{1 3 6 1 4 1 11 2 14 11 15 2 75 8 1 2 1 9}
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
Status in source: current.
Names: hpnicfDot11RRMCfgIntrfThres
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpnicfDot11RRMCfgIntrfThres",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"40",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"2270657263656e7422"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.\"",
"DEFVAL",
"{",
"50",
"}",
"::=",
"{",
"hpnicfDot11RRMRadioCfgEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
40,
100
]
]
]
],
[
"UNITS",
"percent"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation."
],
null,
null,
null,
[
"DEFVAL",
50
]
]
}Vendor MIB copy from the Netdisco archive.
Module: HPN-ICF-DOT11-RRM-MIB
hpnicfDot11RRMCfgIntrfThres OBJECT-TYPE
SYNTAX Integer32 (40..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the interface threshold.
By default, interference observed on an operating channel is considered
during dynamic frequency selection and transmit power control. If the
interference percentage on the channel reaches the set threshold, RRM
will perform resource adjustment to control the situation."
DEFVAL { 50 }
::= { hpnicfDot11RRMRadioCfgEntry 9 }{'SNMPv2-TC': ['TruthValue', 'MacAddress', 'DateAndTime', 'RowStatus'], 'SNMPv2-SMI': ['Integer32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'HPN-ICF-DOT11-REF-MIB': ['HpnicfDot11RadioType', 'HpnicfDot11ChannelScopeType', 'HpnicfDot11RadioElementIndex', 'HpnicfDot11RadioScopeType', 'hpnicfDot11APElementIndex', 'hpnicfDot11', 'HpnicfDot11ObjectIDType', 'HpnicfDot11SSIDStringType']}Related source files and packages:
Downloaded: 2026-10-24T15:28:10.499993+00:00.
Status in source: current.
Names: hpnicfDot11RRMCfgIntrfThres
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hpnicfDot11RRMCfgIntrfThres",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"2270657263656e7422"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.\"",
"DEFVAL",
"{",
"50",
"}",
"::=",
"{",
"hpnicfDot11RRMRadioCfgEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
100
]
]
]
],
[
"UNITS",
"percent"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation."
],
null,
null,
null,
[
"DEFVAL",
50
]
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPN-ICF-DOT11-RRM-MIB
hpnicfDot11RRMCfgIntrfThres OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the interface threshold.
By default, interference observed on an operating channel is considered
during dynamic frequency selection and transmit power control. If the
interference percentage on the channel reaches the set threshold, RRM
will perform resource adjustment to control the situation."
DEFVAL { 50 }
::= { hpnicfDot11RRMRadioCfgEntry 9 }{'SNMPv2-TC': ['TruthValue', 'MacAddress', 'DateAndTime', 'RowStatus'], 'SNMPv2-SMI': ['Integer32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'HPN-ICF-DOT11-REF-MIB': ['HpnicfDot11RadioType', 'HpnicfDot11ChannelScopeType', 'HpnicfDot11RadioElementIndex', 'HpnicfDot11RadioScopeType', 'hpnicfDot11APElementIndex', 'hpnicfDot11', 'HpnicfDot11ObjectIDType', 'HpnicfDot11SSIDStringType']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.392272+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.1 | hpnicfDot11RRMRadioType | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.2 | hpnicfDot11RRMCfgChlState | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3 | hpnicfDot11RRMCfgChlMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4 | hpnicfDot11RRMChlProntoRadioElmt | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.5 | hpnicfDot11RRMCfgPwrState | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.6 | hpnicfDot11RRMCfgPwrMode | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7 | hpnicfDot11RRMPwrProntoRadioElmt | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.8 | hpnicfDot11RRMCfgIntrvl | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.10 | hpnicfDot11RRMCfgNoiseThres | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.11 | hpnicfDot11RRMCfgPERThres | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.12 | hpnicfDot11RRMCfgToleranceFctr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.13 | hpnicfDot11RRMCfgAdjacencyFctr | 0 | 0 |