Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpnicfSysImageType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"main",
"(",
"1",
")",
",",
"backup",
"(",
"2",
")",
",",
"none",
"(",
"3",
")",
",",
"secure",
"(",
"4",
")",
",",
"main-backup",
"(",
"5",
")",
",",
"main-secure",
"(",
"6",
")",
",",
"backup-secure",
"(",
"7",
")",
",",
"main-backup-secure",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure. If the value is 'backup(2)', the image will be used if the main image fails. If the value is 'secure(4)', the image will be used if the main image and backup image both fail. If the value is 'none(3)',the image will not be used in the next reloading procedure. At the same time,you also can specify the main image by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. If the image is different from previous main image, the previous main image will not be main image again. And the image table will update with this variation. Vice versa, if you have defined the reload schedule, and then you define a new main image through hpnicfSysImageType when you are waiting the reload schedule to be executed, the real main image will be the latest one. It is strongly suggested to define the main image here, not by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. There are some rules for setting the value of hpnicfSysImageType: a)When a new image file is defined as 'main' or 'backup' file,the hpnicfSysImageType of old 'main' or 'backup' file will automatically be 'none'. b)It is forbidden to set 'none' attribute manually. c)It is forbidden to set 'secure' attribute manually. d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa. At this time, the file has 'main-backup' property. e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property. f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property. g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property. The following table describes whether it is ok to set to another state directly from original state. +--------------+-----------+-------------+-------------+ | set to | set to | set to | set to | | | | | | original | 'main' | 'backup' | 'none' | 'secure' | state | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | main | --- | yes | no | no | | | | | | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | backup | yes | --- | no | no | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | | | | | | none | yes | yes | --- | no | | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | secure | yes | yes | no | --- | | | | | | | | | | | --------------+--------------+-----------+-------------+-------------+ If there is one main image in the system, one row of HpnicfSysReloadScheduleEntry whose hpnicfSysReloadImage is equal to the main image's hpnicfSysImageIndex will be created automatically. But if any row is deleted, it will not be created automatically in hpnicfSysReloadScheduleTable. For the device which doesn't support dual image(main/backup): Only 'main' and 'none' is supported and it only can be set from none to main. When a new image file is defined as 'main' file,the hpnicfSysImageType of old 'main' file will automatically be 'none'. \"",
"::=",
"{",
"hpnicfSysImageEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"main",
1
],
[
"backup",
2
],
[
"none",
3
],
[
"secure",
4
],
[
"main-backup",
5
],
[
"main-secure",
6
],
[
"backup-secure",
7
],
[
"main-backup-secure",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure. If the value is 'backup(2)', the image will be used if the main image fails. If the value is 'secure(4)', the image will be used if the main image and backup image both fail. If the value is 'none(3)',the image will not be used in the next reloading procedure. At the same time,you also can specify the main image by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. If the image is different from previous main image, the previous main image will not be main image again. And the image table will update with this variation. Vice versa, if you have defined the reload schedule, and then you define a new main image through hpnicfSysImageType when you are waiting the reload schedule to be executed, the real main image will be the latest one. It is strongly suggested to define the main image here, not by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. There are some rules for setting the value of hpnicfSysImageType: a)When a new image file is defined as 'main' or 'backup' file,the hpnicfSysImageType of old 'main' or 'backup' file will automatically be 'none'. b)It is forbidden to set 'none' attribute manually. c)It is forbidden to set 'secure' attribute manually. d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa. At this time, the file has 'main-backup' property. e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property. f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property. g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property. The following table describes whether it is ok to set to another state directly from original state. +--------------+-----------+-------------+-------------+ | set to | set to | set to | set to | | | | | | original | 'main' | 'backup' | 'none' | 'secure' | state | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | main | --- | yes | no | no | | | | | | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | backup | yes | --- | no | no | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | | | | | | none | yes | yes | --- | no | | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | secure | yes | yes | no | --- | | | | | | | | | | | --------------+--------------+-----------+-------------+-------------+ If there is one main image in the system, one row of HpnicfSysReloadScheduleEntry whose hpnicfSysReloadImage is equal to the main image's hpnicfSysImageIndex will be created automatically. But if any row is deleted, it will not be created automatically in hpnicfSysReloadScheduleTable. For the device which doesn't support dual image(main/backup): Only 'main' and 'none' is supported and it only can be set from none to main. When a new image file is defined as 'main' file,the hpnicfSysImageType of old 'main' file will automatically be 'none'."
],
null,
null,
null,
null
]
}