.6.1.2 | rlLldpPortConfigAdvManAddrMode | 0 | 0 |