OID reference
1.3.6.1.4.1.11.2.110.1.2.1.1.7
A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP…
Identification
{1 3 6 1 4 1 11 2 110 1 2 1 1 7}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlLldpXMedLocMediaPolicyContainerTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevance "
REFERENCE
" ANSI/TIA-1057, Section 10.2.3.3"
DEFVAL { false }
::= { rlLldpXMedLocMediaPolicyContainerEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlLldpXMedLocMediaPolicyContainerTagged
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlLldpXMedLocMediaPolicyContainerTagged",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance \"",
"REFERENCE",
"\" ANSI/TIA-1057, Section 10.2.3.3\"",
"DEFVAL",
"{",
"false",
"}",
"::=",
"{",
"rlLldpXMedLocMediaPolicyContainerEntry",
"7",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance"
],
[
"REFERENCE",
"ANSI/TIA-1057, Section 10.2.3.3"
],
null,
null,
[
"DEFVAL",
"false"
]
]
}Module: HPE-LLDP-MIB
See published definition above
{'HPE-MIB': ['nm', 'rndNotifications'], 'LLDP-MIB': ['LldpPortList', 'LldpPortNumber', 'LldpManAddress', 'lldpRemEntry', 'lldpPortConfigEntry', 'lldpPortConfigPortNum', 'lldpRemTimeMark', 'lldpRemLocalPortNum', 'lldpRemIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE'], 'LLDP-V2-MIB': ['lldpV2LocPortIfIndex', 'lldpV2RemLocalIfIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DIFFSERV-DSCP-TC': ['Dscp'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetVersion'], 'LLDP-EXT-MED-MIB': ['LldpXMedCapabilities'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-LLDP-MIB
{'HPE-MIB': ['nm', 'rndNotifications'], 'LLDP-MIB': ['LldpPortList', 'LldpPortNumber', 'LldpManAddress', 'lldpRemEntry', 'lldpPortConfigEntry', 'lldpPortConfigPortNum', 'lldpRemTimeMark', 'lldpRemLocalPortNum', 'lldpRemIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE'], 'LLDP-V2-MIB': ['lldpV2LocPortIfIndex', 'lldpV2RemLocalIfIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DIFFSERV-DSCP-TC': ['Dscp'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetVersion'], 'LLDP-EXT-MED-MIB': ['LldpXMedCapabilities'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.110.1.2.1.1.1 | rlLldpXMedLocMediaPolicyContainerIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.2 | rlLldpXMedLocMediaPolicyContainerAppType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.3 | rlLldpXMedLocMediaPolicyContainerVlanID | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.4 | rlLldpXMedLocMediaPolicyContainerPriority | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.5 | rlLldpXMedLocMediaPolicyContainerDscp | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.6 | rlLldpXMedLocMediaPolicyContainerUnknown | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.8 | rlLldpXMedLocMediaPolicyContainerPorts | 0 | 0 | |
| 1.3.6.1.4.1.11.2.110.1.2.1.1.9 | rlLldpXMedLocMediaPolicyContainerRowStatus | 0 | 0 |