{1 3 6 1 4 1 11 2 14 11 15 2 75 3 1 1 1 34}
Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data.
Status in source: current.
Names: hpnicfDot11StationPowerSaveModeCM
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpnicfDot11StationPowerSaveModeCM",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"0",
")",
",",
"powersave",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data.\"",
"DEFVAL",
"{",
"active",
"}",
"::=",
"{",
"hpnicfDot11StationAssociateEntry",
"34",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
0
],
[
"powersave",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data."
],
null,
null,
null,
[
"DEFVAL",
"active"
]
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPN-ICF-DOT11-STATION-MIB
hpnicfDot11StationPowerSaveModeCM OBJECT-TYPE
SYNTAX INTEGER
{
active(0),
powersave(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the power management mode of the client.
The following values are supported:
active - This client is not in power-save
mode and it is actively sending or receiving data.
powersave - This client is in power-save mode and
it wakes up after some time to check for buffer data."
DEFVAL { active }
::= { hpnicfDot11StationAssociateEntry 34 }{'SNMPv2-TC': ['MacAddress', 'DateAndTime', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'IpAddress', 'TimeTicks'], 'HPN-ICF-DOT11-REF-MIB': ['hpnicfDot11', 'HpnicfDot11RadioType', 'HpnicfDot11ObjectIDType', 'HpnicfDot11ChannelScopeType', 'HpnicfDot11SSIDStringType', 'HpnicfDot11AuthenType', 'HpnicfDot11AKMType', 'HpnicfDot11CipherType', 'HpnicfDot11RadioScopeType', 'HpnicfDot11SSIDEncryptModeType', 'HpnicfDot11AssocFailType', 'HpnicfDot11AuthorFailType', 'HpnicfDot11SecIEStatusType', 'HpnicfDot11RadioType2']}Related source files and packages:
Downloaded: 2026-10-23T19:25:40.519297+00:00.
Vendor MIB copy from the Netdisco archive.
Module: HPN-ICF-DOT11-STATION-MIB
hpnicfDot11StationPowerSaveModeCM OBJECT-TYPE
SYNTAX INTEGER
{
active(0),
powersave(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the power management mode of the client.
The following values are supported:
active - This client is not in power-save
mode and it is actively sending or receiving data.
powersave - This client is in power-save mode and
it wakes up after some time to check for buffer data."
DEFVAL { active }
::= { hpnicfDot11StationAssociateEntry 34 }{'SNMPv2-TC': ['MacAddress', 'DateAndTime', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'IpAddress', 'TimeTicks'], 'HPN-ICF-DOT11-REF-MIB': ['hpnicfDot11', 'HpnicfDot11RadioType', 'HpnicfDot11ObjectIDType', 'HpnicfDot11ChannelScopeType', 'HpnicfDot11SSIDStringType', 'HpnicfDot11AuthenType', 'HpnicfDot11AKMType', 'HpnicfDot11CipherType', 'HpnicfDot11RadioScopeType', 'HpnicfDot11SSIDEncryptModeType', 'HpnicfDot11AssocFailType', 'HpnicfDot11AuthorFailType', 'HpnicfDot11SecIEStatusType', 'HpnicfDot11RadioType2']}Related source files and packages:
Downloaded: 2026-10-24T15:28:10.501993+00:00.