OID reference
1.3.6.1.4.1.11.2.129.12
the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is that Ipv6 interface …
Identification
{1 3 6 1 4 1 11 2 129 12}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlipv6EnabledByDefaultRemovedIfindex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user
on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is
that Ipv6 interface must be added. "
DEFVAL{ 0 }
::= { rlIPv6 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is that Ipv6 interface must be added.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlipv6EnabledByDefaultRemovedIfindex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlipv6EnabledByDefaultRemovedIfindex",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is that Ipv6 interface must be added. \"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlIPv6",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is that Ipv6 interface must be added."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-IPv6
See published definition above
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IPv6
{'HPE-IP': ['ipSpec'], 'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['ipAddressEntry', 'ipv6InterfaceEntry', 'ipNetToPhysicalEntry', 'ipv6RouterAdvertEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TimeInterval', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'IpAddress', 'mib-2', 'Unsigned32', 'Counter64', 'zeroDotZero', 'Gauge32'], 'IANAifType-MIB': ['IANAtunnelType'], 'IP-FORWARD-MIB': ['inetCidrRouteEntry'], 'IANA-RTPROTO-MIB': ['IANAipRouteProtocol'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddressType', 'InetAddress', 'InetAutonomousSystemNumber']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.129.1 | rlipv6IcmpErrorRatelimitInterval | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.2 | rlipv6IcmpErrorRatelimitBucketSize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.3 | rlipv6LLDefaultZone | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.4 | rlIpv6GeneralPrefixTable | 1 | 7 | |
| 1.3.6.1.4.1.11.2.129.5 | rlipv6MaximumHopsNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.6 | rlIpv6RouterAdvertPrefixTable | 1 | 13 | |
| 1.3.6.1.4.1.11.2.129.7 | rlIpv6RouterAdvertTable | 1 | 4 | |
| 1.3.6.1.4.1.11.2.129.8 | rlipv6InetCidrTableClear | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.9 | rlIpv6PathMtuTable | 1 | 5 | |
| 1.3.6.1.4.1.11.2.129.10 | rlIpNetToPhysicalTableClearTable | 1 | 3 | |
| 1.3.6.1.4.1.11.2.129.11 | rlIpv6HostForwardingTable | 1 | 9 | |
| 1.3.6.1.4.1.11.2.129.13 | rlManagementIpv6 | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.14 | rlManagementIpv6Action | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.15 | rlIpv6TunnelToIPv6DbTable | 1 | 9 | |
| 1.3.6.1.4.1.11.2.129.16 | rlIpv6DefaultTC | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.17 | rlIpv6DefaultUP | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.18 | rlIpv6MtuSize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.129.19 | rlInetStaticRouteAuxMappingTable | 1 | 4 |